Avantree WP400 Cyclone Outdoor Wireless Speaker User Manual
- June 5, 2024
- Avantree
Table of Contents
- Avantree WP400 Cyclone Outdoor Wireless Speaker
- Outdoor wireless speaker overview
- Three playing modes
- Power O#n / Off
- Pair and connect with Bluetooth-enabled devices (with no micro SD card
- Connect with NFC enabled mobile phone
- How to use
- How to charge
- How to install the bike mount
- Product specifications
- Troubleshooting
- CC Rules.
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Avantree WP400 Cyclone Outdoor Wireless Speaker
Outdoor wireless speaker overview
NOTE: All accessories are also available on avantree.com
Three playing modes
There are three playing modes. You can short press M button to switch among
the three modes.
When three modes are all available, the first priority is Aux-in mode, and the
second priority is micro SD card mode. If no micro SD card is inserted nor
Aux-in, it will enter Bluetooth mode directly.
Aux in mode: connect by 3.5mm audio cable
Mirco SD card mode: need to insert a micro SD card (Please buy separately)
Note: The speaker needs 30-40s to read card before streaming audio.
Please wait for a while after powering it on.
Bluetooth mode: pair and connect through Bluetooth
Power O#n / Off
Power ON: Press and hold the POWER button for 2–3s, and you will hear a
tone with
the according to mode to indicate it has switched on.
Note: It will automatically turn off if not connected to any device in
Bluetooth mode or paused in micro SD card mode over 10 minutes.
Power OFF:
Press and hold the POWER button for 2–3s, and you will hear a two-tone beep to
indicate it has switched off.
Pair and connect with Bluetooth-enabled devices (with no micro SD card
inserted nor Aux in)
- STEP 1 Get Cyclone into pairing mode – Press and hold the POWER button for 2–3 seconds until you hear a tone with “Bluetooth mode”, and the LED indicator flashes quickly.
- STEP 2 Activate Bluetooth on your phone/PC/notebook and select ‘Avantree Cyclone’.
- STEP 3 Once connected, you will hear a tone with “connected” and the LED indicator will stay blue.
Note: Make sure your PC/notebook is Bluetooth enabled and supports A2DP profile; otherwise you may need a Bluetooth audio adapter. For details on how to set up with your PC/notebook, please see support.avantree.com.
Reconnect Bluetooth
Once paired, whenever you turn Cyclone on again it will be automatically
reconnected to the latest device.
Connect with NFC enabled mobile phone
-
STEP 1 Turn on your speaker. Make sure the NFC function is turned on from your phone settings and the screen is active and unlocked.
-
STEP 2 Hold the NFC mobile phone against the NFC zone of the speaker (on the bottom) until your mobile phone plays an indicated note. (Some phones will vibrate and some will have a beep sound.)
-
STEP 3 Then your phone will get a reception request if you would like to pair with the speaker.
STEP 4 Tap “Yes”, then your mobile phone will connect with your Cyclone with a tone of “connected”. -
STEP 5 Tap it again to disconnect with a tone of “pairing”
NOTE: Since the NFC antenna is located in different locations for different phones, it is helpful to know the location for fast pairing. For details on NFC, see your phone’s user manual.
How to use
How to charge
When the battery power is low, a tone with “Lower battery, please charge.” will come out every 25S. Please charge the speaker. Otherwise, it will turn off automatically soon. Please charge the speaker via the Micro USB charging port DC 5V by using the Micro USB cable. It normally takes about 3.5 hours to fully charge the battery. The indicator will stay red when charging and will turn off when fully charged.
Charging requirement: You can plug our supplied Micro USB cable to your own USB charger (wall charger /travel charger/car charger, etc) with 5V / 500Ma -2A. It is OK to use most mobile phone chargers on the market.
How to install the bike mount
- Step 1: Bind the silicon belt on the bike frame if needed
- Step 2: Fix the mount to the bike with screws
- Step 3: Install the Speaker to the mount
Please search “Avantree Cyclone” on YouTube or visit the below link directly to watch the video user guide. https://www.youtube.com/watch?v=bG70rrqA9Mo
Product specifications
- BT Version: 3.0, Class 2
- Support Bluetooth HSP, HFP, A2DP and AVRCP Profiles
- Micro SD card support: MP3, WAV format
- Storage capacity: Max 32GB
- Output power: 5W x 2
- Built-in battery: 1400mAh
- Talk time: up to 6 hours
- Music time: up to 6 hours
- Standby Time: 40 hours
- Charge time: About 3.5 hours
- Operational range: up to 10 meters
- Frequency Responds range: 100Hz ~ 20 kHz
- Size: 180mm x 70mm x 70mm
- Net Weight: 433g
For more FAQ information, please refer to support.avantree.com
Troubleshooting
-
How to reset if the speaker doesn’t work?
Please press and hold the button for 1 second until the LED indicator is off. Then power on again to use. -
The speaker can not read the micro SD card.
Please check the audio source format is MP3 or WAV. The size of the micro SD card is the same as those used on phones.
CC Rules.
This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm the radiator
of your body: Use only the supplied antenna.
Dispose of the packaging and this product in accordance with the latest
provisions.
Any questions? Contact:
Support@avantree.com
Telephone Support (Mon-Fri):
- USA / CANADA +1 800 232 2078 (EN, PST 9am-5pm)
- UK: +44 20 8068 2023 (EN, CET 10am-7pm)
- Germany: +49 32221097297 (DE, CET 10am-7pm)
- Italy: +39 06 9480 3330 (IT, CET 9:30am-12:30am)
- France: + 33 176340312 (FR, CET 8am-10am)
- Spain: + 34 931786261 (ES, CET 2:30pm-4:30pm)
- Asia: + 86 755 8228 1190 / 7741-7746 (CN & EN, BJT 9am-5pm)
- Australia: + 61 2 8310 9897 (CN & EN, BJT 9am-5pm)
Self-service Support:
- 100+ Step by step video Guide – youtube.com/avantree/playlists
- 300+ FAQ: support.avantree.com
References
- Wireless TV Headphones, Devices, and Audio Solutions | Avantree
- Support Center | Avantree
- Contact Us
- YouTube