TESLA Split Type Air Conditioner User Manual
- June 6, 2024
- Tesla
Table of Contents
- TESLA Split Type Air Conditioner User Manual
- WI-FI MODULE SPECIFICATION AND OPERATION GUIDELINE
- INSTALLATION OF THE WI-FI MODULE (OPTIONAL)
- DOWNLOAD AND INSTALL THE APP
- For Android smartphones
- REGISTRATION
- LOGIN
- REGISTRATION
- LOGIN
- Forgot the password
- ADDING DEVICES
- 1. BT mode (optional)
- 2. AP mode
- AIR CONDITIONER CONTROL
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
TESLA Split Type Air Conditioner User Manual
WI-FI MODULE SPECIFICATION AND OPERATION GUIDELINE
- Minimum specifications on a smartphone: Android 5.0 version or higher IOS 9.0 version or higher
- Basic parameters for Wi-Fi module
Parameters| Details
---|---
Network frequency| 2.400 – 2.4835 GHz
Standards of WLAN
| IEEE 802.11 b/g/n
(channels 1-14,channels 1-13 for EU/AU,channels 1-11 for US/CA)
Protocol stack support| IPv4/TCP/UDP/HTTPS/TLS/DNS
Security support| WEP/WPA/WPA2/AES128
Network type support| STA/AP/STA+AP
Max. RF Power| 18.5 dbm
Blue tooth frequency| 2.402 – 2.480 GHz
Blue tooth RF Power| 9 dbm
3. Operation guideline. Please use the simple guideline instructions below as reference.
Operation Steps| Operation Items| New Account| Re-install APP (registered
before)
---|---|---|---
Step 1| Download and Install APP| YES| YES
Step 2| Activate APP| YES| YES
Step 3| Account Registration| YES| NO
Step 4| Login| YES| YES
Step 5| Add Device to control| YES| Registered Device will remain
Note: If you registered the account and added device before, when you re- install the APP again and login, the added device will remain.
INSTALLATION OF THE WI-FI MODULE (OPTIONAL)
-
Open the panel of indoor unit
-
Take off the cover of USB Wi-Fi, follow the arrow and insert the USB Wi-Fi module into the reserved USB slot on the frame.
DOWNLOAD AND INSTALL THE APP
For Android smartphones
For IOS smartphones
Method 1: Please scan the QR code with a browser scanner, download and install
the APP.
Method 2: Open the Google “Play Store” on your smartphone and search “Tesla
Smart”, download and install the APP.
Method 1: Please scan the QR code and follow the tips to get into “AppStore”,
download and install the APP.
Method 2: Open the Apple “AppStore” on your smartphone and search “Tesla Smart
Things”, download and install the APP.
Note: Please enable the Storage/Location/Camera permissions for this APP during the installation. Otherwise it will have some problems when operating
REGISTRATION
- If you don’t have an account please tap the “Register” button.
- Read the Privacy Policy and tap “Agree”.
LOGIN
- Tap “Sign in with an existing account”.
- Enter your registered account username and password.
- Tap the “Sign in” button.
REGISTRATION
- Tap “Sign in with an existing account”.
- Enter your registered account username and password.
- Tap the “Sign in” button.
LOGIN
- Tap “Log in with existing account”.
- Enter your registered account username and password.
- Tap “Log in” button.
Forgot the password
If you forgot the password or you want to reset the password, follow these steps:
- Tap “Forgot password”.
- Enter your account username (e-mail address) and tap the “Obtain verification code” button.
- Enter the verification code received via e-mail.
- Set the new password and tap the “Done” button.
ADDING DEVICES
There are 2 methods to add the device.
1. BT mode (optional)
- Power on the indoor unit
- Reset the modem by pressing “ECO” 6 times on the remote, within 10 seconds
- Click “+” in the upper right corner of the Home screen, “Devices to be added” window will pop up.
- Select “Go to add”
- Click “+” in the upper right corner
- Input the password of the Wi-Fi to which your smartphone is connected, then tap “Next”.
- You can see the percent rate of the connection process, “Device found” “Register Device to Smart Cloud” “Initializing Device…”
- You can rename your device
- Your device will appear on the Home screen.
2. AP mode
- Power on the indoor unit
- Click “+” in the upper right corner of the Home screen
- Select “Do not add”
- Select “Large Home Appliances”
- Tap the “Air conditioner (BT+Wi-Fi)” logo
- Tap + in the upper right corner and choose “EZ Mode”, follow the comments on the screen to reset the Wi-Fi module modem is reset by pressing “ECO” button 6 times on the remote, within
- seconds check “Confirm the device is reset” and tap “Next”
- Input the password of the Wi-Fi to which your smartphone is connected, then tap “Next”
- Read the instruction carefully and tap “Connect now”
- You can see the percent rate of the connection process, in real time.
AIR CONDITIONER CONTROL
The device control screen will pop up automatically after adding the device.
The device control screen will pop up manually by tapping the device name on
the Home screen.