POLSEN MVP-3 Micro Directional Shotgun Microphone for DSLR User Manual

MVP-3
MICRO DIRECTIONAL SHOTGUN MICROPHONE
FOR DSLR, SMARTPHONES AND PORTABLE RECORDERS
PRODUCT MANUAL

THANK YOU FOR CHOOSING POLSEN.

The Polsen MVP-3 Micro Shotgun Microphone boasts a lightweight and compact yet rugged all-metal design that’s perfect for live and in-the-field recordings like mobile journalism, vlogging, and run & gun productions. The MVP-3 can be mounted on a camera’s shoe mount or onto a tripod, and it plugs into a DSLR, smartphone, or portable recorder’s 1/8-inch audio input jack to deliver professional-quality sound.
The microphone’s cardioid polar pattern and shotgun design optimize the microphone to focus on the subject while rejecting off-axis sound and noise. To minimize handling noise and any vibrations that might affect your recording, the MVP-3 comes with its own shock mount. Anti-interference design assures an audio signal that’s free of buzz and hum from EM or RF interference.

PRECAUTIONS

• Please read and follow these instructions, and keep this manual in a safe place.
•  Keep this product away from water and any flammable gases or liquids.
•  Use only the batteries recommended in this manual.
• Do not attempt to disassemble or repair this product yourself.
• Handle this product with care. · Clean this product with only a soft, dry cloth. · Make sure that this product is intact and that there
  are no missing parts. · To avoid damaging the product, remove the battery during long periods of nonuse. · All images are for illustrative purposes only.

OVERVIEW

1. Microphone ports
2. 1/8 in. audio connector
3. Smartphone audio cable
4.  Camera audio cable
5. Wind muff
6. Foam windscreen
7. Shock mount
8. Carry case

THE WINDSCREENS

The MVP-3 comes with a foam windscreen to reduce wind noise in a light breeze, and a wind muff for minimizing wind noise in moderate breezes. Fit the windscreen or wind muff onto the microphone by rotating the windscreen while gently pushing it onto the microphone barrel. Make sure that the windscreen or wind muff covers all the ports on the sides of the microphone barrel.

DSLR MOUNTING AND OPERATING THE MVP-3

1. Rotate the shock mount’s locking wheel counterclockwise to loosen it.
2. Slide the mounting foot all the way into your camera’s hot shoe.
3.  Rotate the locking wheel clockwise until secure.
4. If needed, place the foam windscreen or wind muff onto the microphone, and press the MVP-3 into the shock-mount suspenders.
5. Plug the smartphone audio cable or the camera audio cable into the microphone’s 1/8 in. output, and plug the other end to the 1/8 in. audio input jack on the recording device or camera.

TRIPOD USE

The shock mount is equipped with a 1/4-20 socket for mounting the MVP-3 onto a tripod.

1. Screw the shock mount onto a tripod’s 1/4-20 stud until it’s secure.
2. Fit the desired windscreen on the microphone, and place the MVP-3 into the shock mount.

SMARTPHONE USE

Insert the smartphone into a smartphone video rig or handheld rig, and mount the MVP-3 onto an available shoe mount or 1/4-20 stud.

FREQUENCY RESPONSE

CARDIOID POLAR PATTERN

TROUBLESHOOTING

• Make sure the microphone’s audio cable is fully plugged in to the camera, smartphone, or recorder audio input jack.
• Decrease the audio input level on the recording device.
• If there is no input level control, move the microphone farther away from the source.

The sound is too low.|

• Make sure the microphone’s audio cable is fully plugged in to the camera, smartphone, or recorder audio input jack.
• Increase the audio input level on the recording device.

SPECIFICATIONS

Diameter: 0.8 in. (2.1 cm)
Weight| 1.2 oz. (34.2 g)

References

• Gradus | Gradus Group
• Polsen | Microphones & Accessories, Headphones, Megaphones, Computer Audio Hardware & Live Sound

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>