Yale YRCB-490-CB1-WSP Smart Cabinet Lock Instruction Manual

June 5, 2024
Yale

Smart Cabinet Lock Installation Instructions
Glow in the Dark Emergency Release

Yale YRCB 490 CB1 WSP Smart Cabinet Lock

If you have any questions while installing, call our 24/7 tech
support team! Call 1-855-213-5841 or email Support@YaleLock.com

Yale YRCB 490 CB1 WSP Smart Cabinet Lock - parts 1

Failure to follow these instructions could result in damage to the product and void the factory warranty

Download the Yale Access App

Yale YRCB 490 CB1 WSP Smart Cabinet Lock - Access App

Insert CR2 Battery Into Lock body

Yale YRCB 490 CB1 WSP Smart Cabinet Lock - Insert CR2

Attach 3M Tape to Mounting

Bracket and Lock Post

Yale YRCB 490 CB1 WSP Smart Cabinet Lock - Attach 3M

Slide Mounting Bracket onto Bottom of the Lock body

Slide Lock Post Guide onto Lock Post

Attach Lock Post to Lock body

Install Smart Cabinet Lock

Yale YRCB 490 CB1 WSP Smart Cabinet Lock - Cabinet
Lock

Attach Lock Post to Door

Test Operation

Remove Lock Post Guide

Yale YRCB 490 CB1 WSP Smart Cabinet Lock - Lock Post Guide
2

Congratulations! You’ve installed the Yale® Smart Cabinet Lock.
Follow the steps in your Yale Access app to complete the setup process.

NOTE TO INSTALLER AND CONSUMER
A second lock post is provided as a spare in the event the cabinet door must be forced open and the installed lock post is broken.

  Screw Mounting

 Top Of Cabinet Installation

 Double Door Plate

Yale YRCB 490 CB1 WSP Smart Cabinet Lock - Double Door
Plate

 Long Lock Post

The Long Lock Post is used on cabinets with a face frame or lip no taller than 1” and no deeper than 1-1/4”.

Yale YRCB 490 CB1 WSP Smart Cabinet Lock - Long Lock
Post

The mounting template cannot be used to position the lock when using a long lock post.

Warning: Changes or modifications to this device, not expressly approved by Yale Home could void the user’s authority to operate the equipment.

FCC:
Contain FCC ID: 2ABFG-YRIZW2USTS1
Model: YRCB-490-BLE-WSP

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

Industry Canada:
Contain 11626A-YRIZW2USTS1
Model: YRCB-490-BLE-WSP

Section 7.1.2 of RSS-GEN Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

Section 7.1.3 or RSS-GEN This Device complies with Industry Canada License- exempt RSS standard(s). Operation is subject to the following two conditions:

  1. this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device.

This radio transmitter 6982A-YRHCPZW0FM has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain
indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

CAN ICES-3B/NMB-3B

Yale Home

24/7 Product Support: 1-855-213-5841
www.US.YaleHome.com
Yale® is a registered trademark of Yale Home. Other products’ brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only.
© Copyright 2020. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Home is prohibited.

Trusted every day
YRCB490-MNL-0014 Rev B
Part of ASSA ABLOY

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals