KAYOBA 022864 Radio Controlled Dinosaur Instruction Manual

June 3, 2024
KAYOBA

KAYOBA 022864 Radio-Controlled Dinosaur

Jula AB reserves the right to make changes to the product. Jula AB claims copyright on this documentation. It is not allowed to modify or alter this documentation in any way and the manual shall be printed and used as it is in relation to the product. For the latest version of operating instructions, refer to the Jula website

EU DECLARATION OF CONFORMITY

  • Item number 022864
  • Jula AB, Box 363, SE-532 24 SKARA, SWEDEN
  • This declaration of conformity is issued under the sole responsibility of the manufacturer.
  • RADIO CONTROLLED DINOSAUR

Conforms to the following directives, regulations and standards:

Regulation

Regulation standard
TSD 2009/48/EC EN 71-1:2014+A1, EN 71-2:2020, EN 71-3:2019+A1
RED 2014/53/EU EN 62479:2010, EN 50633:2017, EN IEC 62115:2020+A11,
ETSI EN 301 489-1 V2.2.3:2019, ETSI EN 301 489-3 V2.2.1:2019,
ETSI EN 301 489-17 V3.2.4:2019, ETSI EN 300 440 V2.1.1
RoHS 2011/65/EU + 2015/863 EN 50581:2012

SAFETY INSTRUCTIONS

  • Failure to handle batteries carefully and/or incorrect use can result in a risk of fire, explosion, deformation and/or leakage, which can in turn result in personal injury and/or material damage. Follow all the instructions and safety instructions.
  • Avoid contact with battery fluid. If you get battery fluid on your skin or in your eyes, rinse immediately with water for at least 10 minutes and then seek medical attention.
  • Switch off the product immediately with the power switch if the battery emits smoke or an abnormal smell.
  • Only charge the battery with the supplied charger cable.
  • Do not overcharge the battery. Unplug the charger cable when the battery is fully charged.
  • Do not leave the battery unattended when charging.
  • Allow the battery to cool before charging.
  • Remove the batteries from the product and the remote control when the product is not in use.
  • Do not expose batteries to high temperatures. Do not burn batteries.

SYMBOLS

  • Read the instructions.
  • Approved in accordance with the relevant directives.
  • Recycle discarded product in accordance with local regulations.

TECHNICAL DATA

  • Battery type, remote control 2x AA (LR6) 1.5 V
  • Frequency, radio signal 2.4 GHz
  • Size L42xW12xH20 cm

DESCRIPTION

Dinosaur with audio and light functions that are controlled via the supplied remote control. Rechargeable battery and charger included for the dinosaur. Batteries for the remote control are not included and are sold separately in Jula’s department stores and at www.jula.com.

**Package contents

KAYOBA 022864 Radio-Controlled Dinosaur FIG
\(1\)**

  1. Dinosaur
  2. Remote control
  3. Battery
  4. USB charging cable
  5. Instructions

USE

BATTERY

Inserting the battery
Open the battery cover underneath the dinosaur and insert the rechargeable battery.

NOTE:
When the battery is in place, put the power switch in position ON to set the right frequency

PAIRING

Switch on the remote control first, the LED indicator on the remote control starts to flash. Then switch on the dinosaur, the back lighting of the dinosaur starts to flash and the red indicator on the remote control will turn off, which means paring is successfull. lf the dinosaur is turned on first, just turn on the controller and play with it, if it does not work, try to turn off the controller and the dinosaur, then start paring again or recharge the battery of the dinosaur.

Charging the battery

  1. Remove the battery from the battery compartment in the product.

  2. Connect the USB cable to the battery and to a USB port on a USB charger.
    KAYOBA 022864 Radio-Controlled Dinosaur FIG \(2\)

  3. The red light on the USB cable turns on when charging. When the battery is fully charged the red light turns off. It takes about 120 minutes before it is fully charged.

  4. Put the battery in the battery compartment and connect the cable to the product

REMOTE CONTROL

The remote control is used to control the product.

  1. Go forward
  2. Turn dinosaur head to left
  3. LED light
  4. Turn dinosaur head to right
  5. Turn left
  6. Turn right
  7. Audio mode
  8. Power switch
  9. Automatic mode
  10. Go back

HOW TO USE

  • Press the forward button to go forwards.

  • Press the backwards button to go backwards.
    KAYOBA 022864 Radio-Controlled Dinosaur FIG \(4\)

  • Press the left turn button to turn to the left. Press the right turn button to turn to the right.
    KAYOBA 022864 Radio-Controlled Dinosaur FIG \(5\)

  • Press the left turn button to turn to the head to the left.

  • Press the right turn button to turn to the head to the right.
    KAYOBA 022864 Radio-Controlled Dinosaur FIG \(7\)

  • When the button for automatic mode is pressed the product goes automatically forward, backward, to the left and to the right.
    KAYOBA 022864 Radio-Controlled Dinosaur FIG \(8\)

  • Click the sound button for first three times, it shows 3 different dinosaur sound. Click the sound button for forth times, the sound effect will be turned off.KAYOBA 022864 Radio-Controlled Dinosaur FIG \(9\)

TROUBLESHOOTING

Problem Possible cause Action


It is not possible to control the product.

| The remote control and/or the product is not on.| Switch on the remote control and/or the product.
No batteries in remote control.| Insert batteries in the remote control.
The product battery is not fully charged.| Charge the battery.


The product stops working.

| The batteries for the remote control and/or the product need to be charged or replaced.| Replace the batteries in the remote control and charge the product battery.

WWW.JULA.COM
JULA AB 2022-09-09 JULA AB BOX 363, 532 24 SKARA, SWEDEN

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

KAYOBA User Manuals

Related Manuals