Kruger Matz KM2240 Wi-Fi Surveillance Projector System Owner’s Manual
- June 5, 2024
- Kruger Matz
Table of Contents
KM2240 Wi-Fi Surveillance Projector System
Owner’s Manual
SAFETY INSTRUCTIONS
- Before the installation, make sure to read up on local recording and surveillance systems restrictions.
- Protect the device from exposure to high or low temperatures.
- Protect the device from water and other liquids. Do not handle this device with wet hands.
- Do not use the device where it is prohibited to use the 2,4 GHz band.
- Before cleaning the device, make sure that is unplugged from power.
- Clean this device regularly, with a soft, dry cloth, without abrasive agents.
- Do not disassemble or try to repair the device. In case of damage or malfunction, contact the authorized service point.
PRODUCT DESCRIPTION
- Power indicator
- Network indicator
- HDD indicator
- Antenna
- Ethernet port
- VGA output
- HDMI output
- USB ports
- Power socket
- Camera lens
- IR sensors
- Reset/pairing button
|
---|---
INSTALLATION
NVR
-
Connect a monitor (or different display) to the VGA or HDMI output.
-
Connect the mouse to the USB port.
-
Connect the power adapter to the power supply socket.
Connect the power adapter to a power outlet. -
Optional: connect the Ethernet cable to the Ethernet port.
Camera
- Mount the camera in a place that you chose.
- Connect the power adapter to the camera and to the power outlet.
Hard drive
- Unscrew 4 screws that hold the case.
- Slide the cover to the back and lift it up.
- Connect the SATA plugs to the disk.
- Screw the disk down with provided screws.
- Put the cover back and screw it in.
OPERATION
-
After connecting the power adapter to the power outlet, the NVR will turn on automatically.
-
When you first turn on the NVR, the configuration wizard will be displayed.
-
Log in to the admin account. The default password is admin.
a. Set the date, time, language, and resolution. Press the Next button.
b. The list with connected drives will be shown. You can perform a drive format (with the Format button) and set the action after filling the drive.
Press the Next button.
c. Scan the QR code and download the Tuya app.
d. If the Tuya app has been configured, scan the provided QR code to gain access to the camera preview in the app. To do this, check the “App pairing” paragraph. Press the Finish button. The NVR is ready to use. -
Click a camera preview twice to set it to full screen.
Click twice again to close it. -
Click the right mouse button on the camera preview to open the context menu.
a. To turn off the device, open the context menu, press the Shutdown, then the Shutdown button.
After a moment, you can disconnect the power supply.
CONTEXT MENU
Camera pairing
This menu allows you to browse, pair and delete the cameras.
- To disconnect the camera from the NVR, press the Delete button.
- To pair a new camera to the NVR, press the Pair button. On the camera, press and hold the pairing button until the NVR displays the information about successful pairing.
Main menu
Check the “Main menu” paragraph for details.
Playback
- Select a day
- Select an hour
- Select a camera
- Playback control
- Timeline
Recording mode
In this menu, you can change the record mode at a set time. To do this:
-
Select a camera (or all of them).
-
Select the record mode:
a. Continuous recording (blue)
b. Recording after detecting a motion (green)
c. No recording (white) -
Click or drag across the grid, to set the record mode.
-
If you want to copy the recording schedule to another camera, select a camera, and press the Copy button.
Backup
In this menu, you can make a backup recordings to an external hard drive.
Connect the external hard drive to the USB port.
- Select a camera (or all of them).
- Select date and time. Press the Search button.
- The list of recordings will be shown. Select the recording that you want to backup and press the Backup button.
- Progress of the backup is shown on the bottom of the window.
IPC Config
- Color configuration
- Setting the camera name
- Codecs
- Advanced settings
- Updates
About
-
LOG- view the events log
-
Info- view the software info
Switching off -
Wyłączanie rejestratora
View 4/6/8/9 -
View the number of previews on one screen.
SYSTEM SETTINGS
General
- Date and time:
- Language
- Resolution
- Auto logout time (in minutes)
- Daylight saving time
- NTP protocol settings
- Synchronizing with IPC
- Guide during boot up
- Dual-stream
Display
- Changing the channel title
- Viewing info on preview
- Cycle through previews
a. Turning on the cycle
b. Cycle time (in seconds)
c. Cycle channels ◦For the cycle to work properly, assign a preview to every channel. If you want to display every preview one by one, assign one preview to every channel.
d. Adding, deleting, and modifying channels
e. Working after detecting the alarm
Network configuration
- Select the network card
- IP configuration
- Tuya settings
- Advanced
HDD management
- Connected disks list
- Formatting the hard drive
- Disk behavior when full
- Data limit (in days)
Accounts
-
Adding new user
• When adding a new user, set the name, password, and permissions. Adding accounts is only available when the admin account is active. -
Deleting and modifying users.
Alarm
- Select the camera to modify.
- Set the motion detection
- Set the motion detection range
- Delay
- Save channel/channel cycle
- Setting the alarm
- Set the behavior after a signal loss
Change the display mode
In this menu you can change the number of previews on one screen. Caution:
after each change of this setting, the system will restart and delete all of
the cameras.
Reset to Default
In this menu, you can select which one of the settings you want to reset to
default (or select all of them).
Software Update
- Select the update source, update file and press the Upgrade button.
- If the NVR is connected to the network, press the Check updates button.
APP PAIRING
Attention: pairing requires an account in the Tuya app.
- Press the Add device button.
- Select pairing with the QR code.
- In the DVR, open the Tuya settings menu. Scan the P2P QR code.
- After a moment, the NVR will be added to the app.
- To view the previews, select the NVR from the main screen of the app.
SPECIFICATION
- Recording after motion detection
- Scheduled recordings
- Motion and face detection
- Works with Tuya app
- Web-browser access
- Range up to 300 m (without any obstruction)
- Simultaneous preview from 4 cameras
- Wi-Fi Communication (2,4 GHz)
- Support for external hard drives
- Automatic pairing with cameras
NVR specification
- Operating system: Linux
- Video output: 1080p
- Communication protocols: TCP/IP, HTTP, DHCP, UDP, RTP, RTSP, FTP, NTP, P2P
- Maximum disk capacity: 4 TB
- Antennas: 2x 5 dB
- Ports: VGA, HDMI, RJ-45, 2x USB
- Power consumption: 3 W (without a hard drive)
- Power supply: 12 V / 2 A
- Working temperature: -10°C ~ 55°C
- Working humidity: 10% ~ 90%
- Dimensions: 258 x 230 x 41 mm
- Weight: 605 g
Camera specification
- Sensor: CMOS
- Lens: 3,6 mm
- Resolution: 2 Mpx (1080p)
- Framerate: 20 FPS
- Viewing angle: 75,7°
- Compression: H.265
- IR diodes range: 30 m
- Protection class: IP66
- Power supply: 12 V / 1 A
- Working temperature: -30°C ~ 50°C
- Working humidity: 0% ~ 90%
- Dimensions: 172 x 61 x 61 mm
- Weight: 313 g
- Inset: NVR unit, NVR power supply, camera (4 pcs.), camera power supply (4 pcs.), mouse
- OSD languages: Portuguese, Russian, Spanish, Italian, French, Czech, German, Finnish, Bulgarian, Swedish, Romanian, greek, Vietnamese, Turkish
Lechpol Electronics Leszek Sp.k. hereby declares that the Wi-Fi surveillance system KM2240 is consistent with directive 2014/53/UE.
The full text of the EU Declaration of Conformity is available at the following Internet address: www.lechpol.pl.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems) This marking shown on the product or its literature
indicates that it should not be disposed of with other household wastes at the
end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other
types of waste and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where
they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
Made in China for
LECHPOL ELECTRONICS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>