Zadro 10X1X LED Lighted Wall Mount Mirror Next Generation Instruction Manual

June 5, 2024
Zadro

Zadro 10X1X LED Lighted Wall Mount Mirror Next Generation

Zadro-10X1X-LED-Lighted-Wall-Mount-Mirror-Next-Generation-
PRODUCT

Important Safety Instructions

READ ALL INSTRUCTIONS BEFORE USE

FEATURES

The Next Generation® LED Lighted Wall Mount Mirror is designed for maximum illumination and performance. These innovative LEDs result in a better, brighter illumination that is glare and shadow free.

  • Cordless, Mount Where Needed
  • Dual Sided 1X and 10X Magnifying Mirror
  • LEDs Consumes up to 70% Less Energy than
  • Regular Bulbs
  •  ON/OFF switch
  •  Uses Four (4) C Batteries (Not Included)
  •  AC Adapter (Included)

INSTALLATION INSTRUCTIONS

  1.  Determine the position where you would like to place the mirror (for best results, locate a wall stud).
  2.  Unscrew mounting plate from the mirror to locate mounting holes and mark hole locations on the wall.
  3.  Use a ⅛” drill to make a 1” deep hole at the marks.
  4.  Install mounting bracket onto wall.
  5.  Install the mirror plate over the mounting bracket and secure with three screws.
  6.  Be sure the mirror is attached securely before using.

OPERATING INSTRUCTIONS

  1.  Your Next Generation® LED mirror will rotate 360° so that you can use either the normal 1X mirror or the 10X magnifying mirror located on the opposite side.
  2.  To turn lights on, simply turn the switch at the base of the mirror.
  3.  After use, always turn switch to the “OFF” position. Leaving the mirror on longer will reduce battery life.

CARE AND MAINTENANCE

  1.  Always unplug/turn off the mirror before cleaning.
  2.  Use only a soft damp cloth or non-abrasive cleaner to clean.

DANGER/WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:

  • Be sure the mirror is not in a position where it can reflect sunlight. Reflected light can cause fire.
  • Close supervision is necessary when this wall mount mirror is used by or near children or disabled persons.
  • Use this mirror only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
  •  Never operate this mirror if it has a damaged adapter cord, ifit is not working properly, if it has been dropped or damaged, or dropped into water. Return unit to manufacturer for examination and repair. Never drop or insert any object into any opening.
  • Keep the cord away from heated surfaces.

BATTERY REPLACEMENT

The battery compartment is located on the bottom side of the wall mount mirror. To replace the batteries, use these instructions:

  1.  Before attempting to replace batteries, turn wall mount mirror off and unplug adapter.
  2.  Remove wall mount mirror from mounting bracket by unscrewing the three screws on mirror plate.
  3.  Locate the battery compartment cover. The compartment holds four (4) C batteries. All four batteries must be properly positioned for the unit to operate.
  4.  Once the batteries have been inserted, replace the battery compartment cover.
  5.  Attach mirror to mounting bracket and secure with three screws.
  6.  The wall mount mirror is now ready for use.

AC ADAPTER

Use only an AC power adapter approved by Products, Inc.TM for use with this mirror. Use of any other adapter will void the warranty and can damage the mirror.

CARE/DISPOSAL OF BATTERIES

1. Use only fresh batteries of the required type and size.
2. Do not mix old and new batteries, different types of batteries, or rechargeable batteries of different capacities.
3. The batteries may explode if mistreated. Do not attempt to recharge or disassemble the batteries.
4. Depleted batteries are to be removed from the item.
5. Dispose of the old batteries properly, and according to your local regulations.
6. Ensure that batteries are kept out of reach of young children.

1 Year Limited Warranty

Products include a 1 Year limited warranty from date of purchase against defects in materials and workmanship. This warranty does not include damage to the product as a result of misuse or accident. Should your product become defective during the warranty period, Products, Inc.™ will repair or replace (at our sole discretion) your product, at no charge. However, you are responsible for properly packing your product and any applicable shipping charges to Products, Inc.™ Please contact our Customer Service. Please have available and/or include a copy of your receipt, model number and the issue you are experiencing with your product.
CUSTOMERS OUTSIDE THE UNITED STATES OF AMERICA, PLEASE CONTACT THE RETAILER OF PURCHASE DIRECTLY

TO RESOLVE ANY PRODUCT WARRANTY ISSUES.
Any product returned for preference is subject to a 20% restocking fee of the product and no shipping charges will be refunded. We shall not be liable for any incidental or consequential damages arising out of defects in this product, whether or not caused by its negligence. Some states do not allow the exclusion or limitation of incidental  or consequential damages or allow limitations on how long animplied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Zadro User Manuals

Related Manuals