TESY CN203ZF Electric Panel Heater Instruction Manual

: June 5, 2024
: TESY

Table of Contents

CN203ZF Electric Panel Heater
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CN203ZF Electric Panel Heater

ELECTRIC PANEL HEATER 2-5
Usage and Storage Instructions

CN203ZF 230V~ 50Hz 800/1200/2000W

This product is only suitable for well insulated spaces or occasional use.

IMPORTANT SAFETY MEASURES AND PRECAUTIONS:

dangerous. The manufacturer does not bear responsibility for malfunctions resulting from improper and irrational use. Non-adherence to these safety instructions will render the guarantee terms invalid!

WARNING!

Please read this manual before operating the appliance
and keep it at a safe place for future reference. In case
the appliance is obtained by a new owner, it should be
transferred together with its manual.
CAUTION: Children under 3 years of age should be
kept away from the appliance unless they are under
constant supervision.
Children from 3 to 8 years of age are allowed to
operate the on/off button ONLY, provided that the
appliance is installed and ready for operation and
such children have been supervised and instructed in
safe operation of the appliance and they understand
all related risks.
Children from 3 to 8 years of age MUST NOT: connect
the plug to power sockets, make adjustments, clean it
or carry out user maintenance operations.
This appliance can be used by children older than
8 years of age and by people with reduced physical,
sensor and mental capabilities, as well as by people
with insufficient experience and knowledge provided
they are supervised or instructed in safe operation
of the appliance and understand the related risks.
Children should not be allowed to play with the
appliance. Cleaning and user maintenance operations
must not be carried out by children without
supervision.
CAUTION: Some of the appliance parts may get very
hot during operation and thus cause burns to users. In
case there are children and vulnerable people in the
room, special attention should be paid.
WARNING: In order to avoid
overheating, do not cover the appliance!
The appliance should not be positioned close under
power sockets!
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Before operating the appliance – check if the
voltage indicated on the appliance technical
plate corresponds to the voltage of the electricity,
supplied to your place.
This appliance must be used only for the operations
it has been designed and intended for, i.e. heating
of domestic premises. This appliance is not intended
for commercial application. Every kind of different
application is considered improper and consequently
dangerous. The manufacturer does not bear
responsibility for malfunctions resulting from improper
and irrational use. Non-adherence to these safety
instructions will render the guarantee terms invalid!
DO NOT leave your place while the appliance is
operating: ensure that the power switch knob is
switched to OFF position. Always disconnect the
power plug from the socket.
Keep inflammable objects, such as furniture, pillows,
bedding, paper, clothes, curtains etc. at a distance of
at least 100 cm away from the panel heater.
Do not operate the appliance in areas of use or
storage of combustible substances. Do not operate
the appliance in areas of combustible media (for
example in close proximity to inflammable gases or
aerosols) – there is great risk of explosion and fire!
Do not insert and do not allow foreign objects to
enter the ventilation openings (inlet and outlet)
because this will cause electric shock, fire or will
damage the panel heater.
This appliance is not suitable for animal breeding
and it is intended for domestic use only!
Keep the air inlet and outlet clear of any objects:
unobstructed distance of at least 1 metre in front and
1 metre behind the panel heater should be provided.
The most common cause of overheating is fluff and
dust deposits in the appliance. Clean the ventilation
openings regularly with a vacuum cleaner. Before
that disconnect the power plug from the socket.
Never touch the appliance with damp or wet hands
– there is danger for your life!
The power socket must be easily accessible all the time
in case the power plug has to be disconnected as fast
as possible! Never pull the power cord or the appliance
itself in order to disconnect it from the mains.
ATTENTION! Outgoing air gets hot during operation
(up to more than 100°C).
Do not cover the appliance. If the appliance gets
covered, there is risk of overheating and fire.
If the appliance is damaged or does not work properly,
stop it and do not repair it yourself. For any kind of
repairs call for assistance the after-sale service centre.
This is the place where you will have your broken part
replaced with an original one. Non-adherence to this
instruction will compromise the appliance safety.
If you decide to stop using such kind of appliance,
it is advisable to render it unusable by cutting its
power cord after disconnecting it from the mains.
It is advisable all possible dangers related to the
appliance to be prevented, especially in relation to
children that may play with out-of-use appliances.
Never keep the appliance unnecessarily switched
on. Disconnect it from the power socket when you
do not intend to use it for a long period of time.
Warning: Do not use this appliance with a programming
device, counter or any other device which can
automatically switch it on because if the appliance is
covered or improperly positioned this may cause fire.
Position the power cord in such a way that it does not
obstruct the free movement of people and can not be
stepped on! Use only approved extension cords which are
suitable for this appliance, i.e. have got a conformity sign!
Never move the appliance by pulling its power cord
and do not use the power cord for carrying objects!
Do not bend the power cord and do not stretch it
over sharp edges, do not position it over hot plates
or open flames!
Never use this appliance in close proximity to wet
premises – bathroom, shower cabin or swimming pool!

PACKING

After unpacking the appliance, check if all its
elements are included in the packing and that it has
not been damaged during transportation! In case
damage or incomplete delivery is found, contact
your authorized retailer!
Do not throw away the original packing! It could
be used for storage and transportation purposes in
order to avoid damages during transportation!
Disposal of packing materials should be done in
the appropriate way! Children should be prevented
from playing with the polyethylene bags!
Thank you for choosing panel heaters – CN203ZF.
These are products providing heating in winter in the
power range of 800W, 1200W or 2000W depending
on the consumers’ needs for comfortable room
temperature. If operated and taken care of properly,
the appliance will provide you with many years of
useful operation.

INSTALLATION AND OPERATIONS INSTRUCTIONS

The appliance is intended only for on-floor
operation (horizontal flat surface)!
Before operating the panel heater you should install
its feet. The feet should be installed at the base of
the panel heater by means of 2 screws to each of
them. Make sure that the feet are properly aligned
at the two sides of the panel heater.
Take out the set of 2×2 screws and attach the feet by
screwing the screws with a proper extra tool (screwdriver),
which is not included in appliance set.
Set the panel heater in proper working position
before connecting it to the mains.
Select a proper place for the appliance, taking into
account the safety precautions.
During initial operation or when the appliance has
not been used for a long period of time, subtle
odour or smoke may be emitted, it will disappear in
a short period of time during appliance operation.
double power switch for selection of
power mode – „I” for 800W, ‘’II” for
1200W. The total maximum power
when both power switches are
turned-on is 2000W(800W+1200W)
The appliance is equipped with
thermo-regulator sensitive to
ambient temperature. You can turn
the thermo-regulator knob until the
desired room temperature is
achieved (the size of the heated
room has to conform to the power of the appliance; in
case the desired room temperature can not be achieved,
an additional panel heater needs to be operated). You
can turn the thermostat knob clockwise to maximum
power and when the desired room temperature is
achieved you have to turn it counter-clockwise slowly
until you hear a “ticking” sound. Then the appliance will
maintain the air temperature in the room at the
adjusted level by switching on and off automatically.
The appliance has got an in-built anti-frost function.In case you decide to use the appliance in a room,
where minimum temperature is to be maintained
(winter gardens, cellars or attics), the appliance has to
be adjusted to the desired heating level (level I, level
II or both), the thermostat knob has to be turned
counter -clockwise until it reaches the smallest
indicator circle . In this position the appliance will
maintain room temperature in the range of 5±2°С, i.e.
it will periodically switch on and off, maintaining the
adjusted level of temperature comfort in the room.
Panel heater CN203ZF is equipped
with an additional Turbo function,
which can be controlled by a
separate switch – Fan switch. Turbo
function assists panel heater in faster achievement of
desired room temperature. – turned-off, – turned-on
The available power levels are presented indicatively.
It is compulsory for the appliance to be secured
when positioned in a room without supervision. The
appliance electric installation has to be equipped with
an automatic safety fuse; with a distance between its
contacts in disconnected state of at least 3 mm.

Note: The device shows the temperature around the
location of the sensor and is not a means of accurately
measuring the ambient temperature.

MOVING THE APPLIANCE:

If the appliance has to be moved, switch it off by the
Heater switch. Take the power plug out of the power
socket and then, holding the appliance handles with
both hands, move it to its new position, having in mind
that the appliance must get cold (cooled down) before
doing this. Moving hot appliances may lead to undesired
consequences for the user like burns or inflammable
materials entering the panel heater during its movement.

CLEANING

It is compulsory first to switch off the appliance and
disconnect its power cord from the socket. Before
starting cleaning the panel heater you should wait until it
cools down after disconnecting it from the power socket.
Clean the body of the appliance with a damp cloth,
vacuum cleaner or soft brush.
Never immerse the appliance into water – there is
danger to your life from electric shock!
Never use petrol, thinner or coarse abrasive
products for cleaning because they will damage the
surface coating of the appliance.

STORAGE

Before putting away the panel heater let it cool
down after disconnecting it from the power socket.
Use the original packing for storing the panel heater
if it will not be used for a certain period of time. The
product can be protected from excessive dust and
dirt when it is kept in its original packing.
Never put a hot appliance into its packing!
The product has to be stored at a dry place away
from direct sunlight.
It is explicitly forbidden to store the appliance in
wet or damp premises.

PRODUCT PACKING SET INCLUDES:

Panel heater

|

1 pc.

---|---

Feet

|

2 pcs.

Feet fixing screws

|

4 pcs.

Manual

|

1 pc.

Guarantee certificate

|

1 pc.

TECHNICAL CHARACTERISTICS OF THE APPLIANCE:

Model

|

Rated power

|

Rated voltage

|

Rated frequency

---|---|---|---

CN203ZF

|

2000W

|

230V~

|

50Hz

Environment protection instructions Old electric appliances contain valuable materials and therefore should not be disposed of as domestic waste! We ask you for your active cooperation to protect the resources and the environment by submitting your appliance to organized buy-back stations (if there are such).

TABLE 2: INFORMATION REQUIREMENTS FOR ELECTRIC LOCAL SPACE HEATERS

Model identifier(s): 1.CN203ZF 2000W/230V~ 50Hz

Item	Symbol	Value 1.	Unit
Heat output

Nominal heat
output| Pnom| 2| kW
Minimum heat
output (indicative)| Pmin| 0.8| kW
Maximum
continuous heat
output (indicative)| Pmax,C| 2| kW
Auxiliary electricity
consumption| elmax| 1.974| kW
At nominal heat
output| | |
At minimum heat
output| elmin| 0.798| kW
In standby mode| el SB| 0| kW
Item| Unit
---|---

Type of heat input for electric storage local
space heaters only (select one)

|
Manual heat charge control, with integrated
thermostat| [yes/no]
Manual heat charge control, with room and/
or outdoor temperature feedback| [yes/no]
Electric heat charge control, with room
and/or outdoor temperature feedback heat
charge control, with integrated thermostat| [yes/no]
Fan assisted head output| [yes/no]
Type of heat output/room temperature
control (select one)| –
Two or more manual stages, no room
temperature control| [no]
With mechanic thermostat room
temperature control| [no]
With electronic room temperature control| [yes]
With electronic room temperature control
plus day timer| [no]
With electronic room temperature control
plus week timer| [no]
Other control options (multiple selections
possible)| [no]
Room temperature control, with presence
detection| [no]
Room temperature control, with open
window detection| [no]
With distance control option| [no]
With adaptive start control| [no]
With working time limitation| [no]
With black bulb sensor| [no]