LEVEL OC-PCD030-8A-T2 Portable EV Charger User Manual

OC-PCD030-8A-T2 Portable EV Charger
User Manual

Product Safety Information

Thank you for purchasing and using  Portable EV Charge Model 2
In order to help you properly use this product please read this user’s manual carefully before charging.
CAUTION

• Do not submerge the control box In water;
• Do not step on,pull,fold or knot the cable;
• Do not drop the control box or place heavy object on It;
• Do not place the charging cable near high temperature object when charging.
• Do not place the device in the car or In a sealed space when charging;
• Do not operate the device in temperatures beyond its operating range of -25°C to + 50°C.
• 16A Power-supply side input cable should be at least 3″2.5mm(recommended 34mm‘ ),with a standard 16A socket.32A Power-supply side in out cable should be at least 3’Amm (recommended 3’6mm‘ Jit is suggested that the power distribution Is operated by the professionals.

WARNING

• Only for using in the situation that the power-supply side contains RCD breaker protector.
• The device contains no maintainable parts.Do not attempt to repair or maintain it by yourself.
• Do not use the device when cable is broken.
• Only for EV charging.
• Do not use the device with an additional cable.
•  Do not put fingers into the charge connector.
•  Please contact the dealer for when the device can not work. , replacement When the device can not work.

Product Description

• Temperature Monitoring Monitor the working temperature of the charger in real time, if it exceeds the safe temperature, it will stop working immediately. After the temperature returns to normal, it can automatically resume charging.
• Automatically Repair Faults The smart chip can automatically repair common charging failures to ensure stable operation of the product.
• Certifications The product has passed the relevant certification to ensure that the product can be sold and used.
• Rugged Housing Made of PC material, the shell is firm and reliable, 1.5T car rolling test, no damage.

Product Features

Use Precautions

1. When using 16A mode, you must use a socket with a current no less than 16A.lf you use an ordinary 10A socket, please adjust the current below 10A.lf the charging device is damaged due to the wrong use of a socket with a rated current less than 16A,you will not enjoy the Guarantees service.
2.  Do not put inflammables, explosives or combustible materials, chemicals, combustible steam and other dangerous goods near the device.
3. Please keep the charging connector clean and dry lf it is dirty, please wipe it with a clean dry cloth. Do not touch the mental pin in the connector by hands.
4. Do not use the charging cable when it is defective, worn, cracked or exposed. If you find the above situation, please contact the customer service in time.
5. Do not attempt to disassemble, repair or refit the charging device. If you need to repair or refit, please contact the customer service. Incorrect operation may lead to equipment damage, water leakage, electric leakage, etc.
6. In case of any abnormality during use, all input power should be cut off immediately.
7. In case of rain and thunder, please charge carefully.
8. Children are not allowed to approach or use the device during charging to avoid injury.
9. It is strictly forbidden for any person to pull out the head of the charging connector without authorization during the charging process, so as to avoid the safety threat to the vehicle or personnel during the charging process.
10.  Vehicles are not allowed to drive during charging. Charging can only be carried out when the vehicle is stationary. For hybrid vehicles.

How to Start Charging

1. Insert the plug into power-supply socket firmly(Fig1).
   Ensure power-supply socket is compliance with /T\ national standard, and the rated current is 16A.

2. Press the button [A] to switch charging current mode. Press the button [CLOCK] to schedule time to charging ( fig.2)

3.  Pull cap lightly, completely, insert the vehicle connector into your vehicle’ s outlet(fig,3).
    Ensure the charging connector are fully inserted Z\ until it clicks.

4.  The device start charging.

How to Stop Charging

1. Press the button and disconnect the charging connector from the vehicle inlet(Fig.4).
2. Close protective cap of EV and put on the protective cap of charging connector(Fig.5)
3. Disconnect the plug from the power-supply socket (Fig.6)
4.  Put the charging cable into the bag.

• Some models will lock the charging connector when the power is on, and you need to power off before pulling out the charging connector.

Current Mode Switching

1. Please insert the power-supply plug into the power-supply socket firmly and disconnect the vehicle, then current mode can be switched by pressing the switch button[A].
2. The 16A device support four current switching mode of 8A, 10A,13A and 16A.
3. The 32A device support four current switching mode of 16A,20A,24A and 32A.
4. The 40A device support current switching mode of 16A, 20A,24A,32A and 40A.
   (Current switching numerical change in real time according to the latest national standards issued.).

Timing Charging Setting

1. Please insert the power-supply plug into the power-supply socket firmly and disconnect the vehicle, then timing charging can be set by pressing the switch button [clock];
2. The time increases by 1 hour when you press the button once, the maximum reservation time is 12h.

Introduction Of Screen Display

Quality Assurance

Portable Mode2 EV charger is warranted to be Tree of defects In material and workmanship for a period of one year trom the date of shioment.
This warranty does not cover any damage due to the following Cases:

1. Improper handling, installation, use and maintenance by users
2. The break down and the failure caused by the force majeure, such as direct damage and inability to function properly caused by natural disasters.
3. Products are soaked In water This warranty does not cover the cost of freight to return the device to manufacturer. This warranty Is only valid to the original purchaser of the device and Is not transferable.

Error Handling

2.Remove the EV charger connector and the power
plug ,Then try again after cooling, if there is still Error -A, contact the sales staff ;
Error -B| CP Short circuit| 1.Remove the EV charger connector and the power plug,Then plug in the power plug:
2.If Error-B does not appear in the LCD screen, CP short circuit exists at the end of the car;
3.If Error-B still appears on the LCD screen, please contact the sales staff
Error -C| Over-voltage Protection| 1.Check if the power supply voltage exceeds the protection voltage: GB/T and Type 2 does not more then 270V, Type 1 EV charger does not more then 28W;
2.If the voltage of the power supply terminal is too high, waiting until the voltage of the power becomes normal.
3.If the power supply terminal voltage is stable, but the EV Charger still displays Error -C, please contact the sales staff ;
Error -D| Under-voltage Protection| 1.Check if the power supply voltage exceeds the protection voltage ;GB/T and Type 2 can not less than 150V, Type 1 can not less than 80V
2.If the voltage of the power supply terminal is too low, wait until the voltage of the power supply becomes normal.
3.If the power supply terminal voltage is stable, but the EV Charger still displays Error -D, please contact the sales staff;
---|---|---
Error -E| Ground protection| Press and hold the ‘Delay” button for 5-10 seconds to charge normally ,
Error -F| Short circuit protection| 1.Remove the EV Charger connector and the power plug, Then plug in the power plug :
2.If the EV Charger can be used normally, there is a short circuit at the end of the car
3.If Error-F still appears on the LCD screen, please contact the sales staff ;
Error -G| Leakage Protection| 1.Remove the EV Charger connector and the power plug, Then plug in the power plug :
2.If the EV Charger can be used normally, there is a leakage short circuit at the end of the car;
3.If Error-G still appears on the LCD screen, please contact the sales staff ;
Error -H| others| Please contact the sales staff;

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>