GLEMM BS Series Speaker Pair Instruction Manual

: June 13, 2024
: GLEMM

Table of Contents

GLEMM BS Series Speaker Pair
CAUTIONS AND WARNINGS
Rear panel
Technical specifications
Set up and operation
WARRANTY CONDITIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GLEMM BS Series Speaker Pair

THANK YOU FOR YOUR PURCHASE
The product you have purchased is the result of careful planning by specialized engineers. High quality materials were used for its construction, to ensure its functioning over time.
The product is manufactured in compliance with the strict regulations imposed by the European Union, a guarantee of reliability and safety.
Please read this manual carefully before starting using the device in order to take advantage of its full potential.
Hoping that you will be satisfied of your purchase, we thank you again for your trust in our brand and we invite you to visit our website www.glemm.eu where you will find the whole range of our products, along with useful information and updates.

CAUTIONS AND WARNINGS

Read and follow strictly the instructions contained in this manual. Keep this instruction manual for future reference.
This product is not suitable for outdoor use. To avoid the risk of fire or shortcircuits don’t expose it to rain, humidity or high temperatures.
Do not allow water flammable liquids or objects to enter the product. Do not open, do not disassemble and don’t try to operate inside it.
The models BS 59BS/WA work with dangerous 230V mains power: in case of wrong use an electric shock may occur. Before you connect the speakers to an amplifier (for passive models) check that it is turned off and that the volumes are set on minimum.
The installation must be carried out exclusively by specialized technicians, skilled in electric and audio systems. In the event of a serious operating problem, stop using the product immediately.
Never try to repair it by yourself, but contact the authorized technical service center. To clean the product, use only a dry or slightly damp cloth, avoiding solvents or detergents of any kind. Keep away from children’s reach.

Rear panel

GLEMM-BS-Series-Speaker-Pair-fig-1

Morsetti – Terminals
Selettore lmpedenza/Tensione – Impedance/voltage selector
Morsetti diffusore Passivo – Passive speaker terminals
Regolatori Alti/Bassi e Volume – Treble/bass and volume controls
Tasto Accensione – ON/OFF button
Presa Alimentazione – Power socket
lngressi RCA – RCA inputs
Morsetti per diffusore Passivo – Terminals for passive speaker

Technical specifications

BS 54BT – BS 54WT| | BS 54W- BS 54B|
---|---|---|---
Imped.| B Ohm [32W max)| Imped.| B Ohm
voltage

Woofer

| 100V-2, 4, B, 16 W [RMS)| / Max power

Woofer

GLEMM-BS-Series-Speaker-Pair-fig-3 GLEMM-BS-
Series-Speaker-Pair-fig-4

Set up and operation

Choose carefully the area where to place the speakers, taking into consideration their operating range and the connection cables that will be used.
If you have purchased a pair of passive speakers [BS 54B/W. BS 63B or BS 67B], connect them to the amplifier using the red / black cables. Warning: when connecting the speakers to the amplifier, make sure that the power of the amplifier does not exceed that of the houses. Otherwise the speakers could be damaged. If you need to connect several pairs of speakers, pay attention to the impedance obtained from series connection, rather than from parallel connection. A different impedance changes the signal power and may not be supported by the amplifier. Check with a technician the correctness of your system. Once the connections are completed, turn on the amplifier and you will be ready to use your new audio system.
If you have purchased a pair of speakers with transformer [BS 54BT, BS 54WT or BS 67BT], you can select the 8 Ohm impedance on the back [and use them in the traditional way) or select a power related to the internal transformer [2W, 4W, SW , 16W] and connect them in parallel to 1 DOV constant voltage systems. The system can be enlarged or reduced simply by adding or removing speakers. In this type of connection, the transformer inside the speakers adapts the impedance of the speaker (8 Ohms) to the much higher impedance of the line itself. The diagram in the next page shows an example of 100V connection.

GLEMM-BS-Series-Speaker-Pair-fig-2

If you have purchased a pair of amplified speakers [BS 59BA or BS 59WA], you will not need to connect them to an amplifier, as it is already built-in in the speakers themselves. Connect the signal from an Mp3 player, CD or any other “line” signal source to the RCA sockets (7). The two speakers must be connected to each other through the included red / black cable, respecting the correct polarity. Connect the power cable to the rear socket (6) and thenplug it into a 230V power outlet. To switch on the internal amplifier, press the button (5). Use the controls (4) to adjust volume and bass & trebles to equalize the sound as you wish.
To prevent possible hearing damage, do not listen at high volume levels for long periods.

WARRANTY CONDITIONS

The product is covered by warranty according to current national and European regulations. For detailed warranty conditions and RMA requests please refer to our website: www.karmaitaliana.it or www.glemm.eu.
The warranty covers manufacturing defects and faults that occurred in the first 2 years from the date of purchase. In case of purchase with invoice, the warranty is limited to 1 year.
Damages caused by negligence or wrong use of the device are not covered by warranty.
The warranty is no longer effective if the item is modified or disassembled by not authorized people.
This warranty doesn’t necessarily envisage the product’s replacement.
External components, batteries, knobs, switches and any removable or subject to wear and tear parts are excluded from the warranty.
Shipment for the return of faulty items is at the expense and risk of the owner.
For all intents and purposes, the warranty is effective only upon exhibition of the invoice or of the purchase receipt.
If you send the product for repair, it must be shipped with complete original packaging: we therefore recommend saving it.
We also suggest registering your product on our website www.karmaitaliana.it, after signing in to access the private area. In this way you will have the possibility to keep track of the warranty validity and to receive updates on our items.
The manufacturer, in order to improve its products, reserves the right to modify their characteristics whether technical or aesthetic, at any time and without notice.
This symbol alerts you of the presence of important operating and maintenance instructions, in the manual or in the documentation accompanying the product.
This symbol alerts you to the presence of uninsulated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock. Do not open the product’s case.
The CE mark indicates that this product complies with the essential applicable European directives and their related standards. Compliance documentation in complete form can be asked to the company Karma ltaliana Sri.
Directive 201 2/19/UE regarding electric and electronic equipment waste [WEEE).
The symbol of the crossed-out dustbin indicates that the product at the end of its life must be collected separately from other waste. The user must, therefore, confer the fixture complete with all the essential components to an authorized disposal center for collection of electronic and electrical waste, or return it to the dealer when buying new equipment of equivalent type, at a rate of one-to-one, or one-to-zero if external dimension is less than 25cm. Appropriate separate collection to send the decommissioned equipment to recycling , treatment and environmentally compatible disposal helps to prevent negative impact on the environment and human health and promotes recycling of the materials making up the product. In Italy illegal dumping of the product by the user entails the application of administrative sanctions pursuant to Legislative Decree n. 49 (14/03/2014).