american lighting LA-3666E Five Color Adjustable Baffle Set Instruction Manual

June 17, 2024
American Lighting

american lighting LA-3666E Five Color Adjustable Baffle Set Instruction Manual
american lighting LA-3666E Five Color Adjustable Baffle
Set

WARNING! SHUT POWER O FF AT FUSE OR CIRCUIT BREAKER.

PREPARATION (Fig.1)

Installation Instruction

  1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.
  2. Carefully unpack your new fixture and lay out all the parts in a clean area. Take care not to misplace any small parts necessary for installation.

ASSEMBLING THE FIXTURE (Fig. 1& Fig. 2)

Installation Instruction

  1. Place metal cover (H) over all thread (G).
  2. Determine the desired hanging height and thread rods (F1, F2 and F3) to all thread (G) on fixture body. Attach canopy (D) by threading onto rod (F1). Carefully pass wires through each rod during assembly.
  3. Attach mounting plate (A) to junction box (Not included) with mounting screws (B) (Size: #8-32N*L0.5”). The side of mounting plate (A) marked “GND” with two convex points must face out.
  4. Connect Red wire (marked output +) (J) on driver (C) to Red wire (marked LED +) (K) on fixture. Connect Black wire (marked output ﹣) (L) on driver (C) to Black wire (marked LED -) (I) on fixture. Secure connections with small wire connector (M) and wrap connections with electrical tape for a more secure connection.

CONNECTING THE WIRES (Fig. 3)

Installation Instruction

  1. Connect electrical wires as shown in Fig 3, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect fixture’s ground wire to it. Otherwise, connect fixture’s ground wire directly to mounting plate (A) using green screw provided.
  2. Tuck wire connectors neatly into the junction box.

COMPLETING THE INSTALLATION (Fig. 1)

  1. Place canopy (D) over mounting plate (A) and secure with screws (E).
  2. Adjust ring (N) to desired position.

Your installation is now complete. Return power to the junction box and test the fixture.

Note: Illustration (Fig. 1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

Dimmable with ELV and/or LED compatible wall dimmer switches.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

American Lighting User Manuals

Related Manuals