Breo iScalp Scalp Massager User Manual

Breo iScalp Scalp Massager

Inside the Package

The package includes: 1 Main Unit, 1 Charging Base, 4 x Facial/Body Scrub Brush Heads, 1 USB Cable, 1 Power Adapter, 1 User Manual

Function Deployment

1. Main Button

2. Mode Indicator

3. Battery Level Indicator

4. Speed Indicator
   

5. Charging Base
   

Preparation

Preparation

1. Prior to use, check the condition of the machine and accessories.
2. No damage on power charger.
3. Fully charge the battery prior to initial use.

Charging

1. Place the device on the charging base, attach the USB cable to the power adapter, and plug into the power outlet.

2. While charging, the Battery Level Indicator on the main unit flashes, then stops flashing when fully charged.
   

3. The massager cannot be used while charging. If the unit is turned on while being charged, it will prompt the self-protection program and the massager will automatically turn off.

4. Charging time is 2-3 hours.
   IMPORTANT : USE ONLYTHE POWER ADAPTOR AND USB CABLE PROVIDED.

Operation

Power on
Press the power button. Battery, Mode and Speed indicator lights all turn green and the massager immediately starts. Default Mode – Mode1, slow speed.

Power off
Press and Hold the power button. All indicator lights turn off.

Manual Mode
Default Mode – clockwise massaging, slow speed
To change Mode, quick press the power button. The massage mode changes in this sequence:
Mode1 clockwise massaging, slow speed
Mode2 clockwise massaging, fast speed
Mode3 counterclockwise massaging, fast speed

Precautions

1. Please read the manual carefully and operate accordingly.

2. For safety and to prevent misuse, young children are not advised to use this massager.

3. This massager should not be used:
   a. On areas with infection/disease, or had recent surgery.
   b. On areas with burns or inflammation.
   c. By people with physical or mental disorder.

4. Do not use while walking or driving.

5. Keep the massager away from humidity, heat, and/or corrosive gas.

6. If the massager will not be used for a long time, remove the batteries to avoid battery leakage.

7. The massager heads are removable. To clean, detach the massager heads from the unit and wash with water. Wipe or air dry.

8. This product is not a substitute for healthcare professionals’ advice and treatment. In case of doubt or if necessary, please consult your healthcare professional.

9. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

10. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

11. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    – Reorient or relocate the receiving antenna.
    – Increase the separation between the equipment and receiver.
    – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    – Consult the dealer or an experienced radio/TV technician for help.

Troubleshooting and Technical Parameters

When operational problems occur, please refer to the chart below. Do not disassemble the machine or try to repair it yourself.

Problem

| Possible Reason|

Possible Solution

---|---|---

Power-on failure

| Lithium battery power is low|

Recharge the main unit at once

Weak massage

| Lithium battery power is low|

Recharge the main unit at once

Technical Parameters

Dimension: Main Unit:L3.54in x W3.54in x H4.72in
Charging Base: L3.94in x W3.94in x H2.24in
N.W.: 0.81b
Material: TPE
Power Supply: 5V=1A
Power: 5W

Note

WEEE Directive & Product Disposal
At the end of the serviceable l~e. this product should not be treated as household or ~ general waste. It should be handed over to the applicable collection point for the recycling – of electrical equipment or returned to the supplier for disposal.

Made in China
Manufactured by: Body Source Technology (Shenzhen) Co. LTD Company Address: Room 1902, 19F, Hisense Southern Building, No.1777, Chuangye Road, Yuehai Street, Nanshan District, Shenzhen 518054, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>