breo Scalp Mini Pro Head & Body Massager User Manual

breo Scalp Mini Pro Head & Body Massager User Manual

Precautions

Please read this User’s Manual carefully before using this device to ensure safe and proper use. The company shall not be responsible for any consequences caused by improper use or non-compliance with the relevant instructions of this device.

| Do not use this device while driving.
---|---
| When using this device, please remove any accessories or items around the area of your body that may affect massage.
| Please keep the device away from fire and corrosive environments.
| Please follow safety regulations when you use the device in specific environments.
| Do not use the device if you have previously received surgery to the massage area.
| Do not use the device if you have any discomfort such as skin injury, swelling, inflammation and bruising to the massage area.
| Do not use the device if you have heart disease or a history of heart disease, acute disease, skin disease, malignant tumor or any other abnormal physical symptoms.
Do not use the device if you have a blood disease or other bleeding tendency, osteoporosis, soft tissue disease or suffer strokes.
Do not use the device if you are slow in motion, have physical and mental discomfort or are mentally handicapped. Please follow your doctor’s advice if you need to use the device.
Please stop using the device if you experience any discomfort during use.
| Pregnant or menstruating women should not use the massager.
| Children under the age of 6 are forbidden to use the device, and children between 6 and 12 should use the device under the guidance and care of their parents or guardians.
| If you need to clean the surface of the main device, wash it with water and dry it with a soft cotton cloth. If you need to clean the surface of the support base, clean it with alcohol-soaked cotton instead of water.

| Do not use sharp objects to scratch or poke the device.
| This device is a household electronic health care device. It is not intended to be used as a medical device and is not suitable for diagnosis, treatment and other commercial purposes.
Please charge the device with the charging equipment provided by Brea, and pay attention to electrical safety.
| In the case of any abnormal occurrence when using the device, please cut off the power supply immediately. Do not disassemble the device and repair it by yourself.
Do not immerse the charging dock in water or other liquids, and do not wash it under the faucet.
The device has a heating surface. Those who are not sensitive to heat must be cautious when using the device.

Necessary knowledge

Usage Frequency

Please use the device as required. It is recommended to keep the usage time within 10 to 15 minutes, and wait for an appropriate amount of time before using the device again. Excessive use of the device may cause physical discomfort and skin injury.

Therefore, when using the device for the first time, please pay close attention to your physical condition and changes to your skin, and minimize your usage time.

Instructions On Use

When using this device, please adopt a comfortable position in which you can completely relax.
Please remove ornaments including headdresses and hairpins, headphones, earrings, glasses, etc. If you feel pain or discomfort to your skin, please stop using the device and see a doctor immediately.

Skin Conditions After Use

The skin on your head and the surrounding area of massage may turn red for a short period of time, but it will recover after a period of time.

* Miscellaneous

Product Diagram

Product Features

Component Name

Working Mode

When the device is off, short-press the ON/OFF button to turn on the device. The default mode after startup is Mode 1 (Fast Mode).

Power On

Short-press the ON/OFF button to start the device.

Mode Selection

After powering on the device, short-press the ON/OFF button to switch the mode.

Power Off

Long-press the ON/OFF button to turn off the device.

Charging Method 1

1. Place the device on the charging dock and make sure the connection fits.
2. Insert the micro USB connector of the USB cable into the micro USB socket of the charging dock.
3. Plug the other end of the USB cable into a rechargeable USB port or an adapter plugged into a socket to recharge the device.

Charging Method 2

1. Connect the magnetic head of the magnetic charging cable to the charging contact of the device.
2. Plug the other end of the magnetic charging cable into a rechargeable USB port or an adapter plugged into a socket to recharge the device.

When you charge the device, the indicator on the device panel will fiash. After charging is completed, the charging indicator will be solid.

It is normal for the host and power adapter to heat up slightly during charging.

Charging Time

1. The charging period is about 2-3 hours. The device cannot be charged when it is in use. If you attempt to charge the device while it is in use, it will enter self-protection mode and stop working automatically.
2. When fully charged, the device can be used 6 to 8 times for 15 minutes each time. (Usage time may vary according to the ambient temperature)
3. The indicator will flash when the battery power is low.

Correct Usage

The device cannot be used while charging. Before you use the device, please unplug the power adapter after charging is complete.

1. Timing
   The device can be set to work for 10 minutes at a time. after which the power supply will be automatically cut off.

2. Massage function
   When the device is off, short-press the ON/OFF button to turn on your device. The default mode after startup is Mode 1 (Fast Mode).

3. Massage modes
   Mode 1: Fast forward rotation, indicator light flashes once and stays on, far infrared is on;
   Mode2: Slow forward rotation, indicator light flashes twice and stays on, far infrared is on;
   Mode3: Fast and slow forward rotation, indicator light flashes three times and stays on, far infrared is on;

4. Low battery: Indicator light flashes;

Battery removal Step

Operation steps for battery removal

1. Cut off the external power supply, and remove the product housing;
2. Disconnect the power supply to the battery;
3. Remove the battery;
4. Place the waste battery at a fixed recycling station;
5. Please observe local environmental protection laws and waste disposal guidance and protect the environment.

Notes

• Remove the battery out of the appliance before scrapping the appliance;
• The appliance must be disconnected from power supply before removing the battery;
• The battery should be disposed of safely.

Except professionals. no one shall attempt to remove the battery!

Troubleshooting

Please perform the following checks in case of any failure occurring during operation. If the failure cannot be eliminated or the product still cannot work ideally, please cut off power supply and ask a professional technician to repair it. Never attempt to disassemble the product.

Symptom

| Possible cause| Basic solution
---|---|---
Power-on failure| Check whether the battery level is too low|

If yes, please charge the battery timely

Low massage intensity

|

Check whether the battery level is low

|

If yes, please charge the battery timely

If the problem still cannot be solved after troubleshooting, please call our After-sales Service at 400-830-9700.

Protection

Storage

When the storage period exceeds 3 months, unpack the product, and check and recharge it before use. Do not place the product tightly close to floor, wall and ceiling. The indoor environment should be well-ventilated; keep away from strong sunlight and corrosive gas.

Transport

The product package is provided with simple shockproof measures, therefore is suitable for transport by air, rail, road and sea. Keep away from rain and snow, and avoid inversion and collision.

Check of power supply

Check the power supply; do not power on the product if the supply voltage is beyond the specified range.

Maintenance

Take measures to resist moisture, rats and pollution. Cleaning should be carried out when the product is powered off.

After use, put the device in a safe place; do not place any heavy objects on the device. In case of any failure, please ask a professional technician to repair it. Do not attempt to disassemble the product.

Disposal and Recycle

The product should not be abandoned along with domestic wastes. Dispose of the product according to local environmental laws and guidelines.

CUSTOMER SUPPORT

Shenzhen Breo Technology Co., LTD
19/F, Hisense Southern Building, No.1777 Chuangye Road, Yuehai Street,
Nanshan District, Shenzhen 518054, China
support@breocare.com

References

• Breo Care | Simple relaxation anytime, anywhere – Breo SEA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>