breo Neck P4 Neck Massager User Manual
- June 17, 2024
- Breo
Table of Contents
- Suitable Users
- Product Configuration
- Instructions
- Operations
- Please wipe the product with a clean and soft cotton cloth. Do not use
- Do not use alcohol, paint thinner, gasoline or nail polish remover on the
- Troubleshooting
- Product Specifications
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
breo Neck P4 Neck Massager User Manual
Thank you for purchasing breo Neck Massager.
Please read the manual carefully before using the product,and keep it in a
safe place for future reference.
-
Precautions
During the use of this product, please always follow all the instructions and fundamental precautions, including: 1. Never leave the product unattended during use. Please unplug the power plug from the socket before installing or detaching the components when it is not used. -
To avoid overheat, potential fire, electric shock, or personal injury, don’t use the product with a blanket or pillow fully-covered.
-
Do not use the product when the air hole is blocked. Keep the outlet clean from lint, hairs, etc.
-
Do not drop or insert any objects into any ports.
-
Please keep the product away from water, fire, and corrosive environ ment.
-
Please turn off the device and unplug the power plug from the socket before disconnection.
-
Please don’t touch the power connection part or unplug the power plug with wet hands.
-
When children or the disabled use the product, close supervision shall be carried out to make sure that they use the product correctly. This device is not intended for use by children under the age of
-
Children aged bet ween 8 and 12 must be supervised while using the device.
-
Please keep the power cord away from heating appliances, so as to prevent leakage caused by the damaged power cord.
-
The appliance has a heated surface. Persons insensitive to heat must be careful when using the appliance. 11. Please use the product under the safe ultra-low voltage as required and marked.
-
The product can be used only with the power adaptor provided with the product.
-
The product is a household electronic health care product, but not a medical device, so it is not for diagnosis, treatment, and other commercial purposes.
-
Please keep an eye on the easily worn parts. In case of any damage, itis advised to immediately replace the defective parts and pause the use of the product before successfully replacing the components.
-
In case of damage and malfunction of the power plug, or that it falls off or drops into water, do not operate the product. Please return the device to the service center for inspection and repair.
-
Please do not use the product on swollen or bruised skin or parts with inflammation.
-
Please do not stand on the massager to avoid damage.
-
If the parts to be massaged show skin injury, redness, inflammation, and other symptoms, please do not use the product.
-
During use, please remove any accessories at the parts to be massaged o objects that may affect the massage.
-
Do not use the product when driving,
Users with the following conditions must consult doctor(s) before using the product, otherwise it may cause accidents and harm health.
- People affected by electromagnetic faults, such as pacemakers and other implantable electronic medical devices.
- People who are evaluated to have lost their sense of temperature.
- People with malignant tumors.
- People with heart diseases.
- People who are in the uneasy early stage of pregnancy or who just gave birth.
- People with an abnormal or curved spine.
- People with impaired perception because of serious peripheral circulato- ry disorders caused by diabetes.
- People with scars on their skin.
- People who need a quiet environment or with a poor health condition,
- People with osteoporosis, severe fractures, sprains, muscle pains, etc.
- People with acute inflammation, fatigue, chills, fluctuating blood pres- sure, and other symptoms of weakness.
- People with tendinitis.
- People who are receiving treatment from medical organizations.
Suitable Users
- People sitting in front of computers for a long time
- People who spend large amounts of time being sedentary
- People who often keep the same posture
- White-collars in modern cities
- People who often do manual labor
Product Configuration
- Massage Nodes
- Control Buttons
- Hand Straps
- DC Connector
- Power Adaptor
Instructions
- Power On/Off Button
- Mode Selection Button (Clockwise/Counterclockwise)
- Heat Control Button (On/Off)
- Speed Control Button
Operations
Instructions for Control Buttons
-
Power On/Off Button ;
Press this button to turn on the device. The default working time is 20 minutes. The massage will be stopped when the time is up and the whole device will be turned off. The kneading and heating functions are turned on by default when the device is turned on (the kneading direction will be automatically changed every minute), and the speed is set as the medium. Press this button when powered on, the whole device will be switched off and all massage actions will be stopped. -
Mode Selection Button
Press this button when powered on, and the kneading and massaging directions can be changed. The directions will change every time when pressing this button. -
Heat Control Button
When the power is on and the heating function is off, press this button to activate the heating function. When the heating function is already on, press
this button to turn off this function. -
Speed Control Button
When the power is on, press this button, the kneading speed will change from medium to fast; press the button for the second time, the kneading speed will change from fast to slow; press the button for the third time, the kneading speed will change from slow to medium. This cycle will be followed.
Notes:
- Please start with gentle massaging when you start to use the product
- Please stop use immediately in case of any abnormality on the body.
- Each usels recommended for no more than 30 minutes,
- The default setting of the product is 20 minutes of massage each time, The device will automatically turn off when the time is up. Please press the
Power On/Off Button to continue using.
Protection Tips for Maintenance
# Please make sure the power is switched off and the power unplugged
before cleaning the product.
Please wipe the product with a clean and soft cotton cloth. Do not use
corrosive detergents such as benzene or thinner to clean the product.
# Do not wipe the power control panel with a wet cloth to avoid device
failure. Please wipe it with a dry cloth.
# Do not immerse the product in water or other liquids. An accidental
spill
of water on the product may lead to electric shock.
Storage
# To keep the product clean, please make sure the product is kept away
from places of high humidity. You should store the product in the original
package and keep itin a clean and dry place.
# Do not put the products under direct sunlight or high temperature.
i 1f not used for a long time, please cover the product with a dust cover and
remove the power plug from the socket.
Please clean the device when dirty.
3 To clean the device body, please use the cloth dampened with soap water to
wipe off the dirt. Before wiping, please get rid of excess water in the cloth.
Do not use alcohol, paint thinner, gasoline or nail polish remover on the
product. Otherwise, the components may be cracked o the color may fade.
Troubleshooting
Problems | Possible Reasons | Solutions |
---|---|---|
The product is not working. | The power cord is not well connected. | Please |
connect the power cord safely..
The devices not turned| Please press the Power On/Off Button
The product automate- call enters sleep mode after 20-minute mas- sage| If you
would like another round of massage, please press the Power On/Off Button
again.
The product cannot beswitchedon,| You have already performed multiple rounds
of 20-min- ute massage.| Unplug the power cord and cool the device.
If the problem cannot be solved after troubleshooting,please send an email to service-global@breo.com. We are always happy to help.
Product Specifications
Product Name: breo Neck Massager
Model: breo Neck P4
Rated voltage: 12V ===
Rated power: 24W
Power Adaptor input: 100-240V~50/60Hz 0.8A
Power Adaptor output: 12V 2A
Product weight: 1.6kg
Product size: L540×W540×H150 (mm)
Shenzhen Breo Technology Co., LTD 19/F, Hisense Southern Building, No.1777 Chuangye Road, Nanshan District, Shenzhen 518054, China
Customer Service Support: service-global@breo.com
Website: www.breo.com Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>