logitech 960-001105 Brio Webcam with 4K Ultra HD Video and HDR User Guide
- June 5, 2024
- Logitech
Table of Contents
960-001105 Brio Webcam with 4K Ultra HD Video and HDR
User Guide
KNOW YOUR PRODUCT
| 
---|---
WHAT’S IN THE BOX
- Webcam with detachable universal mounting clip (on webcam)
- External privacy shutter
- Carrying case
- 7 2 ft (2 2 m) USB-A to USB-C cable (USB 2 0 or 3 0)
- User documentation
ATTACH THE PRIVACY SHUTTER
-
Attach the privacy shutter over the lens on the webcam as shown.
-
Snap it onto the front of the webcam, directly over the center
-
Manually adjust the privacy shutter to open or close as desired
SETTING UP THE WEBCAM
For placement on a monitor
-
Place your webcam on a computer, laptop or monitor at a position or angle you desire.
-
Adjust the webcam to make sure the foot on the universal mounting clip is flush with the back of your device.
-
Manually adjust the webcam up/down to the best position to frame yourself.
**For placement on a tripod***
-
Remove the detachable universal mounting clip from the webcam.
-
Locate the ¼ inch tripod thread on the bottom of the webcam.
-
Secure the webcam on your tripod by twisting it into the ¼ inch thread.
-
Place your webcam with the tripod anywhere you desire to the best position to frame yourself.
CONNECTING THE WEBCAM VIA USB-A
Plug the USB-C end into the webcam and the USB-A connector into the USB-A port
on your computer.
SUCCESSFUL CONNECTION
LED activity light will light up when the webcam is in use by an
application 
DIMENSIONS
WEBCAM:
Height x Width x Depth:
1 06 in (27 mm) x 4 02 in (102 mm) x 1 04 in (27 mm)
Cable Length: 7 2 ft (2 2 m)
Weight: 2 22 oz (63 g)
ATTACHABLE MOUNTING CLIP:
Height x Width x Depth: 0 7
5 in (19 mm) x 1 42 in (36 mm) x 2 48 in (63 mm)
Weight: 1 55 oz (44 g)
www.logitech.com/support/brio
© 2021 Logitech, Logi and the Logitech Logo are trademarks or registered
trademarks of Logitech Europe S A and/or its affiliates in the U S and other
countries Logitech assumes no responsibility for any errors that may appear
in this manual Information contained herein is subject to change without
notice