KLARSTEIN 10032435 Sky High Tower Fan Instruction Manual

10032435 Sky High Tower Fan
Instruction Manual
www.klarstein.com

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damage. We assume no liability for damage caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

https://use.berlin/10032436

TECHNICAL DATA

MANUFACTURER & IMPORTER (UK)

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK Limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom

SAFETY INSTRUCTIONS

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

• Before use, check that the voltage used is the same as the one identified on the unit.

• When the fan is not assembled, do not turn on the power, and turn off the power when moving the fan.

• Do not use wet hands to remove the power plug, to avoid the risk of electrification or electric shock.

• Do not insert your fingers or sharp objects into the guard when the fan is running.

• Use the fan away from high temperature, high humidity, acid and alkali oil,
  insecticide, curtains, and other articles that are easy to be sucked in.

• Babies and the elderly should not be directly under high wind for a long time.

• Do not place the fan on an uneven floor to prevent the fan from overturning.

• Before use, it is necessary to first check any damage to the power cord and the plug. If the power cord is damaged, in order to avoid danger, it must be replaced by professional workers from the manufacturer’s maintenance department or similar department.

• When leaving the machine or when the machine is not used for a long time, turn off the power and remove the power plug, so as to avoid the circuit failure.

• Do not place it in a place where curtains, etc. may be sucked in or covered.

• Do not cover any items when used.

• The fan is not intended for extended use by persons (including children) with reduced physical capabilities.

• During the transport, assembly, and storage, observe not to collide and squeeze the fan, especially the blade must be properly kept, resulting in no deformation, so as not to affect the performance of the fan.

• In case of any abnormal noise, smell, smoke, and other phenomena during the use, lose no time shutting off the power and send it to our after-sales service department for maintenance.

• Do not blow against the stove or gas.

• Before removing the protective housing, make sure that the fan is disconnected from the power supply.

Fan overheating protection
There is a thermal fuse installed in the fan motor, when the motor is overheated due to a variety of accidents, and the motor temperature reaches the level to activate the thermal fuse, the fuse will be blown out to cut off the power.

PRODUCT DESCRIPTION

1. Control Panel
2. Air outlet
3. Fan body
4. Base

ASSEMBLY

1. Remove the two parts of the base from the box, so that the holes of the two-part base are aligned and the two parts are formed into a complete base. (As shown in Fig. 1)
2. Run the power cord through the base, align the base with the holes on the fan body, then secure the power cord under the base clip to tighten the base with the fan body. (As shown in Fig. 2)
3. When the base is disassembled, screw out the screws first, then take the base out. (The method to disassemble the base is as shown in Fig. 3)

After the four posts are aligned and wrapped, firmly snap the base front inward (a sound can be heard), then use the same method to snap the base back.

After the base is put on the fan body, follow the schematic to secure the power cord under the base clip, then tighten the screws.
Hold the clip and forcibly pull the base out, after the clip comes out, use the same method to remove another clip.

USE AND OPERATION

Operate using a remote control (each button on the remote control is the same as that of an actual fan):
On/Off

• When this button is pushed, the fan will start at a low speed.
• By pressing this button again, the fan will stop working.

Timing Selection

When the fan is under working, if this button is pushed, it will enter timing status, and the setting at this time is 1 hour. The timing can be selected from 1h to 12h.
When the timer is set to 12h, if this button is pushed, the timing selection will be canceled. The timing hours change as per the way shown below:
1 hour > 2 hour > 3 hour > 4 hour > 5 hour > 6 hour > … > 12 hour > Timer canceled.

Selection of Wind

This button is to select the wind mode. When this button is repeatedly pushed, the wind mode will change from normal wind, natural wind, sleep wind, and normal wind in turns; the three different wind modes have the following features:

1. Normal wind: the normal wind mode is simply the Low, Medium & High fan speed speeds.
2. Natural wind: the natural wind mode automatically selects wind speed randomly as you would find outdoors. The natural wind also has low, medium, and high speeds.
3. Sleeping wind: the sleeping wind allows you to set a speed at low, medium, and high. The wind speed of these three sleeping wind modes changes as below:

• High sleeping wind: the air flows at high speed for half an hour, then drops to medium speed for half an hour, and finally drops to low speed.
• Medium sleeping wind: the airflow begins with medium speed for half an hour and finally drops to low speed.
• Low sleeping wind : the air flows at a low natural wind speed, till the present time is reached or the fan is turned off.

Wind speed
When this button is pushed, three different wind speeds of the low, medium, and high can be set.
Oscillation
When this button is pushed, the fan starts to oscillate with the wind, by pressing this button again, the fan stops oscillating with the wind.
Notes on Use

• The above operation can also be carried out on the control panel of the fan body, with the method same as the one described above.
• Only when “ON/OFF” is pushed, the fan can send wind.

USAGE OF THE REMOTE CONTROL

• When the remote control is used, make sure that the head of the front of the remote control is aligned with the receiving window on the fan body.
• The remote control can be about 5m from the front of the fan body; it can be normally operated if the deviation is within 30 degrees.
• Avoid direct sunlight on the receiving window, so as not to affect the effect of the receiver.
• If the remote control is not used for a long time, remove the battery and handle it properly.

When using the remote control, install the battery. The remote control operates on one lithium battery, with the insertion method as shown below:

1. Open the battery cover.
2. Insert a new battery, and pay attention to the polarity of the battery (+ and -).
3. Close the battery cover.

CARE AND CLEANING

• Before cleaning this product, make sure that the power is turned off first.
• Do not use water or other liquid to clean the electrical components (such as switching power supply, motor, etc.) and the electrical components can be wiped clean with a clean cloth.
• Do not use any grinding tools and solvents that can damage the surface to clean the product. You can wash the product with detergent and wipe dry with a clean cloth.
• Do not take the product apart for modification. It is recommended to inspect and clean the product annually as to extend its service life.

HINTS ON DISPOSAL

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.
This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences.

References

• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>