KLARSTEIN 10035086 Bormio Smart Fireplace Heater Instruction Manual

10035086 Bormio Smart Fireplace Heater
Instruction Manual

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damages. We assume no liability for damage  caused by disregard of the instructions and improper use. Scan the QR code to get access to the latest user manual and more product information.

https://use.berlin/10035086

TECHNICAL DATA

PRODUCT DATA SHEET

only
Nominal heat output| Pnom| 2.| kW| | manual heat charge control, with integrated thermostat| N/A
Minimum heat output (indicative)| Pmin| Q| kW| | manual heat charge control with room and/or outdoor temperature feedback| N/A
Maximum continuous heat output| Pmax,c| 2.| kW| | electronic heat charge control with room and/or outdoor temperature feedback| N/A
Auxiliary electricity consumption| | fan assisted heat output| N/A
At nominal heat output (fan motor)| elmax| N/A| kW| | Type of heat output/room temperature control
At minimum heat output (fan motor)| elmin| N/A| kW| | single stage heat output and no room temperature control| no
In standby mode| elSB| 0| W| | Two or more manual stages, no room temperature control| no
| | with mechanic thermostat room temperature control| no
| with electronic room temperature control| no
| electronic room temperature control plus day timer| no
| electronic room temperature control plus week timer| yes
| Other control options (multiple selections possible)**
| room temperature control, with presence detection| no
| room temperature control, with open window detection| no
| with distance control option| no
| with adaptive start control| yes
| with working time limitation| no
| with black bulb sensor| no
Contact details| Chal-Tec GmbH, WallstraBe 16, 10179, Berlin, Germany

SAFETY INSTRUCTIONS

• Read these operating instructions carefully before use and keep them for future reference.
• Install the electric fi replace in accordance with the provisions of this manual. If in doubt, consult customer service.
• Make sure the power outlet you want to use is easily accessible and not above the unit.
• Always turn the device off and unplug the power cord before moving, cleaning or servicing the unit.
• Fix the device securely so that it can not fall over.
• Do not leave the unit unattended when small children or elderly people are in the vicinity.
• Never leave children alone and unattended in the same room as the appliance when it is switched on.
• Do not cover the ventilation holes of the unit or block them. Never insert objects into the ventilation holes.
• Do not install the unit in rooms where running water is used, such as in bathrooms, kitchens, shower rooms, near swimming pools, etc.
• Never use sprays or steam cleaners to clean the unit.
• Never lay the device cable under carpets or in places where it may become a trip hazard.
• Do not install the device near curtains or other fl ammable materials.
• Do not use the device to dry clothing etc.
• Never sit or stand on the device.
• Never use the device in combination with timers or other devices that automatically turn on the device at a certain time.

Note: The device has overheating protection. If the device stops due to overheating, do the following: turn off the device and disconnect the power plug from the wall outlet. If  any objects are covering the device, remove them.

WARNING
Risk of burns! The device gets very hot, so do not touch it. Set all switches to “off” and allow it to cool completely. Once the unit has cooled down completely, you may reconnect the power plug to the power outlet.
Never open the product. It has no user serviceable parts.

CONTROL PANEL AND BUTTON FUNCTIONS

REMOTE CONTROL AND BUTTON FUNCTIONS

Note: The remote control requires 2 AAA batteries (not included with delivery). Open the battery compartment by sliding the cover down and insert the batteries into the  battery compartment according to the correct polarity.

GETTING STARTED

Insert the plug into the socket. Press the on / off switch on the lower right side of the device. If the device has been switched on, it can only be started via the remote control.
To do this, press the power button on the remote control.

Note: As soon as the device has been started via the remote control, it can be operated via the control panel on the bottom left of the device as well as via the remote control.

MANUAL OPERATION

Switch on the device via the main switch. The unit will beep once to indicate that it has been switched on. The device is now in standby mode. Once the device has been started  via the remote control, it can be operated via the control panel in the lower left corner of the device.

Adjust the heating power

• When you press the button for the first time, the unit will heat up with 1900 W of power. The heating power indicator will light up red.
• The second time you press the button, the unit will heat up to 950 W of power. The heating power indicator will light up blue.
• If you press the button a third time, the heating elements will be switched off and the heating power indicator will disappear.

Adjust the brightness

• When you press the button for the first time, the coal and the flames will be at the highest brightness level.
• If you press the button a second time, the coal and the flames will be at the middle brightness level.
• If you press the button a third time, the coal and the flames will be at the lowest brightness level.
• Pressing the button a fourth time will cause the coal and flames to go out.

OPERATION VIA REMOTE CONTROL

Note: When using the remote control, do not remove it more than 6 meters (19 feet) from the unit, making sure that the remote control is always oriented in the direction of the unit.

Start the device

When you press the power button on the remote control, the screen of the remote control will turn on, the flame will ignite, and the flame icon will appear on the LCD screen.
Week, time (24h system) and temperature display will be displayed normally. If you press the power button again, the LCD screen of the remote control will turn off.

Flame and coal control switch

• Pressing the button once when the unit is turned on will extinguish the flame and the coal bed, and the LCD screen will no longer display the icon.
• If you press this button again, the flame and the coal will start again and the screen will show the icon. When this button is pressed, the unit will beep once.

Adjust the flame brightness

Press this button to adjust the flame brightness. When this button is pressed, the unit will beep once.

Adjust the brightness of the coal bed

To adjust the brightness of the coal bed, press this button. The unit will beep once when this button is pressed.

Set the heating power

• When you press the button for the first time, the heating elements will operate at a power of 1900 W, the LCD screen will display and the heating power indicator lights up  red.
• When you press the button the second time, the heating elements will operate at a power of 950 W, the LCD screen will display and the heating power indicator will light up blue.
• If you press the button a third time, the heating elements will be switched off, the LCD screen no longer displays the icon and the heating power indicator will turn off. The unit will beep once when the button is pressed.

Note: If the heating elements are switched on with the remote control, whether they are activated or not will depend on the temperature setting and the room temperature. The  heating elements will only be activated if the temperature set by you on the device is above the room temperature.

Adjust the temperature setting

Press the arrow keys to adjust the temperature setting. You can set a temperature between 7 ° C and 30 ° C on the device. The device will beep once when one of the keys is  pressed.

Setting the current week and time >>

• If you press the button once, the corresponding symbol will light up on the LCD screen.
• Now press the arrow buttons to set the current time and the week. When this button is pressed, the unit will not beep.

Adjust the timer parameters

When you press the button for the first time, the LCD screen will display “1” which stands for Monday. The temperature setting will start to flash.

• Press the arrow keys to set the temperature for Monday. Press the >> button to confirm and press the arrow buttons to set the start time of the heating.
• The screen will now show [00-23]. Press >> to set the start of the heating.
• The [:] indication means that the timer function is currently activated and that the temperature measured by the unit corresponds to the temperature setting.
• The [.] Indication means that the timer function is currently activated and the  temperature measured by the unit corresponds to the temperature setting minus 3 °C.
• If the LCD screen does not show anything, this indicates that the timer function is disabled and the heating elements are not operating. The corresponding point will flash during the setting.

When you press the button a second time, the LCD screen displays „2“ for Tuesday.

Note: You may press this button up to seven times to set the temperature for the entire week. If you press the key an eighth time, you will exit the menu and the screen will show the setting for the current day of the week.

Activate the timer function

If you press the timer button, the timer function will be activated.

• When you press the button for the first time, the screen will display and the timer indicator will light up green on the device.
• If you press the button again, the icon will disappear from the screen and the timer indicator on the unit will turn off.
• After activating the timer function, this will be based on the respective temperature settings.
• The LCD screen will display these set parameters:

Note: If you want to change the time, week, and timer settings, you must turn the timer button on and off once to save the new data. When the device has received the new data, it will beep once.

Open window function

• If you press the button once, the screen will display the icon
• If you press the button again, the icon will disappear from the screen.
• When this button is pressed, the unit will beep once.

After the open window function is activated, the device first checks whether the heating elements are currently active. If the heating elements are active, the program will save the current room temperature values and measure the room temperature again every 12  minutes.

• If a temperature drop of more than 4 ° C is detected within 30 minutes, the program will automatically deactivate the heating elements as the device suspects an open window.
• After the heating has been stopped for 70 minutes, the program will start again to check whether the window has been closed.
• The unit now will now heat to 1900W for 6 minutes every 30 minutes. If the temperature rises more than 2 ° C during this period, the window will be assumed to be closed.

DEVICE CONTROL BY SMARTPHONE

If you integrate the device into your home WiFi, you can conveniently operate it via the associated Klarstein app. The app not only allows you to remotely control the device via your smartphone, but also gives you access to recipes and additional information.

Follow these steps to connect your smartphone to your Klarstein device:

1. Download the Klarstein app first by scanning the QR code with your smartphone (see below), or download it directly from App Store or Google Play.
2. Make sure your smartphone is connected to the same WiFi network that your Klarstein device is to be connected to.
3. Open the Klarstein app.
4. Sign in to your account. If you do not have an account, sign up in the Klarstein app.
5. Follow the instructions from the app.

App Download

Use the scan function of your smartphone to scan the QR code and save the app on your smartphone.

Note: The app provides further information on how to use the app and help on how to connect to your device as soon as you open it for the first time.

https://apps.apple.com/app/id1479571307#?platform=iphone

https://play.google.com/store/apps/details?id=com.chaltec.klarsteinrn&hl=en

Troubleshooting connection problems

If your Klarstein device cannot be found in the WLAN, check the following:

• Is the device plugged in?
• Is the WiFi feature of my phone enabled?
• Is the WiFi function of the Klarstein device activated? (Follow the instructions in the app)
• Has the WLAN password been entered correctly?
• Are the router, Klarstein device and smartphone in the immediate vicinity during the connection attempt? (Ideally no more than 5 m apart)
• If you have deactivated the 2.4 GHz band in the settings of your wireless router, activate it in your router settings.

Note: For further help, follow the instructions in the app when setting up the connection.

CLEANING AND CARE

Note: Turn off the unit and unplug it from the power outlet. Wait until the unit has completely cooled down before cleaning it.

• Use a vacuum cleaner to clean the ventilation slots and grilles.
• Remove dust on the outside surfaces with a damp (not wet) cloth.
• Do not use strong cleaning agents or abrasives.
• Do not spray the device with liquids or immerse it in water or other liquids.
• Never open the heater housing.

Storage
Keep the unit in a dust-free place during the low season. Pack it in the original carton.
Wind the heater cable cleanly to avoid damaging the cable.

DISPOSAL CONSIDERATIONS

If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance  with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of  this product, please contact your local authority or your household waste disposal service.

This product contains batteries. If there is a legal regulation for the disposal of batteries in your country, the batteries must not be disposed of with household waste. Find out  about local regulations for disposing of batteries. By disposing of them in accordance with the rules, you are protecting the environment and the health of your fellow human  beings from negative consequences.

DECLARATION OF CONFORMITY

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom

The complete declaration of conformity of the manufacturer can be found at the following link: use.berlin/10035086

References

• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>