KLARSTEIN 10034227 Ice Age Crush Ice Cube Maker Instruction Manual

EISZEIT CRUSH
10034227 10035509
www.klarstein.com

Dear Customer,
Congratulations on purchasing this device. Please read the following instructions carefully and follow them to prevent possible damage. We assume no liability for damage caused by disregard of the instructions and improper use.
Scan the QR code to get access to the latest user manual and more product information.

https://use.berlin/10034227

TECHNICAL DATA

SAFETY INSTRUCTIONS

• Check that the mains voltage corresponds to the rating of the appliance before operating.
• Use handles or knobs when moving. Place on a flat stable surface for use. Do not use outdoors.
• Do not use near or in the immediate vicinity of a bath or swimming pool or any source of liquid.
• Unplug from socket outlet when not in use.
• To protect against electric shock, do not immerse the cord or plug in water or any other liquid.
• The use of accessory attachments not recommended by the appliance manufacturer may cause
• Do not locate this appliance immediately below a socket outlet.
• Do not allow the cord to overhang the countertop where it can be easily pulled by children.
• Do not overfill as this may cause a hazard. Ensure the lid is closed when in
• To remove the plug from the outlet, do not pull on the supply Grasp the plug firmly and pull to remove it.
• Do not use this appliance for anything else other than its intended use. No liability can be accepted for any damage caused by non-compliance with these instructions or any other improper use or mishandling.
• This appliance is for household use only.
• This appliance is not intended to be operated by means of an external timer or separate remote control system.
• This appliance is not intended to be immersed in water.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent, or a similarly qualified person in order to avoid a hazard.
• Please according to local regulations regarding disposal of the appliance for its flammable blowing gas.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• Fill with potable water only.
• This device may be only used by children 8 years old or older and persons with limited physical, sensory, and mental capabilities and/or lack of experience and knowledge, provided that they have been instructed in the use of the device by a responsible person who understands the associated risks.

This appliance contains the coolant isobutane (R600a), a natural gas that is environmentally friendly. Although it is flammable, it does not damage the ozone layer and does not increase the greenhouse effect. The use of this coolant has, however, led to a slight increase in the noise level of the appliance.
In addition to the noise of the compressor, you might be able to hear the coolant flowing around the system. This is unavoidable and does not have any adverse effect on the performance of the appliance. Care must be taken during the transportation and setting up of the appliance so that no parts of the cooling system are damaged. Leaking coolant can damage the eyes.

WARNING
Danger from fire/flammable materials. Please observe the local regulations for the disposal of units with flammable refrigerants and gases.

• Keep ventilation openings in the unit housing free of obstacles.
• Do not damage the refrigerant circuit.
• Do not use any mechanical devices or other means to accelerate the defrosting process or the ice recovery process.
• Do not use other types of electrical appliances inside the ice cube machine.

Special Notes

• When positioning the unit, make sure that the power cord is not pinched or damaged.
• Make sure that there are no multiple sockets or power supplies on the back of the unit.

To avoid contamination of food, please follow the instructions below:

• Regularly clean surfaces that may come into contact with food. Clean the water drain regularly.
• If the appliance contains a water tank, clean it if it has not been used for 48 hours. Rinse the tank if no water has been removed for 5 days.

WARNING
When using, servicing, and disposing of the unit, pay attention to the left symbol on the rear of the unit or on the compressor. This symbol warns of possible fires. There are flammable substances in the refrigerant lines and in the compressor. Keep the appliance away from sources of fire during use, maintenance, and disposal.

PRODUCT OVERVIEW AND ACCESSORIES

1| Inspection windows| 7| Ice outlet
2| LCD screen| 8| Water tank door
3| Control panel| 9| Ice cube output button
4| Crushed ice & water outlet| 10| Nameplate
5| Crushed ice output button| 11| Water inlet hole
6| Drip tray| 12| Power cord

Supplied Accessories

CONTROL PANEL

Error condition. Switch off the device and unplug the main plug from the socket. Restart the device. If the symbol reappears, contact your service representative.
| Ice container full.
There is too little water in the water tank. Refill with water.
The appliance is in ice dispensing mode.
Water alarm. Water must be refilled.
Making ice cubes. If there is an S on the upper right side of the symbol, small ice cubes are produced. If there is an L on the upper right side, large ice cubes are produced.
Crushed ice is produced.

KEY FUNCTIONS

Key

|

Function

WATER| Press this button to obtain cold water. The ice function must first be activated.
SMALL/ LARGE| Press the small button to make small ice cubes and the large button to make large ice cubes.
ON/OFF| Press this button to turn the machine on or off.

INSTALLATION INSTRUCTIONS

• During transportation, the incline angle of the cabinet should not be over 45°. Do not turn the Ice maker upside down. As this may damage the compressor and sealed system.
• Remove all packing material and carefully check your ice maker to ensure it is in good condition and that there is no damage to the ice maker or power cord and plug.
• The Ice maker should be placed horizontally on a level surface. To ensure proper ventilation for your Ice maker allow 150 mm of space at the top, the back, and on each side. Do not install the Ice maker near an oven, radiator, or any other heat source.
• Before using the Icemaker for the first time, please wait 2 hours after positioning it, and keep the front lid open for at least 2 hours.
• Ensure that the voltage indicated on the ice maker corresponds with the voltage in your home.
• Pure water is not allowed to be used on this unit, spring water is recommended.
• Please always keep the viewing window close during ice making.

START AND OPERATION

Step 1
Plug the power plug of the appliance into the wall socket.
Step 2
Add water as shown in Figure A or Figure B.

Sketch A – Add Water by Manual| Sketch B – Connect Unit to Water Faucet
---|---
|
Open the water reservoir door, and fill directly, please be noted not over the MAX line.|

If the machine is in the ice cube making process and the refill water icon is displayed, but you want to make more ice cubes, first remove the ice and refill a cup of water to prevent the water tank from overflowing when the ice melts.

Step 3
Press the ON/OFF button to turn on/off the unit.
Step 4
The water is automatically returned to the water tank from the drip tray.
Step 5
Use the SMALL/LARGE buttons to select the desired ice cube size.
Note: If the temperature is less than 15 °C, SMALL size selection is recommended; if the temperature is more than 30°C, LARGE size selection is recommended.
Step 6
At the beginning of the ice cube-making cycle, the ice is frozen on the evaporator fingers.
Note: The duration of the ice cube production depends on the ambient temperature.
Step 7
Once the ice cube-making cycle is complete, the drip tray tilts forward. The remaining water is returned to the water tank and the ice cubes fall off the evaporator fingers.
Step 8
Within seconds, the drip tray tilts downwards and the ice produced in the previous cycle is pressed into the container. The machine repeats steps 4 – 6.
Step 9
Press the ice cube output button to obtain ice cubes. The corresponding icon will light up on the screen.
Note: Place your glass directly under the ice cube dispenser as it will fall out directly. If the ice cubes have been stored in the container for a long time, they may freeze and stick together, preventing the ice cubes from falling out. If this is the case, use the supplied ice bucket to separate the ice cubes before pressing the button.
Step 10
If you press the Crushed Ice output button, the device outputs Crushed Ice.
Step 11
Press the ON/OFF button to turn off the unit.

Step 12
Press the WATER button to obtain water.
Note: If you wish to receive cold water, at least the ice-making function should be activated. Be sure to place your glass under the water outlet before pressing the button, otherwise, the water will splash everywhere.
Step 13
If you want to remove or replace the filling water line or insert the drain block, proceed as follows:

First, remove the blue ring (A) and then press the white ring (B) on the outside.
Remove the filling water pipe last.

CLEANING AND CARE

• Clean the inside, ice collector, water container, ice shovel, and evaporator of the appliance regularly. To clean, first, unplug the appliance from the wall outlet and remove the ice cubes. Use a vinegar solution diluted with water to clean the inside and outside of the appliance. Do not spray chemicals or thinners, such as acids, gasoline, or oil, into the interior of the appliance. Rinse the unit with water before using it again.
• Make sure that the ventilation openings of the unit are not blocked. Do not use mechanical equipment or other means not recommended by the manufacturer to speed up the defrosting process.
• If the unit is not used again for a long time, the water pump may not be able to pump sufficient water due to air in the water supply line. If this is the case, the symbol for insufficient water is also displayed. To correct this, press the start button. The appliance will then function as usual.
• To ensure the purity of the ice cubes, the water should be changed every 24 hours.
• If the appliance does not work due to water shortage, too much ice, no electricity, etc., Turn the appliance off, wait for three minutes and then restart the appliance.
• Always use fresh water to make ice cubes. This applies to the initial installation as well as if you use the appliance again after a long time.
• This appliance is designed for household use only. The appliance is not designed for outdoor use. However, if it is to be used outdoors, make sure that the viewing window is closed.

TROUBLESHOOTING

Problem| Cause|

Possible solution

---|---|---

The compressor does not run as usual and makes a humming noise.

| The voltage is lower than recommended.| Switch off the device and restart it only when the voltage is normal.
The ice sticks together.| The ice cubes are too large.| It is recommended to select small ice cubes in winter and large ice cubes in summer.
The conditions for making ice cubes are good, but no ice cubes are made.| Coolant is leaking / the closed system is blocked.| Contact your service representative.
The error indicator lights up.| Ice cube blockade| Remove the ice under the ice container, and restart the appliance by pressing the on/off button.
The engine’s broken.| Contact customer service.
The viewing window is open when there is strong light.|

Keep the viewing window closed during ice cube making.

DISPOSAL CONSIDERATIONS

**** If there is a legal regulation for the disposal of electrical and electronic devices in your country, this symbol on the product or on the packaging indicates that this product must not be disposed of with household waste. Instead, it must be taken to a collection point for the recycling of electrical and electronic equipment. By disposing of it in accordance with the rules, you are protecting the environment and the health of your fellow human beings from negative consequences. For information about the recycling and disposal of this product, please contact your local authority or your household waste disposal service.

MANUFACTURER & IMPORTER (UK)

Manufacturer:
Chal-Tec GmbH, Wallstrasse 16, 10179 Berlin, Germany.
Importer for Great Britain:
Chal-Tec UK limited
Unit 6 Riverside Business Centre
Brighton Road
Shoreham-by-Sea
BN43 6RE
United Kingdom

References

• Klarstein | Your home. Your kitchen. Your style.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>