TOOA Gelato Maker User Manual
- June 15, 2024
- TOOA
Table of Contents
USER MANUAL
Important Safeguards
When using electrical appliances, basic safety precautions should always be
followed including the following:
a. Read all instructions.
b. To protect against risk of electrical shock do not put the machine in water
or other liquid.
c. This appliance is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or lack of experience and
knowledge, unless they are closely supervised and instructed concerning use of
the appliance by a person responsible for their safety. Close supervision is
necessary when any appliance is used by or near children. Children should be
supervised to ensure that they do not play with the appliance.
Exception: This appliance is not intended for use by children or by persons
with reduced physical, sensory, or mental capabilities, or lack of experience
and knowledge.
Close supervision is necessary when any appliance is used near children.
Children should be supervised to ensure that they do not play with the
appliance.
d. Turn the appliance OFF, then unplug from the outlet when not in use, before
assembling or disassembling parts and before cleaning. To unplug, grasp the
plug and pull from the outlet. Never pull from the power cord. Permanently
Installed – Make sure appliance is OFF when not in use, before putting on or
taking off parts, and before cleaning.
e. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner. Contact the
manufacturer at their customer service email address: support-us@tooa.com for
information on examination, repair, or adjustment.
f. The use of attachments not recommended or sold by the manufacturer may
cause fire, electric shock or injury.
g. Do not use outdoors.
h. Portable – Do not let cord hang over edge of table or counter.
i. SAVE THESE INSTRUCTIONS
| |
---|---|---
Do not lay the machine on one side or turn it upside down.| The machine is
climate class N and can operate up to 32°C room temperature.| Leave at least
20 cm of space around the machine for free air circulation and better
performance. Do not cover the ventilation grids.
Machine Overview
- Beaker
- Beaker lid
- Mixing paddles
- Motor Arm
- Start Button
- Slot
- ON/OFF switch
Before using the machine download TooA App by scanning the following QR code
Instructions
The contact between the beaker and the cavity is essential for a correct preparation
App Operating
The contact between the beaker and the cavity is essential for a correct preparation
Start button colours
The machine is ready to start the cycle.
There can be two possible cases:
White steady LED light | Green steady LED light | Blue steady LED light |
---|---|---|
Other statuses:
Blue flashing LED light| White flashing LED light| Blue steady LED light|
Magenta flashing LED light| White steady LED light for 13 secs
---|---|---|---|---
| | | |
Cleaning and maintenance
Before each cleaning operation, switch off the machine by switching the power
button to OFF at the back of the machine or by disconnecting the plug from the
power socket.
Before first use and after each preparation, wash the beaker and the mixing
paddles thoroughly using water and non-aggressive dishwashing detergents. You
can also wash them at low temperatures in the dishwasher.
Use a damp cloth for the external parts of the machine without ever laying it
on one side or turning it upside down.
Make sure not to scratch the surface of the beaker, as damage to the inner or
outer coating can impair its functionality.
Environment protection first!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a collection point.
Useful tips
The additional cooling cycle can be activated in two ways:
- Directly from the machine, pressing the start button.
- From the App, following the instructions on your smartphone. The machine will start automatically.
Please Note: the additional cooling time is only available once for each preparation cycle. Once the cycle is complete, the QR code on the brik will no longer enable the machine for another cycle.
End of preparation
As soon as the preparation cycle is complete, remove the beaker. Keeping the
beaker in its slot could cause the Gelato to melt quickly.
Brik QR code
Once the cycle is complete, the QR code on the brik will no longer enable the
machine for another cycle. Only in the event of a temporary power failure can
the QR code be reused.
Repeated preparations
At the end of a cycle the machine is immediately ready to prepare another
Gelato. However, we recommend a two-minute pause after 6 consecutive
preparations to restore the best operating conditions..
How to store briks
For an improved performance of the machine, it is advisable to refrigerate the
carton a few hours before use. In any case, the briks can be stored at room
temperature, in a cool, dry place and away from heat sources.
Contact us
If you experience any problems or have any questions, please get in touch at one of the following places:
| |
---|---|---
XXXXX XXXX| XXXXXX@tooa.com| TooA S.p.A.
XXXXXX
XXX XXXXXXX
XXXXXXX
www.tooa.com
tooa.com
MA-CO-1038-05
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>