AUTEL MaxiCheck MX808S-TS Diagnostic Scanner User Guide
- June 5, 2024
- AUTEL
Table of Contents
Quick Reference Guide
MaxiCheck MX808S-TS/MaxiCOM MK808S-TS/MaxiTPMS TS608S/MaxiDAS DS808S-
TS/MaxiPRO MP808S-TS/ MaxiPRO MK808BT Pro/MaxiDAS DS808S- T/MaxiPRO MP808BT
Pro
Thank you for purchasing this Autel tool. Our tools are manufactured to a high standard and when used according to these instructions and properly maintained will provide years of trouble-free performance.
Getting Started
IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully, paying extra attention to the safety warnings and precautions. Failure to use this product properly may cause damage and/or personal injury and will void the product warranty. Note: indoor use only
-
Press and hold the Lock/Power button to turn on the tablet.
-
Scan the QR code above to visit our website at pro.autel.com.
-
Create an Autel ID and register the product with its serial number and password.
-
Insert the MaxiVCI Mini into the vehicle’s DLC, which is generally located under the vehicle dashboard.
-
Pair the tablet with the VCI device via Bluetooth to establish a communication link.
-
When the VCI device is properly connected to the vehicle and the tablet, the VCI status button on the bottom bar of the screen will display a green badge at the corner indicating the tablet is ready to start vehicle diagnosis.
Please download the Maxi PC Suite software from www.autel.com > Support > Downloads > Autel Update Tools and install it on your computer.
Software Update
IMPORTANT: Make sure the tablet is connected to the Internet and has a sufficient battery or is connected to a power source.
- Tap the Update application button from the Diagnostics Job Menu and the Update screen will display.
- Check for all available updates: a) if you want to update all the items, tap the Update All button; b) if you want to update one or some of the items, tap the Update button on the right column of the specific item(s).
- Tap Pause to suspend the updating process. Tap Continue to resume.
- When the updating process is completed, the software will be installed automatically. The previous version will be replaced.
MaxiVCI Mini Firmware Update
- Connect the MaxiVCI Mini to a computer using a USB cable.
- Run the PC Suite software on the computer. This was installed along with the installation of the Maxi PC Suite software.
- Click the MaxiVCI Mini icon on the Device Selection window.
- The driver will automatically detect available update(s) for the device.
- Click Update to complete the operation if an update is available. Or
- Connect the MaxiVCI Mini to the tablet using a USB cable.
- Tap VCI Manager from the Diagnostics Job Menu, and then tap Update to complete the operation if an update for the MaxiVCI Mini is available.
Wireless Data Printing Print via PC
IMPORTANT: Make sure the tablet is connected to the same network as the computer, either via Wi-Fi or LAN, and that the computer is connected to a printer.
- Run the MaxiSys Printer on the computer. This was installed along with the installation of the Maxi PC Suite software.
- Click Test Print to make sure the printer is working properly.
- Tap Print on the toolbar of the tablet. A temporary document will be created and sent to the computer.
• If the Auto Print option in the MaxiSys Printer is selected, the MaxiSys Printer will print the received document automatically.
• If the Auto Print option is not selected, click Open PDF File to view all the temporary files. Select the file(s) you want to print and dick Print.
Print via APP
If a VVi-Fi printer is available, please purchase a Wi-Fi printer APP and
install it onto your tablet. To print a file, simply dick on the Print button
of a saved file on the tablet.
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement :
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
IC statement：
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.”
Email: sales＠autel.com
Web: www.autel.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>