AUTEL AUT62061339 Ultra Lite S Automotive Diagnostic Tablet User Guide

AUTEL AUT62061339 Ultra Lite S Automotive Diagnostic Tablet

QUICKSTART GUIDE
This quickstart guide applies to the MaxiSys® Ultra/Ultra EV/Ultra ADAS/MS919/MS909/MS909EV; MaxiCOM® Ultra Lite/Ultra Lite S. The VCMINCI icon will appear when the VCMINCI device is successfully connected. Ensure your Wi- Fi network is accessible and has a stable connection.

CONNECTING TO Wi-Fi

• Tap on the lower right hand corner of the screen
  • The Quick Settings menu will display.
• Tap No Internet Connection next to the Wi-Fi signal icon
  • A larger menu with additional options including Wi-Fi will display.
• Select Wi-Fi
• Make sure Wi-Fi is turned on
• Select your network
• Once connected, follow the instructions on the “Updating your MaxiSYS” document
  • The Wi-Fi icon will light ‘Mien connection is established.
  • From the Android screen, select Settings
• Make sure Wi-Fi is turned on
• Select your net-Nark
• Enter your network password to sign in
• Ensure you are connected to Wi-Fi: The Wi-Fi icon will display ,n the bottom right-hand comer

TOOL REGISTRATION VIA PC

• Visit : https://pro.autel.com .
• Click Register to create your Autel ID.
• If you already have an Autel ID, log in and skip to Step 5.
• Enter your personal information. Fields marked with an asterisk(*) are mandatory.
• Enter your email address, then click Request.
• You will receive an email from Autel with your verification code. Open the email and copy the cocle into the proper input box.
• Set a password for your account, and enter the password again to confirm.
• Read the Autel User SeNice Agreement and
• Autel Privacy Policy, then check the box to accept the terms.
• After all the information is entered, click Register.
• Once your account is successfully registered, you will be redirected to the Product Registration screen. If not, click the button on the screen.
• Your product serial number and password are required to complete your registration. To find your serial number and password on the tablet, go to Settings>About.
• Enter your tablet serial number and password.
• Enter the CAPTCHA code as shown.
• Click Subml to complete your product registration.

QUICKSTART GUIDE
This quickstart guide applies to the MaxiSys® Ultra/Ultra EV/Ultra ADAS/MS919/MS909/MS909EV; Maxi COM® Ultra Lite/Ultra Lite S.

TOOL REGISTRATION VIA TABLET

• A dialog box will display asking you to register your tablet.
• Tap Register
• Celle in Sure is an accessible email address
• On a computer or mobile device, check your email
• On the tablet registration screen, enter your email address, password and verification code
• The serial number and password fields will be automatically completed • Tap Register

DOWNLOAD SOFTWARE UPDATES

• Connect your tablet to Wi-Fi and plug it into a power source
• Select the MaxiSYS application or the MaxiSYS home icon at the bottom of the screen to open the main menu
• If updates are available, the number of available updates will display above the green Update button
• Select the Update button to view a list of available updates
• Download the system update by selecting the update button on the right
• Download update for each vehicle manufacturer you service • Select the i Information icon next to each update button to view update details

QUICKSTART GUIDE
This quickstart guide applies to the MaxiSys® Ultra/Ultra EV/Ultra ADAS/MS919/MS909/MS909EV; MaxiCOM® Ultra Lite/Ultra Lite S. The VCMINCI icon will appear when the VCMINCI device is successfully connected. Ensure your Wi- Fi network is accessible and has a stable connection.

PRINTING INSTALLATION & SETUP

• Make sure your Window PC and tablet are on the same Wi-Fi network
• On your computer. go to Autel.com, select Support> Downloads> Alltel Update Tools
• Locate the MaxiSYS PC Suite software and click on the Download Here button
• Open the zip file
• Select MaxiSYS Print, then click the setup.exe file to install the program
• Within the program dialogue box, check Auto Print to automatically use the default printer
• Select Quick Print to use the default printer or select Print to choose a printer

QUICKSTART GUIDE
This quickstart guide applies to the MaxiSys® Ultra/Ultra EV/Ultra ADAS/MS919/MS909/MS909EV; MaxiCOM® Ultra Lite/Ultra Lite S. The VCMINCI icon will appear when the VCMINCI device is successfully connected. Ensure your Wi- Fi network is accessible and has a stable connection.

VCMI CONNECTION VIA BLUETOOTH

• Select the VCMI Manager application from the Main Menu or from the bottom toolbar
• Your tablet will automatically start scanning for available VCMI devices. Found devices are listed on the right side of the screen.
• The paired device will display as “Connected”.
• When the VCMI device is ready to use, a green mark will display on the VCMI button at the bottom of the screen.

VCMI CONNECTION VIA WI-Fl

• Select the VCMI Manager application icon from the Main Menu or from the bottom toolbar
• Your tablet will automatically start scanning for available
• VCMI devices. Found devices are listed on the right side of the screen.
• When a connection is established, the connected device will display as “Connected”.
  • When the VCMI device is ready to use, a green mark will display at the VCMI button on the bottom of the screen.

VCMI SOFTWARE UPDATES

• Connect the VCMI device to the MaxiSYStlbletvia USB
  • Connect the VCMI to a power source to ensure updates are  instaffed correctly.
• Select the VCMI Manager application from the Main Menu
• Select Update from the Connection Mode list on the left side of the screen
  • The current and latest version af the VCMI software wi/1 display.
• If available, t,p the Updale Now button to download software

VID – VEHICLE IDENTIFICATION DETECTION I SCAN VIN

• Select Diagnostics from the Main Menu
• Select the blue VID button on the top left of the screen
• Select Scan VIN from the drop-down menu
• Position the camera so the VIN number (located on the vehicle dash or vehicle door jamb) displays within the scanning frame
  • The VIN is scanned and recognized automatically.
• The result displays in the Recognition result dialog box.
• Tap DK to confinm the VIN and continue

QUICKSTART GUIDE
This quickstart guide applies to the MaxiSys® Ultra/Ultra EV/Ultra ADAS/MS919/MS909/MS909EV; Maxi COM® Ultra Lite/Ultra Lite S.

VID – VEHICLE IDENTIFICATION DETECTION
AUTO VIN DETECT (COMPATIBLE W/VEHICLES 2007 AND NEWER)

• Select Diagnostics from the Main Menu
• Select the blue YID button on the top left of the screen
• Select Auto Detect from the drop-down menu
  • Once the vehicle is successfully identified, the diagnostic menu will display.

AUTO-SCAN

• Select Diagnostics from the Main Menu
• Select the vehicle manufacturer
• Select Automatic Selection to acquire VIN automatically. Tap Manual input to type in the VIN
  • All available systems will display.

QUICKSTART GUIDE
This quickstart guide applies to the MaxiSys® Ultra/Ultra EV/Ultra ADAS/MS919/MS909/MS909EV; Maxi COM® Ultra Lite/Ultra Lite S.

TOPOLOGY MODULE MAPPING

• Select Diagnostics from the Main Menu
  • A topology module map of all available systems will display after the Auto SCAN. All systems display in Dark Blue.
• Tap Fault scan at the bottom of the screen to scan system faults
  • A system found to have faults will display in Orange, with the number of faults detected displayed in the upper right corner of the system icon.
• No A system icon that displays as Green indicates the system is without fauf’ts; A Gray system icon indicates the system did not respond when scan was attempted.
• Tap List tab to view all available systems in list format
  • The third column displays Not Scanned indicating the system has not been scanned.
• Tap Fault scan at the bottom of the screen to scan system for faults
  • Data Trouble Codes (DTCs) can be viewed directly after scanning.
  • Fault I #, Indicates faults are present; “#” indicates the number of detected faults.
  • Pass I No Fault, Indicates the system was scanned and no fault was detected.
• No No Response: Indicates the system was unresponsive.
  • For vehicles that do not support Topology mapping, a System List will display after the Auto SCAN.
• Tap Fault scan at the bottom of the screen to scan system for faults
• DTCs can be viewed after scanning. Scroll to review systems

QUICKSTART GUIDE
This quickstart guide applies to the MaxiSys® Ultra/Ultra EV/Ultra ADAS/MS919/MS909/MS909EV; Maxi COM® Ultra Lite/Ultra Lite S.

PRE/POST SCAN REPORTS
Prior to Running Pre/Post Scans, it is recommended the following steps are taken to customized the reports.

• Select the Data Manager icon on the MaxiSYS home screen
• Tap the Workshop Information Icon
• Complete the fields on this screen by tapping on each field and inputting information. The information entered here will display on every Pre and Post Scan generated
• To Add logo: Tap the image icon and select from the drop-down menu to either take a photo with the tablet or to upload an image from the tablet
  • The generated Pre. and Post Scans are now complete with shop information and ready to be emailed to insurance company or printed for customer review.
  • Reports are stored in Vehicle History, accessible through Data Manager or through Diagnostics under the History tab
• Access stored report
• Select pencil icon and from drop-down menu, choose view, print, or email report

QUICKSTART GUIDE
This quickstart guide applies to the MaxiSys® Ultra/Ultra EV/Ultra ADAS/MS919/MS909/MS909EV; MaxiCOM® Ultra Lite/Ultra Lite S. The VCMINCI icon will appear when the VCMINCI device is successfully connected. Ensure your Wi- Fi network is accessible and has a stable connection.

MAXISYS MEASUREMENT APPS SUITE

OSCILLOSCOPE

MULTIMETER

WAVEFORM GENERATOR

OBDII CAN BUS CHECK

QUICKSTART GUIDE
This quickstart guide applies to the MaxiSys® Ultra/Ultra EV/Ultra ADAS/MS919/MS909/MS909EV;
MaxiCOM® Ultra Lite/Ultra Lite S. The VCMINCI icon will appear when the VCMINCI device is successfully connected. Ensure your Wi-Fi network is accessible and has a stable connection.

MAXISYS SYSTEM SUITE APPS

SERVICE

SERVICE
Designed to provide quick access to the vehicle systems for various service and maintenance tasks. Comprehensive service functions including Oil Reset, EPB, SAS, DPF, TPMS, and BMS.

DATA LOGGING

DATA LOGGING
Interactive recording sessions save vehicle testing data issues and enables direct contact with Autel’s technical support staff for first-hand troubleshooting of diagnostic bugs and errors.

REMOTE DESKTOP

REMOTE DESKTOP
Enables our tech support specialists upon your authorization to remotely log into the tablet and help you update software on tablet and VCMI, perform difficult diagnostic procedures or complicated vehicle services. This real- time support provides quick and accurate solutions.

DATA MANAGER

DATA MANAGER
Designed to store all data files, customer information and vehicle ID and vehicle diagnostic records.

ONLY REGISTERED AUTEL TOOLS CAN DOWNLOAD SOFTWARE UPDATES

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>