JAEGER-LECOULTRE 3288420 Reverso One Quartz Watch User Guide

JAEGER-LECOULTRE 3288420 Reverso One Quartz Watch

INTRODUCTION

We would like to thank you for the confidence you have placed in Jaeger- LeCoultre. Our Maison has applied all its expertise and exacting standards to the creation of this model.
We invite you to consult the operating in-structions and hope your Jaeger- LeCoultre timepiece brings you great joy.

REVERSO ONE

ACCURACY AND PRECAUTIONS FOR USE

QUARTZ MODELS
Quartz models are accurate to within 2 to 3 minutes a year. Jaeger-LeCoultre quartz watches contain a battery and electronic components.
When performing a maintenance service, your Jaeger-LeCoultre authorised Techni-cal Assistance Centre or your authorised Jaeger-LeCoultre retailer will recover such components and ensure they are disposed of in accordance with the standards in force.

WATER RESISTANCE

Your Jaeger-LeCoultre watch is water-resistant to 3 bar. Its water resistance can be identified by the symbol and/or the engraving: “3 bar” on the caseback. This means that your model has been tested at an overpressure of 3 bar, corresponding to an immersion pressure of 30 metres (1 bar = ±10 metres).
In accordance with the ISO 22810/NIHS 92-20 standard, in order to guarantee the durability of the watch’s characteristics over time, and as water resistance may be affected by certain activities, it is recommended that you:

• have the watch’s water resistance checked by an authorised Jaeger-LeCoultre retailer at least once every two years. It is essential to have such a check carried out each time your watch is opened, and before any period in which it is liable to undergo prolonged and/or regular immersions.
• check when making the purchase that the bracelet is suitable for the intended use.
• avoid subjecting the watch to excessively abrupt temperature changes.
• protect the watch from being dropped or suffering other accidental impacts, and have the water resistance checked after any severe impact.
• avoid using the controls, push-piece, or time-setting crown while under water, or outside the water, if the watch is not yet dry after immersion.
• restore the time-setting crown and the push-pieces to their normal positions, (or where applicable, close the compression keys) after every manipulation.
• rinse the watch with fresh water after use in seawater.

You may use your watch while swimming as long as you do not exceed the immersion pressure and do not engage in any water sports that could cause impacts. This watch is not a piece of diving equip-ment and should not be used as such. Also, note that leather straps are not suited for aquatic activities.

“1000 HOURS CONTROL” TEST
The Jaeger-LeCoultre Manufacture pays close attention to the quality and to the final checks of its watches.
The 1000 Hours Control is a series of internal qualification tests for each of the models in our collection, as well as internal tests on the production of your watch, which go beyond official timing tests. These tests include checks of the movement before and after being cased up in the watch and cover the whole watch once it has been assembled, in the condi-tions closest to daily wear.
The “1000 Hours Control” legend, or the “ ” seal engraved on the back of the watch certifies that each of the models from our collection has successfully undergone all of the qualification tests, and that your watch has successfully undergone all of the production tests. These ensure regularity of rate, resistance to variations in temperature and atmospheric pressure, ability to withstand shocks and magnetic fields, as well as water resistance.

CARE INSTRUCTIONS FOR LEATHER STRAPS

1. Keep the leather strap in a dry place
2. Avoid contact with water, cosmetics, perfumes, alcohol and oily materials
3. To prevent leather from discolouring, avoid wearing the watch:
   • in a highly humid environment
4. – during a sporting activity: sweat da-mages the leather
   • in prolonged exposure to sunlight
5. 4. Wipe with a dry and soft fabric. Do not dry in direct sunlight or near heat sources

TECHNICAL SPECIFICATIONS

• Quartz movement, Jaeger-LeCoultre Calibre 657.
• 32,768 Hz
• Battery reference: 364.

USE

SETTING THE HOURS AND MINUTES Pull the crown out to position 1.
Move the hands clockwise until the desired time is displayed. When the operation is complete, push the crown back to position 0.
ADJUSTING THE BRACELET OF THE REVERSO ONE CORDONNET
For optimal adjustment of your bracelet, we recommend that you contact your nearest Jaeger-LeCoultre boutique or authorised retailer, or contact one of our authorised Technical Assistance Centres.

If you choose to adjust the length of your watch’s bracelet yourself, a list of recommended tools can be found below:

• To open the clasp:
  A corrector tool (available from the Manufacture, can be ordered with reference number JLQE640895), or a stick with a plastic end to avoid scratching your piece during the operation.

• To cut the strands of the bracelet:
  A tool with a sharp blade. Ideally, we recommend using a cigar cutter (available in specialised boutiques. Not available from the Manufacture). This tool’s cigar-shaped blades keep the bracelet in place as it is cut.

OPENING THE CLASP

• With the corrector tool, place the extremity in the opening area.
• Pull up the clasp.
• Release the clasp.
• Remove the bracelet from the clasp.
  Be careful not to lose the ring linked to the bracelet.

ADJUSTING THE LENGTH OF THE BRACELET
Each strand of the bracelet is independent, they are joined symmetrically by the clasp. Make sure that each strand is cut to the same length.

• Determine the required length to know where to cut the bracelet.
• Cut the bracelet to the required length.

REASSEMBLING THE BRACELET AND CLASP

• Place as much of the bracelet as possible into the clasp.
• Close the clasp.
• Repeat the complete operation for the other length.

JAEGER-LECOULTRE WATCHES

In order to benefit from the International Guarantee and/or the Limited Warranty and/or the Manufacturer’s Guarantee for Australia, Jaeger-LeCoultre products must be purchased exclusively from authorised Jaeger-LeCoultre retail-ers or from Jaeger-LeCoultre Boutiques. Maintenance and repair work must be entrusted to an authorised Jaeger-LeCoultre retailer, a Jaeger- LeCoultre Boutique, or an authorised Jaeger-LeCoultre Service Centre. If these conditions are not met, the manufacturer’s guarantee does not apply. Please contact Jaeger-LeCoultre to obtain the list of authorised Jaeger- LeCoultre retailers across the world.

INTERNATIONAL GUARANTEE

The International Guarantee applies to Jaeger-LeCoultre products sold or presented for guarantee repairs in all countries, except the United States of America and Canada (for these two countries, see the Limited Warranty) and Australia (for this country, refer to the Guarantee for Australia).

TERMS AND CONDITIONS OF THE JAEGER-LECOULTRE INTERNATIONAL GUARANTEE
Your Jaeger-LeCoultre watch is guaranteed to protect against all manufacturing defects for two years from the date of purchase, subject to the following conditions. Any part found by our technical services to be defective as a result of a manufacturing defect will, at the sole discretion of Jaeger- LeCoultre, be repaired or replaced free of charge. The Jaeger-LeCoultre International Guarantee is valid only if the guarantee certificate enclosed with this booklet has been duly completed, dated, stamped, and signed by the authorised Jaeger-LeCoultre retailer or the Jaeger- LeCoultre Boutique, which sold you your watch.
The Jaeger-LeCoultre International Guarantee does not cover defects resulting from accidents, mishandling, or incorrect, abusive use (for example, knocks, dents, crushing, excessive temperatures, powerful magnetic fields), the use of or effect of using batteries other than those designated by Jaeger-LeCoultre, unauthorised alteration or repair, the consequences of normal wear and ageing of the watch, strap, or glass, the loss of water resistance after two years from the date of purchase, if your watch is water-resistant, or any defect resulting from contact with water, if your watch is not water-resistant. Jaeger-LeCoultre water-resistant watches can be identified by the symbol and/or by “3, 5, 10, or 20 bar” (or another number depending on the model) engraved on the caseback. Their water resistance is guaranteed for two years from the date of purchase, provided that the glass, bez-el, back, middle part, and crown have not been damaged. It is nevertheless essential to have the water resistance of your watch checked at least once every two years, and in any event, prior to any period of intensive use, either by an authorised Jaeger-LeCoultre retailer, a Jaeger- LeCoultre Boutique, or an authorised Jaeger-LeCoultre Service Centre (for further information please see your User Manual).
For quartz watches, this guarantee does not cover the battery life.
As a consumer, you may have legal rights under applicable national legislation governing the sale of consumer goods; those rights are not affected by this guarantee.

LIMITED WARRANTY (UNITED STATES OF AMERICA AND CANADA)

The following Limited Warranty applies to Jaeger-LeCoultre products sold or presented for warranty repairs in the United States of America and Canada only.

TERMS AND CONDITIONS OF THE JAEGER-LECOULTRE LIMITED WARRANTY
Your Jaeger-LeCoultre watch is guaranteed against all manufacturing defects for two years from the date of purchase, subject to the following conditions. Any part found by our technical services to be defective as a result of a manufacturing defect will, at the sole discretion of Jaeger- LeCoultre, be repaired or replaced free of charge. The Jaeger-LeCoultre Limited Warranty is valid only if the warranty certificate enclosed with this booklet has been duly completed, dated, stamped, and signed by the authorised Jaeger-LeCoultre retailer or the Jaeger-LeCoultre Boutique, which sold you your watch.
This Jaeger-LeCoultre Limited Warranty does not cover defects resulting from accidents, mishandling, or incorrect, abusive use (for example, knocks, dents, crushing, excessive temperatures, powerful magnetic fields), the use of or effect of using batteries other than those designated by Jaeger-LeCoultre, unauthorised alteration or repair, the consequences of normal wear and ageing of the watch, strap, or glass, the loss of water resistance after two years from the date of purchase, if your watch is water-resistant, or any defect resulting from contact with water, if your watch is not water-resistant.
Jaeger-LeCoultre water-resistant watch-es can be identified by the symbol and/or by “3, 5, 10, or 20 bar” (or another number depending on the model) en- graved on the case back. Their water resistance is guaranteed for two years from the date of purchase, provided that the glass, bezel, back, middle part, and crown have not been damaged. It is nevertheless essential to have the water-resistance of your watch checked at least once every two years, and in any event, prior to any period of intensive use, either by an authorised Jaeger-LeCoultre retailer, a Jaeger- LeCoultre Boutique, or an authorised Jaeger-LeCoultre Service Centre (for fur-ther information please see your User Manual).
For quartz watches, this guarantee does not cover the battery life.
Except insofar as prohibited by applicable law, this Limited Warranty shall be the exclusive manufacturer warranty. Neither this Limited Warranty nor any other warranties, whether expressed or implied, including, but not limited to, any implied warranty of merchantability or of fitness for any particular purpose, shall extend beyond the period of two years from the date of purchase.
The liability of Jaeger-LeCoultre is limited solely and exclusively to repair or replace-ment under the terms and conditions stated herein. Jaeger-LeCoultre shall not be liable, by virtue of this Limited Warranty or otherwise, for any loss or damage arising out of the use of or inability to use this watch nor for any incidental or consequential damages relating in any way to this watch.
Some States, Provinces, and Territories do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Limited Warranty grants you specific legal rights, in addition to which you may have other legal rights that vary from one Country, State, Province, or Territory to another.

GUARANTEE FOR AUSTRALIA

This Guarantee for Australia applies to Jaeger-LeCoultre products purchased or presented for guarantee repairs in Australia only.

TERMS AND CONDITIONS OF THE JAEGER-LECOULTRE GUARANTEE FOR AUSTRALIA
Mandatory Statutory Rights. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced, if goods fail to be of acceptable quality and the failure does not amount to a major failure.
This Jaeger-LeCoultre Guarantee gives you additional rights and remedies under the Australian Consumer Law and any other laws in relation to the goods. Every Jaeger-LeCoultre product is made and tested to meet the Jaeger-LeCoultre quality standards. Nevertheless, should your Jaeger-LeCoultre product prove defective, please contact the Jaeger- LeCoultre retailer or Jaeger-LeCoultre Boutique indicated on your guarantee certificate; only authorised Jaeger- LeCoultre retailers or Jaeger-LeCoultre Boutiques are entitled to provide a guarantee service as defined in this Jaeger- LeCoultre Guarantee. In order to benefit from this guarantee, you will be required to present this Jaeger- LeCoultre guarantee certificate duly completed, dated, stamped, and signed by an authorised Jaeger-LeCoultre retailer or a Jaeger- LeCoultre Boutique.
This Jaeger-LeCoultre Guarantee cov-ers defects of materials or workmanship of your Jaeger-LeCoultre product. Subject to your Mandatory Statutory Rights under the Australian Consumer Law, Jaeger-LeCoultre will remedy these identified defects free of charge for up to two (2) years from the date of purchase. Thereafter, Jaeger-LeCoultre will repair any defective product or part subject to a service charge. The Jaeger-LeCoultre Guarantee does not cover defects and damage caused by accident, improper use (including knocks, dents, crushing, etc.), normal wear and tear, alteration, dismantling, repair by persons other than authorised Jaeger-LeCoultre repair specialists, the use of components other than those recommended by Jaeger- LeCoultre, watches with the serial number removed, the strap or glass altered, the loss of water resistance after two years from the date of purchase, if your watch is water- resistant, and any defect resulting from the contact with water, if your watch is not water-resistant.
Jaeger-LeCoultre water-resistant watch-es can be identified by the symbol and/or by “3, 5, 10, or 20 bar” (or another number depending on the model) engraved on the caseback. Their water re-sistance is guaranteed for two years from the date of purchase, provided that the glass, bezel, back, middle part, and crown have not been damaged. It is essential to have the water-resistance checked by an authorised Jaeger-LeCoultre retailer, a Jaeger-LeCoultre Boutique, or an authorised Jaeger-LeCoultre Service Centre at least every two years, and in any event, prior to any period of intensive use. Please refer to the operating instructions for further details. For quartz watches, this guarantee does not cover the battery life. Subject to your Mandatory Statutory Rights under the Australian Consumer Law, if you make a claim under this Jaeger- LeCoultre Guarantee (instead of your Mandatory Statutory Rights) you may be responsible for transportation costs, in-cluding but not limited to postage, insurance and packing materials.

In Australia, a claim under the Jaeger- LeCoultre Guarantee may be sent to Richemont Australia Pty Ltd, provider of the guarantee service, at the address be-low or as specified above:
Richemont Australia Pty Ltd
PO Box 4780
Sydney, NSW 2001
Tel: +1 800 71 0665
Email: client.relations.asia@jaegerlecoultre.com

CUSTOMER SERVICE

A Jaeger-LeCoultre timepiece is a high-precision instrument that operates 24 hours a day, or 8,760 hours a year. There-fore, it is essential to have it serviced regularly in order to guarantee its good work-ing order and its durability. If significant variations occur in the settings, it may be necessary to have the movement serviced. It is also necessary to have the water-resistance of the watch checked once every two years, or prior to any period during which it will be subjected to prolonged and/or regular immersion.
Maintenance and repair work must be entrusted to an authorised Jaeger- LeCoultre retailer, a Jaeger-LeCoultre Boutique, or an authorised Jaeger- LeCoultre Service Centre. The list of our points of sale and service centres is available on our website: www.jaeger-lecoultre.com. You will also find this information at the end of this document, under the heading “Where to entrust my timepiece for maintenance?” Our authorised Service Centres are staffed by watchmakers trained at the Jaeger- LeCoultre Manufacture, and have the workshops, tools, and parts required for the repair and maintenance of Jaeger- LeCoultre watches and clocks.
In certain cases, especially for operations requiring special tools and parts, the Ser-vice Centres will send your watch to the Jaeger-LeCoultre Manufacture in Switzerland to have the necessary work carried out.

References

• Jaeger-LeCoultre Official Website | Swiss Luxury Watches Since 1833

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>