AUTEL MaxiCOM MK900-TS Automotive Diagnostic Scanner User Guide
- June 1, 2024
- AUTEL
Table of Contents
AUTEL MaxiCOM MK900-TS Automotive Diagnostic Scanner
Thank you for purchasing this Autel tool. Our tools are manufactured to a high standard and – when used according to these instructions and properly maintained – will provide years of trouble-free performance.
Getting Started
IMPORTANT:
Before operating or maintaining this unit, please read these instructions
carefully, paying extra attention to the safety warnings and precautions.
Failure to use this product properly may cause damage and/or personal injury
and will void the product warranty.
- Press and hold the Power/Lock button to turn on the tablet. Ensure the tablet has a charged battery or is connected to the power supply using the supplied power adapter and USB Type-C cable.
- Scan the QR code above to visit our website at pro.autel.com. Create an Autel ID and register the product with its serial number and password.
- Insert the MaxiVCI V150 into the vehicle’s DLC, which is generally located under the vehicle dashboard.
- Connect the tablet to the MaxiVCI V1 50 via Bluetooth to establish a communication link. When the MaxiVCI V150 is properly connected to the vehicle and the tablet, the VCI status button on the bottom bar of the screen will display a green badge at the corner, indicating the tablet is ready to start vehicle diagnosis.
Contact Information
- Email: sales@autel.com
- Web: www.autel.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>