HunterDouglas YORK-102 Single Rollers Shades Installation Guide
- June 1, 2024
- HunterDouglas
Table of Contents
HunterDouglas YORK-102 Single Rollers Shades
Product Information
- Specifications:
- Product: RB Basics Roller Shades
- Type: Manual Roller Shade – Single
- Mounting: Inside Mount (IB) or Outside Mount (OB)
- Mounting Surface Height Requirement: Minimum 1 1/4 inches
- Roll Tube Size: 1 1/8 to 2 1/2 inches
Product Usage Instructions
- Install the Brackets
- Ensure the mounting surface is level. Follow these steps for Inside Mount (IB) or Outside Mount (OB):
- Inside Mount (IB): Install each bracket with two screws either through the side or up through the top, ensuring they are leveled and aligned.
- Outside Mount (OB): Secure each bracket with two screws, making sure all brackets are level.
- Install the Shade
- Follow these steps to install the shade:
- Place the spring loaded pin end into the round hole of the bracket.
- Insert the hooks on the clutch straight into the two slots in the bracket.
- Gently pull downward on the side with hooks until they lock securely to the bracket. The bottom of the clutch should point straight down.
- Install the End Caps
- If using Open Roll Tubes measuring 1 1/8 to 2 1/2 inches, install the end caps accordingly.
- Removing the Shade
- To remove the shade, follow these steps:
- Raise the shade.
- Lift the control unit (hooks end) to disengage until the hooks touch the top part of the bracket slot.
- Slide the roll towards the spring loaded pin end until the hooks are completely out of the bracket slots.
- Remove the spring loaded pin end from the Idler bracket.
- Child Safety
- Ensure child safety by keeping cords out of children’s reach. Avoid cord loops and potential strangulation hazards by following safety precautions such as moving furniture away from cords and not tying cords together.
FAQs
- Q: Can I install the roller shades on uneven surfaces?
- A: It is recommended to install the roller shades on a level mounting surface for proper operation. If necessary, use shims to level the brackets.
- Q: What should I do if the shade does not lock securely to the bracket?
- A: Ensure that the hooks on the clutch are inserted straight into the slots on the bracket and gently pull downward until they lock securely. Adjust as needed to achieve a secure fit.
INSTALLATION
Install the Brackets
- Inside Mount (IB), Install each bracket with two screws either through the side or up through the top. Make sure all brackets are leveled and aligned.
- Outside Mount (OB), Secure each bracket with two screws. Make sure all brackets are level. Minimum 1 1/4” mounting surface height requirement.
Install the Shade
First, place the spring loaded pin end into the round hole of the bracket. Then, keeping the pin end secure in its bracket, insert the hooks on the clutch straight into the two slots in the bracket. Once the two hooks are through the slots, gently pull downward on the side with the hooks until the hooks have locked securely to the bracket. The bottom of the clutch should point straight down.
Install the End Caps (Open Roll Tubes 1 1/8″ to 2 1/2″‘)
Removing the Shade
First, raise the shade. Gently lift up the control unit (hooks end) to disengage, until the hooks touch the top part of the bracket slot. Then, slide the roll towards the spring loaded pin end until the hooks are completely out of the bracket slots. Lastly, remove the spring loaded pin end from the Idler bracket.
Child Safety
Young children can STRANGLE in cord loops and the loop above the cord stops. They can also wrap cords around their necks and STRANGLE.
- Always keep cords out of children’s reach.
- Move cribs, playpens, and other furniture away from cords.
- Children can climb furniture to get to cords.
- Do not tie cords together.
- Make sure cords do not twist together and create a loop.
WARNING
- Window Blind Cord Strangulation Risk
- Window blinds with a damaged or loose tension device or retractable cord that fails to fully retract pose a strangulation risk to children. To avoid this potential strangulation risk, consider purchasing cordless products or products with inaccessible cords.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>