logitech H600 USB Wireless Headset with Noise Cancelling Mic User Guide

logitech H600 USB Wireless Headset with Noise Cancelling Mic User Guide

What is in the Box

Headset features

1. Noise-canceling microphone
2. Flexible, rotating microphone boom
3. Adjustable headband
4. Charging port
5. Status light
6. Nano receiver storage
7. Volume up
8. Volume down
9. Power switch
10. Microphone mute
11. USB wireless Nano receiver
12. USB charging cable

Getting started

Try the headset

Listen to music or make an Internet call to test the wireless connection between the headset and your audio source (laptop or smartphone). If the headset doesn’t work with your computer, you may need to make an adjustment in your computer’s operation system so it will recognize the headset, making the headset the default audio input/output device.
Also refer to Help with setup for additional troubleshooting advice.

Windows® XP

1. Go to Start/Control Panel/Sounds and Audio devices/Audio tab.
2. In the Sound Playback/Default Device window, choose the Logitech Wireless Headset H600.
3. Select the Voice tab.
4. In the Voice tab, choose the Logitech Wireless Headset H600.
5. Click OK.
6. Restart your media application

Windows® Vista and Windows® 7

1. Go to Start/Control Panel/Sounds/ Playback Devices tab.
2. Choose Playback Devices.
3. Choose the Logitech Wireless Headset H600.
4. Click Set Default, and then click OK.
5. Select the Recording Tab.
6. Choose the Logitech Wireless Headset H600.
7. Click Set Default, and then click OK.
8. Restart your media application.

Mac® OS

1. Open System Preferences.
2. Choose the Sound/Output tab.
3. Choose the Logitech Wireless Headset H600.
4. Select the Input tab.
5. Choose the Logitech Wireless Headset H600.
6. Close window.
7. Restart your media application.

Status light indicators

Color/behavior

|

Meaning

---|---
Green| More than 30 minutes of battery life left
Red (+ beeping)| Less than 30 minutes of battery life left
Orange| Charging
Steady| Wireless connected and ready to use
Blinking| Wireless not connected
Pulsing| Headset is off and charging
Off| Headset is off

Note: To charge the headset, plug the included USB charging cable into your headset and computer. When the headset battery is very low, a full charge can take up to three hours. But you don’t have to stop using the headset because it charges while  you talk or listen to music.

Important: At product end of life, the battery is removable for disposal/recycling ONLY. Please see www.logitech.com/support for more information.

Help with setup

Something not sound right? No sound at all? Not connecting?

• Try moving the headset closer to the USB wireless Nano receiver. The wireless connection status light on the headset turns solid green when the headset is in range (up to 30ft/10m) with the Nano receiver. See the wireless performance table below for Nano receiver placement tips.
• Make sure the headset is the active output audio device in both your application and operating system. For more information, see Test the Headset.
• Adjust the volume and microphone settings to an audible level in both your application and operating system.
• Quit and restart your media application.
• If you’re using a USB hub (powered or un-powered), try plugging the Nano receiver directly into your computer.
• Try using the headset with another computer.

Headset not charging?

• Use the provided USB charging cable. Connect the cable to the charging port on the headset, and connect the other end of the cable to a USB port on your computer.
• If you are using a USB hub, connect the charging cable directly to a USB port on your computer.

Controls not working?

• Some functions of the headset may not be supported depending on the tablet, smartphone and/ or application.

Wireless performance

wireless router

For additional assistance, please visit www.logitech.com/support.

Support

www.logitech.com/support

• België/Belgique
  • Dutch: +32-(0)2 200 64 44;
  • French: +32-(0)2 200 64 40
• Česká Republika +420 239 000 335
• Danmark +45-38 32 31 20
• Deutschland +49-(0)69-51 709 427
• España +34-91-275 45 88
• France +33-(0)1-57 32 32 71
• Ireland +353-(0)1 524 50 80
• Italia +39-02-91 48 30 31
• Magyarország +36 (1) 777-4853
• Nederland +31-(0)-20-200 84 33
• Norge +47-(0)24 159 579
• Österreich +43-(0)1 206 091 026
• Polska 00800 441 17 19
• Portugal +351-21-415 90 16
• Россия +7(495) 641 34 60
• Schweiz/Suisse Svizzera
  • D +41-(0)22 761 40 12
  • F +41-(0)22 761 40 16
  • I +41-(0)22 761 40 20
  • E +41-(0)22 761 40 25
• South Africa 0800 981 089
• Suomi +358-(0)9 725 191 08
• Sverige +46-(0)8-501 632 83
• Türkiye 00800 44 882 5862
• United Arab Emirates 8000 441-4294
• United Kingdom +44-(0)203-024-81 59
• European,  Mid. East., & African Hq. Morges, Switzerland
  • English: +41-(0)22 761 40 25
  • Fax: +41-(0)21 863 54 02
• Eastern Europe English: 41-(0)22 761 40 25
• United States +1 646-454-3200
• Argentina +0800 555 3284
• Brasil +0800 891 4173
• Canada +1-866-934-5644
• Chile +1230 020 5484
• Latin America +1 800-578-9619
• Mexico +001 800 578 9619

www.logitech.com

USB Wireless Nano Receiver Regulatory Information

Model# A-00032
IC: 1807D-A00032
Made in China
Fabrique in chine

© 2011 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. Microsoft, Windows, Windows Media Player, and the Windows logo are trademarks of the Microsoft group of companies. Mac, the Mac logo, and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. All other trademarks are the property of their respective owners.
Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.
620-003302.003

References

• Logitech | Official Online Store
• Logitech Customer Support & Business Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>