CROSSIO CFL-1127-01 Ceiling Fans with Lights User Manual
- June 15, 2024
- CROSSIO
Table of Contents
- Packing List
- Installation kit
- Safety Rules
- Installation Preparation
- Installation Step 1 (Mount the Bracket)
- Installation Step 2 (Connect the Wires)
- Installation Step 3 (Fix the Canopy)
- Installation Step 4 (Install the Remote Holder)
- Remote Control Instructions
- APP Control Instructions
- Trouble Shooting
- Contact Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CROSSIO CFL-1127-01 Ceiling Fans with Lights
Packing List
Part | Description | Quantity |
---|---|---|
A | Bracket | 1 |
B | Canopy | 1 |
C | Fan Assembly | 1 |
Part | Description | Quantity |
--- | --- | --- |
D | Remote Control | 1 |
E | Remote Holder | 1 |
Installation kit
Part | Description | Quantity |
---|---|---|
AA | Canopy Screw (assembled) |
| 4
BB| Wire nut
| 3
CC| Pair of Gloves
| 1
DD| “S” Hook
| 1
EE| Wood Screw (optional)
| 4
FF| Machine Screw & Washer for Outlet Box (spares)
| 2
| |
Note:
Some extra hardware may be included. The quantity listed above is the number
required for installation.
Safety Rules
-
Be sure the power to the wires you are working on is disconnected, either the fuse is removed or the circuit breaker is turned off. Turning the power off using the light switch is not sufficient to prevent electrical shock.
-
A qualified licensed electrician is required for the installation.
-
The outlet box and support structure must be securely mounted and capable of reliably /supporting a minimum of 50 pounds. Use only UL (cUL for Canadian Installation) listed mounting boxes marked “FOR FAN SUPPORT”.
-
The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.
-
Do not operate reversing switch while fan blades are in motion (if applicable).
The fan must be turned off and the blades stopped before reversing the blade direction. -
Do not place any objects in the path of the blades.
-
To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
-
Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened soft cloth will be suitable for the cleaning.
-
After marking electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor on one side of the outlet box.
-
Electrical diagrams are reference only, different fan lights may have different light shades and bulbs.
-
Use only our replacement parts. This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.
Warning:
To reduce the risk of personal injury, use only the two steel screws and
washers provided with the outlet box for mounting to the outlet box. Most
outlet boxes commonly used for the support of lighting fixtures are not
acceptable for fan support and need to be replaced, consult a qualified
electrician if in doubt.
To reduce the risk of fire, electric shock, or personal injury, mount the fan to the outlet box marked “acceptable for fan support”.
To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades.
Installation Preparation
Tools You Need
-
Ladder
-
Pliers
-
Wire Strippers
-
Screwdrivers
-
Power Drill (optional)
-
Drill Bit (optional)
If mounting to a support structure, you will also need the optional tools.
What to Expect with Your Installation
-
Must be able to secure the fan to building structure or funerated outlet box
-
Assess location
-
Check box to see fan weight
-
Angled Ceiling not supported
Installation Step 1 (Mount the Bracket)
Loosen screws from the canopy (don’t take off), take out the bracket from the
canopy.
With Outlet Box: Fix the bracket onto the outlet box with screws from the
outlet box, fix the cross bar of the bracket onto to the ceiling with 4 wood
screws (optional).
Without Outlet Box: Fix the cross bar onto the solid wood structure with
4 wood screws.
Installation Step 2 (Connect the Wires)
-
Hang the fixture onto the bracket with “S” hook provided.
-
Connect wires from the fixture to the wires from outlet box with wire nuts, ground wire (green, green/yellow or bare copper) to ground wire, neutral wire (white or blue) to the neutral wire, hot wire (black or brown) to the hot wire.
Wrap the connection with electrical tape. -
Take away the “S” hook.
Installation Step 3 (Fix the Canopy)
- Align the slots from the canopy to the ones on the bracket, fix the canopy onto the bracket with screws taken off.
- Tighten the screws but not over-tighten.
Installation Step 4 (Install the Remote Holder)
-
Insert 2 batteries before using:
AAA 1.5V battery x 2pcs (not included) -
Install the remote holder onto the wall with screws.
Remote Control Instructions
NOTE:
Please insert 2 batteries before using.
AAA 1.5V battery x 2pcs (not included
① : Turn off the light / fan
② : Natural wind of the fan, fan speed will change automatically when
using this function.
③④⑥⑦⑭⑮ : Turn on the fan / fan speed
⑤ : Turn off the fan
⑧⑩ : Adjust the brightness of the light
⑨ : Turn on / off the light
⑪ : Night mode, lights will be dimmed when press this button.
⑫: Quick switch of the light color: warm white→ cool white→ daylight
white
⑬ : Fan moves forwards or reversely.
⑯⑰ : Adjust the light color temperature.
⑱ : Timing the fan.
APP Control Instructions
NOTE: Scan the QR code and install the APP in your phone, or search and
install “Fan Lamp Pro” from Google Play, Apple App and other APP stores.
Make sure your phone is connected to the internet and Bluetooth enabled.
Pair button. Click it within 5 seconds after the fan is powered on from wall switch. After the fan flashes or beeps, it has been successfully paired with the phone, it can be controlled through it.
Slide to change the fan speed.
Slide to change the brightness of the light.
Quick switch for “White” light color.
Quick switch for “Yellow” light color.
Quick switch for “Natural” light color.
Night mode, dim the lights.
Fan moves forwards.
Change the direction of the wind (Not applicable on this fan).
Timing the fan.
Natural wind: fan speed will change automatically when use this function.
Sleeping wind (Not applicable on this fan).
Fan moves reversely.
Turn on/off the light.
Turn on/off the fan.
Unpair button. Click it within 5 seconds after the fan is powered on. After
the fan flashes or beeps, it has been successfully unpaired with the phone
Trouble Shooting
Fan doesn’t work
- Make sure the fixture is connected to an ON/OFF wall switch, not a dimmer switch.
- Check the remote control battery (not included in this package).
- Check the circuit breaker to ensure the power is on.
- Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram.
Lights Do Not Light Up / Flicker / Noisy Operation
- Make sure the fixture is connected to an ON/OFF wall switch, not a dimmer switch.
- Check your power and switch to make sure it’s powered on.
Noisy Operation
- Tighten the light fitting and blade bottom cover.
- Check to see if any of the blades are cracked. If so, replace all of the blades.
Remote does not work
- Make sure the battery is installed correctly.
- Pair the remote control again (See page 9).
- Install 2 new batteries.
Clean And Care
To clean, wipe the fixture with a soft cloth. Spraying from chemical cleaners can discolor the finish of the fixture. Do not use scouring pads, powders, steel wool, or abrasive paper to clean this fixture.
Ordering Parts
Keep this manual for future reference, and in case replacement parts are
needed.
Available parts can be ordered from the place of purchase. Use exact wording
from diagrams when ordering parts.
Contact Information
Please contact us with the following information:
- Screenshot of your order page, including product picture, name, and order ID number.
- Problem details with pictures / short video if possible.
Scan for Online Installation Video
Note: The product in the video may be different from this one.
Email: lightingcustomercare@gmail.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>