TRAIVIDIA QRC Self Monitoring Blood Glucose System User Guide
- June 1, 2024
- TRAIVIDIA
Table of Contents
TRAIVIDIA QRC Self Monitoring Blood Glucose System
Specifications
- Product Name: AIR Self-Monitoring Blood Glucose System
- Manufacturer: Trividia Health
- Customer Service Contact: 1-800-803-6025, Monday – Friday, 8 AM – 8 PM EST
- Website: www.trividiahealth.com
Product Usage Instructions
Before Testing
- Contact your healthcare professional for testing frequency and target blood glucose ranges.
- Read the Owner’s Booklet and Quick Reference Guide before the first test.
Blood Glucose Testing
Step 1
- Wash hands with warm, soapy water. Dry thoroughly.
Step 2
- Prepare a lancing device and remove a test strip from the vial.
Step 3
- Insert the test strip into the Test Port with black blocks facing up. The meter will turn on.
WARNING: Ensure the test strip vial cap is securely closed and check for any damaged parts before use.
After Testing
- Dispose of used test strips and lancets according to local regulations.
Additional Information
- For customer consultation in English or Spanish, contact Customer Care at 1-800-803-6025.
- Manufactured by Trividia Health. For more safety information, refer to FDA Public Health Notifications and CDC guidelines.
FAQ
- Q: What should I do if the meter displays an error message during testing?
- A: If you encounter an error message, refer to the Owner’s Booklet for troubleshooting steps. If the issue persists, contact Customer Care for assistance.
Before You Test
- Contact your Doctor or Healthcare Professional to determine how often you should test and what your target ranges are for blood glucose results.
- ALWAYS read the Owner’s Booklet before testing for the first time and before using this Quick Reference Guide.
Meter and Test Strip
Blood Glucose Testing
Step 1
Wash your hands with warm, soapy water. Dry thoroughly.
Step 2
Gather your materials and prepare your lancing device. Remove the test strip
from the vial and close the vial immediately.
Step 3
Insert strip into Test Port with black blocks facing up. The meter turns on.
Step 4
Lance fingertip. Allow blood drop to form.
Refer to lancing device Instructions for Use for detailed instructions.
Step 5
Wait until the Drop Symbol appears in Display. With the strip still in the
meter, touch the Tip of the strip to blood drop. Allow blood to be drawn into
the strip. Remove the test strip from the blood drop immediately after the
meter beeps and dashes appear across the Meter Display.
Step 6
Glucose results will be displayed with alternating dates and times.
Step 7
Hold the meter in a vertical position with the strip pointing down. Press the
Strip Release Button to discard the used strip from the meter. Testing is
complete.
Step 2 Tips
- Peel and discard the clear protective sticker from the Meter Display.
- Remove one Test Strip from the vial. Then immediately press down the vial cap firmly to close. See below for additional storage conditions.
Step 3 Tips
- With the meter off, insert the Test Strip into the Test Port with the Contact End (black blocks) facing up. The Meter turns on.
- DO NOT place the Test Strip in backwards.
Step 5 Tips
-
With the strip in a Meter, touch the Tip of the strip to blood drop.
-
DO NOT place blood onto the Test Strip before inserting the Test Strip into the Meter Test Port.
-
DO NOT place blood drops on top of the Test Strip or any other location except the Sample End (Tip) of the Test Strip.
After You Test
- ✔ ALWAYS store the test strips in the original vial with the cap tightly closed.
- ✔ ALWAYS keep the cap of the test strip vial tightly closed.
- ✘ NEVER transfer test strips from one vial to another. Do not expose to heat, moisture, or humidity.
- ✘ NEVER compare your meter to other meters.
- ✘ NEVER immerse meter or test strips in liquids or place any liquids onto the meter or into the Test Port.
- ✔ Store TRUE METRIX® AIR System in a dry place at room temperature (40°F-86°F) at 10%-80% relative humidity. DO NOT FREEZE.
- ✔ Dispose of used test strips and lancets under local regulations.
Additional Information
- ALL parts of your blood glucose monitoring system could carry blood-borne pathogens after use, even after cleaning and disinfecting.1,2
- Cleaning and disinfecting the lancing device and the meter destroys most, but not necessarily all, blood-borne pathogens.
- Wash your hands thoroughly with soap and warm water before and after handling the meter, lancing device, lancets, or test strips as contact with blood presents an infection risk.
- If the meter is being operated by a second person who provides testing assistance, the meter and lancing device should be disinfected before use by the second person.
- It is important to keep the meter and the lancing device clean and disinfected. For instructions on how to clean and disinfect the meter and lancing device, see Meter Cleaning and Disinfecting and Lancing Device Cleaning and Disinfecting in the Owner’s Booklet.
CONTACT
- Customer Consultation
- English or Spanish, Monday – Friday,
- 8AM -8PM EST, 1-800-803-6025
- www.trividiahealth.com
FDA Public Health Notification: Use of Fingerstick Devices on More than One
Person Poses Risk for Transmitting Bloodborne Pathogens: Initial
Communication. Available at https://wayback.archive-it.
org/7993/20170111013014/http://www.fda.gov/MedicalDevices/Safety/
AlertsandNotices/ucm224025.htm. 2. Infection Prevention during Blood
Glucose Monitoring and Insulin Administration. Available at
http://www.cdc.gov/injectionsafety/blood-glucose-
monitoring.html.
© 2023 Trividia Health, Inc. TRUE METRIX and Trividia Health logo are
trademarks of Trividia Health, Inc. REA4TVH08 Rev.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>