SATCO S11259 Starfish Wifi Smart 4 Inch Led Downlight Instruction Manual
- June 5, 2024
- SATCO
Table of Contents
SALE on SATCO @www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
STARFISH WIFI SMART 4″ LED DOWNLIGHT
Model: S11259
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing the fixture. Retain for future reference.
WARNING: Risk of Fire or Electric Shock
- LED Retrofit Kit installation requires knowledge of luminary electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.
- To reduce the risk of fire and over-heating, secure all connections.
- TURN OFF the electrical power before proceeding.
- Install this kit only in luminaires that have the construction features and dimensions shown in the photographs and/or drawings and where the input rating of the retrofit kit does not exceed the input rating of the luminaire.
- The electrical rating of this product is 120V/60Hz.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
- This retrofit kit is accepted as a component of a luminaire where the suitability of the combination shall be determined by authorities having jurisdiction.
- This device is not intended for use with emergency exits.
- Suitable for wet locations, covered ceiling-mounted luminaire.
WARRANTY: This product is guaranteed a 5-year warranty. Any quality issue in normal use within the warranty period will be repaired or replaced according to the situation and under the condition, specifications can be provided. Visit www.Satco.com for full warranty details and dimmer compatibility information.
INSTALLATION
STEP 1 : Turn OFF power prior to installation.
STEP 2: Remove existing trim installed in recessed housing (if
necessary).
STEP 3: If applicable, slide lamp holder bracket to its upward maximum
position. If the lamp holder bracket is less than 4 1/2″ from the bottom edge
of the fixture enclosure, the lamp holder bracket must be removed.
STEP 4: If necessary, remove the lamp holder mounting bracket and the
lamp holder from the bracket, then attach the provided label to the existing
luminaire. See Figure A.
STEP 5: Install the
adapter into the socket. See Figure B.
STEP 6: Connect the
orange terminals together. See Figure C.
STEP 7: Insert torsion
springs into luminaire housing brackets. See Figure D.
STEP 8: Gently push up
trim and torsion springs so they begin to expand and lift trim in place. See
Figure E. Installation is complete. Turn power ON.
STEP 9: App Connection: To connect your device, download the free
“Starfish Smart Lighting” App from the app store. Please refer to our Starfish
User Guide for detailed instructions on how to pair your device.
https://smartapp.tuya.com/satcosmart
Satco Products, Inc.
Brentwood, NY 11717
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>