zoobaa XL Elevated Dog House Instruction Manual
- June 16, 2024
- zoobaa
Table of Contents
zoobaa XL Elevated Dog House Instruction
Specifications
- Dimensions: A – 95mm, B – 850mm, C – 358mm, D – 795mm, E – 1180mm, F – 531mm
- Components: A – 4, B – 4, C – 2, D – 4, E – 6, F – 4, G – 3, H – 2, J – 1, K – 2, L – 1
Installation
Before getting started, make sure the package contains all the components.
CAUTION: Packing material is not a toy. Ensure it is kept out of children’s reach, and keep your pet away from it to prevent suffocation.
- After unpacking, check the individual pieces of the Elevated Doghouse for damages. In case you remark damages on individual pieces, do not assemble the doghouse, but contact the vendor first.
- Do not allow anyone who does not understand this instruction manual to set up the Elevated Doghouse.
- Use care when handling iron tubes as they may have sharp edges.
- Do not assemble products without sufficient space. Do not put heavy stuff on this product. Please install the product on a soft surface to avoid damage to the ground.
- Do not let children climb on or play with this product. Do not let children, pets, or persons with reduced physical, sensory, or mental abilities play around while setting up this product.
- Use only parts and accessories that the manufacturer recommends.
- Please keep this instruction manual for future reference.
Method of Use
- Roll up the two covers on the top and fasten them with straps.
Maintenance Information
Please hose the fabric off every month with clear water.
Follow the steps below to clean the Textilene fabric:
- Brush off loose dirt
- Hose down
- Prepare a cleaning mixture of water & mild, natural soap (no detergents)
- Use a soft bristle brush to clean
- Allow soap to soak in
- Rinse thoroughly
- Air dry
Warranty Information
60-Day replacement & warranty
Contact Detail
Customer Service Phone: 833-877-8735
FAQ
-
Q: How often should I clean the fabric?
A: It is recommended to hose the fabric off every month with clear water. Follow the cleaning steps mentioned in the maintenance information section for a thorough cleaning. -
Q: Can children play on or around the Elevated Dog House?
A: No, it is not safe for children, pets, or persons with reduced physical, sensory, or mental abilities to play on or around the Elevated Dog House while setting it up. -
Q: Can I use this product without assembling all the components?
A: No, it is important to assemble all the components according to the installation instructions provided in the manual to ensure proper functionality and safety.
INSTALLATION
- Packing material is not a toy. Ensure it is kept out of children’s reach, and keep your pet away from it. The danger of suffocation!
- After unpacking, check the individual pieces of the Elevated Doghouse for damages. In case you remark damages on individual pieces, do not assemble the doghouse, but contact the vendor first.
- Do not allow anyone who does not understand this instruction manual to set up the Elevated Doghouse.
- Use care when handling iron tubes as they may have sharp edges.
- Do not assemble products without sufficient space.
- Do not put heavy stuff on this product. Please install the product on a soft surface to avoid damage to the ground.
- Do not let children climb on or play with this product.
- Do not let children, pets, or persons with reduced physical, sensory, or mental abilities play around while setting up this product.
- Use only parts and accessories that the manufacturer recommends.
- Please keep this instruction manual for future reference.
WARNING
Before getting started, make sure the package contains all the components.
Suffocation Caution!
Keep any pack age materials from children or pets, these materials are a
potential source of suffocation.
COMPONENTS
STEP 1
- Straighten the C/F/G that are connected with linking ropes.
- Align the round holes of H and install them.
STEP 2
- Insert A into connectors(B).
- Attach the longer connectors(D) to H.
STEP 3
- Lay down the base canvas(J) with the hook and loop tape side facing up.
- Inser C into the short sleeve.
STEP 4
- Insert E into the long sleeve.Connect C and E with connector B.
- Assemble E to connector D.
- Continue assembling connectors and tubes.
- Put the second C between the hook and loop tape and link it with connector B.
- Close the hook and loop the tape tightly.
STEP 5
- Lay down the base canvas(J) with the hook and loop tape side facing up.
- Insert F into four connectors(B).
Note : Insert the end of F with a downward mark into the four connectors.
STEP 6
- Insert G into F.
- Connect F with connectors(K).
- Insert G into connector(K).
STEP 7
- Place the cover(L) onto the frame.
- The base canvas(J) without the hook and loop tape side is the front door.
- The base canvas(J) with zoobaa logo is the front door.
- Fasten the hook and loop tapes on all sides.
METHOD OF USE
- Roll up the two covers on the top and fasten them with straps.
MAINTENANCE INFORMATION
Please hose the fabric off every month with clear water.
More Steps on Cleaning Textilene’s Lovely Home for Puppies:
- Brush off loose dirt
- Hose down
- Prepare a cleaning mixture of water & mild, natural soap(no detergents)
- Use a soft bristle b rush to clean
- Allow soap to soak in
- Rin se tho roughly
- Air dry
WARRANTY INFORMATION
60-Day replacement & warranty
CONTACT DETAIL
Customer Service Phone: 833-877-8735
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>