TESLA Air 3 Lite Portable Air Purifier User Manual

TESLA Air 3 Lite Portable Air Purifier

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to people.
These precautions include:

1. Read all instructions before using the appliance.
2. To avoid fire or shock hazards, plug the appliance directly into the correct electrical outlet.
3. If the filter is covered by a bag when shipped, remove the plastic bag before use.
4. Keep the cord out of heavy traffic areas. To avoid fire hazards, NEVER put the cord under rugs, near heat registers, radiators, stoves, or heaters.
5. To protect against electrical hazards, DO NOT immerse the appliance in water or other liquids. Do not use near water.
6. Close supervision is necessary when any appliance is used by or near children, or disabled persons.
7. Always unplug the air purifier before moving or cleaning the unit, opening the grill, changing the filter, and whenever the unit is not in use. To disconnect the unit, be sure to pull the plug and not the cord.
8. NEVER drop or insert any objects into the openings of the unit.
9. DO NOT operate any appliance with a damaged cord or plug. If the motor fan fails to operate or the unit has been dropped or damaged in any manner, return the appliance to the manufacturer for examination and/or repair.
10. Use the appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by the manufacturer may cause hazards.
11. DO NOT use outdoors.
12. NEVE R place on a soft surface such as a bed or sofa as this could cause the unit to tip over and block the air inlet or outlet grills.
13. Keep the unit away from heated surfaces and open flames.
14. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user-serviceable parts. All servicing should be performed by an authorized person.
15. DO NOT place anything on top of the unit.
16. NEVER use detergents, gasoline, glass purifier, furniture polish, paint thinner, or other household solvents to clean any part of the appliance.
17. Always turn the appliance off before unplugging it.
18. This appliance should only be used in the rooms with temperatures between 4°C and 43°C.
19. WARNING: To reduce the risk of fire or electric shock, DO NOT use the appliance with any solid-state speed control device.

PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS

PRODUCT STRUCTURE

Welcome to using our company’s air purifier.
Before use, please read this manual carefully to operate the product correctly.

1. Control panel
2. Light ring
3. Outlet cover
4. Upper body
5. Lower body
6. Filter
7. Base cover

BEFORE FIRST USE

Placing the filter
The appliance comes with all filter fitted inside, but you have to remove the packaging of the filter before you can use the appliance. Remove all filter, unpack them and place them back into the appliance as described below.

NOTE: Make sure you insert the filter in the correct position.

1. Put the appliance upside down on a soft cloth to avoid scratching. To open the base cover, you need to find an arrow point on the base cover corresponding to the LOCK position, turn the base cover counterclockwise from LOCK to OPEN position, then release the lock.
2. Remove the base cover and take out the filter.
3. Remove the packaging material from the filter.
4. Turn the base cover clockwise from OPEN position to LOCK position. When you hear a “click” sound, the base cover is fastened.
5. Turn the base cover clockwise from the OPEN position to the LOCK position. When you hear a “click” sound, the base cover is fastened.

USING THE APPLIANCE

About the control panel

1. Put the plug in the wall socket
   All lights go on once and you hear a beep.
   Then the lights go out again

2. Press the power button to switch on the appliance.
   The power lights and FAN SPEED 2 light (Medium) on the control panel go on.

3. Fan speed adjustment
   The fan speed light indicates at which fan speed the appliance is operating. Press the Speed button to adjust the fan speed level. There are three levels: 1~3 refers to the Low, Medium, and High levels.

4. Sleep mode
   When you use the purifier in Sleep mode, it operates very quietly.
   Press the button to activate the sleep mode. Press any of the button to switch off sleep mode except the Filter button and Timer button.

5. Light
   Working Status

   • Turn on the unit, the light of 7 colors will be illuminated, and change cycles.

   • Then press the Light button again and the color of the light will stop changing. You can choose the color you like.

   • To turn off the light, press the button the third time

   • Cycles through per above pressing.
     Standby status (Night light mode)

   • At standby status, press the button, the amber night light will turn on.

   • Press the button again, the light become half brightness, to turn off the night light, just press the button the third time. The light cycles through modes in the following order: Brightness, Half brightness, OFF.

6. Setting timer

   • Press to turn the timer on or off, and to cycle through timer options (2 hours, 4 hours, or 8 hours).
   • The air purifier will automatically power off once the timer is finished.
     NOTE: Pressing or unplugging the air purifier will cancel the timer

7. Filter replacement light
   When the indicator turns on, it means that you should check the if the filter needs to be cleaned or replaced.

NOTE: The filter’s lifetime is based to your house air quality and using time.If the appliance operates in a humid environment, the lifetime of the HEPA filter will be reduced.

Cleaning the air purifier

Regularly clean the inside and outside of the body to prevent dust from accumulating inside and outside.

1. Wipe away dust from the appliance with a soft dry cloth.

2. Clean the air inlet and the air outlet with a soft dry cloth.
   NOTE:

   • Always unplug the appliance before you clean it.
   • Never immerse the appliance in water or any other liquid.
   • Never use aggressive or flammable cleaning agents such as bleach or alcohol to clean any part of the appliance.
   • The HEPA filter is NOT washable.

FILTER REPLACEMENT

When should I replace the Air filter?
It is recommended to change the air filter every 6–8 months. However, you may need to change your filter sooner or later depending on how often you use your air purifier. It is important to watch out for the following signs of an expired filter:

• Increased operating noise
• Decreased airflow
• Clogged filter
• The increased presence of odors

NOTE:

• The environment in which the air purifier is being used may also extend or shorten the lifetime of the filter. Using your air purifier in a relatively high-polluted environment may mean that you will need to change the air filter more frequently.
• If the air pollution in your environment is very high, there is a possibility that the filter may not be completely effective and may need to be replaced before the indicator lights up.
• Remember to reset the air purifier after changing the air filter.

1. Switch off the appliance and unplug it.

2. Put the appliance upside down on a soft cloth to avoid scratching. To open the base cover, you need to find an arrow point on the base cover corresponding to the LOCK position, turn the base cover counterclockwise from LOCK to OPEN position, then release the lock.

3. Remove the old filter.

4. Remove the packaging material of the new filter.

5. Put the new filter back into the appliance.

6.  Turn the base cover clockwise from the OPEN position to the LOCK position, you will hear a “click” sound, the base cover is fastened.
   .

7. Put the plug in the wall socket and switch on the appliance again.

8. Reset the Filter’s lifetime.
   The filter lifetime should be reset if lights up. After replacing the old filter, you need to reset the filter lifetime

• Plug in the air purifier and turn it on.
• Press and hold for 3 seconds
• Release and the light will turn off, indicating that the reset is complete.

Forced filter replacement
When using the air purifier in an environment of heavy pollution, the lifespan of the filter may be significantly reduced. You can change the filters even if do not light up. Follow the steps below to perform a hard reset.

1. Replace the filters as mentioned in the Filter Replacement section.
2. Plug in the air purifier and keep it in standby mode.
3. Press and hold for 3 seconds, until it lights up.
4. Press and hold again for 3 seconds, and it will turn off. The reset is now complete.

STORAGE

Unplug the power cord, then wipe the machine clean, put the appliance in the packing bag, then put it in a dry place away.

ENVIRONMENT

Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment.

TROUBLESHOOTING

This chapter summarizes the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country.

Air purifier does not power on.

| The unit is not plugged into an electrical outlet.| Connect the plug to a powered electrical outlet.
The outlet is not working properly.| Try plugging the air purifier into a different outlet.
The power button has not been pressed after plugging in the air purifier.|

Press

|

once to turn on the air purifier.

The power cord is damaged.|

Immediately discontinue use and contact Customer Support.

Air purifier is defective or malfunctioning.

Air purifier does not respond to button controls

| Air purifier is not plugged into an outlet.| Connect the plug to a power electrical outlet.
Air purifier is defective or malfunctioning.| Immediately discontinue use and contact Customer Support.
Air purifier makes an unusual noise while operating.|

Filter is dirty.

| Replace the filter as instructed in the

Filter Replacement section.

Air purifier makes an unusual noise while operating.

| The filter does not fit properly.| Properly place filter as noted in the Before first use and Filter Replacement sections.

The foreign object inside the unit.

| Immediately discontinue use and contact Customer Support. DO NOT attempt to open the air purifier.

Significantly reduced airflow.

| Filter packaging has not been removed.| Remove the filter from packing before use.
Fan speed is low.| Press| to adjust fan speed.
Filter need to be replaced.| Replace the filter as instructed in the

Filter Replacement section.

Not enough clearance on all sides of the purifier.| Ensure there is at least 38 cm of clearance on all sides of the purifier.

Poor air purification quality

| Filter needs to be replaced.| Replace the filter as instructed in the

Filter Replacement section.

The room is to large for the air purifiers applicable area.| Ensure the room is smaller then 12 m².
The Air inlet or outlet is blocked.| Remove objects blocking the air inlet or outlet.
Filter is not properly placed in housing.| Properly place filter as noted in the Before first use and Filter Replacement sections.
The filter reset button is

still illuminated after replacing the filter.

|

The air purifier has been reset incorrectly.

|

See the Filter Replacement section on hot to properly reset the unit.

The air purifier turns on, then suddenly turns off.|

The air purifier is defective or malfunctioning.

|

Immediately discontinue use and contact Customer Support. DO NOT attempt to open the air purifier for self-servicing.

Air purifier beeps repeatedly after being powered on or plugged in.

References

• Tesla.info | Technology for all

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>