BLAUPUNKT TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System Instruction Manual

June 5, 2024
Blaupunkt

BLAUPUNKT TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System

Operating and Installation Instructions

CAUTIONS
  • Safety Notes
    This TPMS (Tire Pressure Monitoring System) has been manufactured according to established safety guidelines. However, dangers may still occur if the safety notes in this manual is not observed. This manual is intended to familiarize the user with the TPMS’s important functions. Read this carefully, prior to using the appliance. Keep this manual in an easily accessible location. In addition, do observe the instructions of the devices used in conjunction with this appliance.

  • Road Safety
    Always observe the following notes for road safety:

    • Device must be used in a way that compliments the safety of the user when driving the vehicle. It is recommended for the user to park at an appro-priate location when examining the tires in case of abnormal alert.
  • General Safety

    • Device is intended for installation and operation in a vehicle with 12V vehicle system outage, hence the device must be installed 500mm away from the DVD or high power equipment to prevent signal disruption.
    • Do not dismantle or modify the device. Installation or repair should be performed by a specialist. Blaupunkt is not liable for any loss or damage resulting from unauthorized disassembly or modification to the device.
    • Device is designed to monitor tire pressure and temperature only. Driver is responsible for the upkeep of the tires.
    • Blaupunkt is not liable in case of loss of sensors. Con-tact your Blaupunkt dealer to purchase new sensors.
    • Package comes with pre-set sensor for designated tires. In case of sensor replacement or change of sensor location, ensure the sensor are reprogrammed before operating.
    • Please do not operate the device under such conditions (extremely high temperature or extremely low temperature); ensure that the temperature within the car ranges from -30°C to 80°C before you begin installation process and during operation.
    • For abnormalities, please refer to the “Trouble-shooting” section. Consult with Blaupunkt dealer for further examining, in case if the problem cannot be resolved.

This manual may be updated from time to time without any notice.

Disclaimer

In no event shall Blaupunkt be liable for any direct, indirect, punitive, incidental, special consequential damages to property or life and whatsoever arising out of or connected with the use or misuse of our products. USA & CANADA: This product is not intended for sale in the United States and Canada. If purchased in the U.S. or Canada, this product is purchased on as-is basis. No warranty, whether expressed or implied is provided in the U.S. or Canada.

STRUCTURE & FUNCTIONS

Display

BLAUPUNKT TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig2

  1. Data Display
  2. Pressure Unit
  3. Display Battery Status
  4. OK Button
  5. Setting Button
  6. TPMS Alarm Icon

External Sensor

  1. Sensor Cover
  2. Battery Holder
  3. Battery
  4. Sensor
  5. Rubber Seal
  6. Base

Valve Sensor

  1. Dust Cap
  2. Aluminium Alloy Nut
  3. Aluminium Alloy Valve
  4. Transmitter

SPECIFICATIONS

BLAUPUNKT TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig5

EXTERNAL SENSOR INSTALLATION

BLAUPUNKT TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig6 BLAUPUNKT TPMS
TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig7

EXTERNAL SENSOR BATTERY REPLACEMENT

BLAUPUNKT TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig8 BLAUPUNKT TPMS
TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig9

VALVE SENSOR INSTALLATION

BLAUPUNKT TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig10 BLAUPUNKT
TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig11

DISPLAY INSTALLATION

DIFFERENT SCENARIO

BLAUPUNKT TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig15 BLAUPUNKT
TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig16

WIRING DIAGRAM

SETTING

BLAUPUNKT TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig17 BLAUPUNKT
TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig17 BLAUPUNKT
TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig19 BLAUPUNKT
TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig20 BLAUPUNKT
TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig21 BLAUPUNKT
TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System-
fig22

TROUBLESHOOTING

If any of the following problem occur, please resort to Troubleshooting for the possible solutions. Consult Blaupunkt
authorized dealer if problem persist.

Problems Solutions
Air leakage after sensor installation The tire valves may not be universal

standard, please check with the local

workshop.

No tire data are displayed after

completing installation

| Ensure ACC is turned on.
Missing or lost sensor| Please purchase new sensor.
External sensor battery low| Please replace with battery CR1632.
Change of tire location| Please reprogram the corresponding sensors.

Designed and engineered by Blaupunkt Competence Centre

Documents / Resources

| BLAUPUNKT TPMS TY1.0 Wireless Real-Time Tire Pressure Monitoring System [pdf] Instruction Manual
TPMS TY1.0, Wireless Real-Time Tire Pressure Monitoring System
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals