EUROM 351651 Safe-T-Shine 1200 Compact Instruction Manual

: June 5, 2024
: EUROM

Table of Contents

Thank you
Technical data
Warning electric heaters
Description
Assembly, location, and connection
Use and operation
Safety features
Cleaning and maintenance
Removal
CE–declaration
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

351651 Safe-T-Shine 1200 Compact
Instruction Manual

Safe-T-Shine 1200 Compact
Art. nr. 351651 351668 (Swiss plug)

This product is only suitable for well-insulated spaces of occasional use.

EUROM 351651 Safe-T-Shine 1200 Compact - FIG

Information required for the electric local space heaters

Thank you

Thank you very much for choosing a EUROM device. You have made a good choice! We hope you will be satisfied with its functioning. To get maximum profit from your product, it is important to read this manual attentively and totally before use and to understand what is written. Read especially the safety instructions: they are there to protect you and your environment. Keep the manual in a safe place for future reference. The store also the package: that is the best protection for your product in times of no-use. And if you at any time pass the appliance on, passon the manual and package too.
We wish you a lot of fun with the Safe-T-Shine 1200 compact!
Eurom
Kokosstraat 20
8281 JC Genemuiden (NL)
info@eurom.nl
www.eurom.nl
This manual has complied with the utmost care. Nevertheless, we reserve the ight to optimize this manual at any time and to adjust it technically. The image used may differ.

Symbol explanation
EUROM 351651 Safe-T-Shine 1200 Compact - FIG 1 Do not cover the device!

Technical data

Supply voltage	220-240V-50Hz
Maximum capacity	1200 Watt
Settings	0-400-800-1200 Watt
Oscillating	+
Dimensions	22 x 32 x 50 cm
Weight	1,44 kg

Warning electric heaters

Safety warning – general

Read the user instructions carefully and completely before using (and installing) this device. Keep the instruction leaflet somewhere safe so that you can consult it and pass it on in future.
Before use, check your new device (including cable and plug) for any visible damage. Never use a damaged device but take it back to the supplier for a replacement.
In the event of incorrect usage or installation, there is a risk of electric shocks and/or a fire hazard.

Warnings positon device

Only use the device when the foot have been installed. Using the device without foot creates a significant risk of fire. Always remove the plug from the socket if you are installing/removing it.
This device is not suitable for wall or ceiling installation.
Do not use this device in the immediate vicinity of a bath, shower or swimming pool.
This device is not suitable for use in damp spaces such as bathrooms, washrooms, etc. Never locate the device near water points and reservoirs (tap, bath, shower, toilet, sink, swimming pool, etc.). Make sure that the device cannot fall into the water and that it cannot be penetrated by water. If the device falls into the water make sure you remove the plug from the socket! Do not use a device that is wet inside but take it to be repaired. Never immerse the device, cable or plug in water or any other fluid, and never touch the device with wet hands.
The air around the device must be able to circulate freely. Never install it too close to walls or large objects and never under a shelf, cupboard, curtains or similar. When locating the device, make sure you have the following minimum free space:
Front, minimum free space 100 cm
Back, the minimum free space was 50 cm
Sides, minimum free space 50 cm
Top, minimum free space 100 cm
Always place the unit on a sturdy, flat horizontal surface
The base on which the device is placed must not be made of flammable materials.It must be resistant to temperatures of at least 125°C without burning, melting, deforming or bursting into flames. Check regularly to ensure that the surface is not overheating; this could be dangerous!
Never place the device on surfaces such as beds or deep-pile carpets, the device may fall over.
Do not place the device near an open window as rain could blow in; do not place it on wet surfaces and avoid any liquids being spilled nearby. Do not place the device behind a door or along a walking route to avoid accidental trips.
Do not place the device near, under or facing an electrical socket and not in the vicinity of an open fire or heat source.
Do not use the device nearby or facing furniture, curtains, paper, clothing, bedding or other flammable materials. Keep at least 1 meter from the device!
Do not use the heater outdoors or in areas that are smaller than 15m³.
The device contains hot and/or glowing and sparking components.
Do not, therefore, use where fuels, paint, flammable fluids, and/or gases are stored.
Do not use the device in an environment that poses a fire risk, e.g. near gas tanks, gas pipes, or aerosols. This is an explosion and fire risk!

Warnings – use

Do not use additions/accessories on the device that have not been supplied or approved by the manufacturer.
Only use the device for its intended purpose and in the manner set out in this instruction leaflet.
Some parts of this device will get very hot and could cause burns. You must pay particular attention to children, vulnerable persons and pets that are present near the device. Never leave them alone with a working device.
Never cover or block the device; it will overheat and this could lead to a fire risk. Never hang or place objects such as clothing, blankets, cushions, paper, etc. on the device. The minimum distance of 1 meter between the device and flammable materials must always be applied. Ventilation openings should never be blocked as this may pose a fire risk. Never use the device to dry clothing or place anything on it. Do not let anything lean against the device!
Do not set the device to come on automatically using a timer, clock, or another facility. You must always check for safe conditions before using the fireplace! Never use the device with an external voltage regulator such as a dimmer or similar, as this could be dangerous!
The device is exclusively intended for normal, household usage. Only use for providing heat in your home.
The connection voltage and frequency, as given on the device, must correspond to that of the socket to be used. The electrical socket to be used must be an earthed connection. The electrical installation must be protected via a 30 mA earth leakage circuit breaker. The electrical socket that you are using must be to hand at all times in order to be able to remove the plug from the socket in the event of an emergency.
To avoid overloading and/or fuses being blown, do not use any other equipment on the same socket or electrical group as the one used for the device.
Unroll the electric cable for the device fully before inserting the plug into the socket and ensure that the electrical cable does not come into contact with the fireplace or get hot. Do not run the electrical cable under the carpet, cover it with mats, runners or similar, and do not place in areas that are walked on frequently. Ensure that it cannot be stepped on and that no furniture is placed on top of it. Do not bend the electrical cable around sharp corners and do not roll up too tightly after use! Prevent the electrical cable from coming into contact with oil, solvents and sharp objects. Check the cable and plug regularly for damage. Do not bend or pinch the electrical cable and do not wind it around the device; this could damage the insulation!
The use of an extension cable is not advised as this can lead to overheating and fire. If the use of an extension cable is unavoidable, make sure that it is not damaged and that it is an approved extension cable with a minimum diameter of 3×1,5mm² and a minimum permitted capacity of 1500 Watt. Always fully extend the cable in order to prevent overheating.
Only connect the device to a fixed socket. Do not use multi-plug adapters or similar.
During use, the plug may begin to feel warm; this is normal. If it’s really warm, there may be something wrong with the socket. Please contact your electrician.
Always turn off the device and remove the plug from the power socket: Never turn the device off using the plug!
Prevent foreign objects from entering the radiation/ventilation or outlet openings on the device. This may cause electric shock, fire or damage.
Never leave a working device unattended but switch it off and then remove the plug from the socket.
Always remove the plug from the socket when the unit is not in use! Always remove plug by pulling on the plug itself; never pull on the electrical cable!
This device gets hot during use. Never touch the device when it is on or shortly thereafter; it could burn you.
This device is not equipped to monitor the ambient temperature in the room. Do not use the device in small rooms if these rooms are used by persons who are not capable of leaving the room independently unless there is constant supervision.
Never operate the device with wet hands.

Warnings by whom the device may be used

Children younger than 3 must be kept out of the vicinity of the device unless they are continuously supervised.
Children between the ages of 3 and 8 may only switch the device on or off if it is set up or installed at its usual location and they are supervised or have received instructions regarding the safe use f the device and understand the corresponding hazards. Children between the ages of 3 and 8 may not insert the plug into the socket, adjust the device settings or clean or maintain it.
This device can only be used by children from the age of 8 and elderly persons and persons with diminished physical or mental capacities or a lack of experience and expertise if they are supervised or have received instructions regarding the safe use of the device and understand the corresponding hazards.
Children may not clean or maintain the device without supervision.
Children may not play with the device.

Warnings for maintenance

Keep the device clean. Dust, dirt, and/or deposits in the device often lead to overheating. Ensure that this type of build-up is regularly removed.
Always switch the device off, remove the plug from the socket and let the device cool down before you:
– clean the device
– users maintain the device.
– touch or move the device.
Never switch the device on if you have noticed damage to the evice itself, the cable or plug or if it does not work properly, makes strange noises, smells odd or you can see smoke, or if it has fallen r shows any other signs of damage. Remove the plug from the socket immediately. Take the entire device back to your supplier or a recognized electrician to be checked and/or repaired. Always ask for original parts to be used.
The device may only be opened and/or repaired by a competent and qualified person. Do not carry out your own repairs as this could be dangerous! Repairs carried out by unauthorized persons or changes made to the device could damage the dust/waterproof capacity of the device and will nullify the guarantee and the manufacturer’s liability.
If the electrical cable is damaged, it must be replaced by the manufacturer, their service department, or somebody with similar qualifications in order to prevent creating a hazard. Failing to adhere to points 3, 4, and 5, could lead to damage, fire, and/or personal injury. They will invalidate the guarantee and the supplier, importer, and/or manufacturer shall not be liable for the consequences.

Description

EUROM 351651 Safe-T-Shine 1200 Compact - FIG 2

1. On / Off switch upper halogen lamp2. On / Off switch, middle halogen lam3. On / Off switch lower halogen lamp4. Oscillation switch
5. Housing
6. Radiation grille
7. Halogen lamp
8. Reflector
9. Radiation grille| 10. Grill
11. Housing
12. Foot
13. Handle
14. Electric cable with plug
15. Fixing screws
16. Anti-tip protection
17. Electrical cable guide
---|---

Assembly, location, and connection

Remove all packaging material and keep it out of reach of children. After removing the packaging, check the appliance for damage or other signs that could indicate a fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your vendor for inspection or replacement.
The device consists of two parts that you must fit together before use: the actual device and the base.

Lead the electrical cable with a plug through the middle hole in the base; from top to bottom (the hollow side of the base is the underside).
Now slide the base over the small white box with the electrical cable on the underside of the device: all hollow spaces and protrusions and screw holes on top of each other. It only fits in one way.
Now firmly fasten the base and the device together using the two safety screws included in the package.
Select a suitable location for the device taking into account all the warnings mentioned earlier in this manual.
Lead the electrical cable through the cable clamps and recess to outside the base and place the device upright

Caution! A push-button is located beneath the heater: this is the safety tipover cut-out switch. Knocking over the heater will cause this buttontoprotrude and the heater will turn off automatically. This means the heater will not work when hanging.

Use and operation

Check that all buttons are turned off, ie not pressed.
Unwind the electrical cable completely and insert the plug into a suitable 220240V earthed socket.
Select the desired heating level by pressing the On / Off switches (1, 2, 3)
The heater has 3 heating elements of 400 W each, which can be switched on separately.
Now when you press the oscillation switch (4), the device will pivot approximately 90 ° horizontally. Pressing this switch again switches the function off.
To switch off the appliance, all switches press O individually. Then remove the
plug from the socket. Never leave the heater connected to the power supply when it is not in use!
Note: When you use the heater for the first time, it may smoke slightly and give off an odor. This is normal and harmless and should disappear after a few minutes. If this does not happen and the heater continues to smoke, switch off all the heating elements and remove the plug from the socket and contact your supplier.
The heater, and particularly the radiation grid, become extremely hot during use and will also remain warm for some time after the heater has been switched off. Take this into account!
If you wish to relocate the heater, first switch it off, remove the plug from the socket and allow it to cool down before moving it. To relocate the heater, use the handle.

Safety features

The heater is fitted with a tipping safeguard which automatically shuts off the appliance if it inadvertently falls over. However, this does not rule out all risks: even after the heater has been switched off, it and particularly the radiation grid, will remain very hot for some time and if it is left lying, for example, on a wooden floor or carpet, it can cause fire/melting/scorching damage and result in a fire.
Therefore remain cautious at all times! When the heater is returned to its upright position, it will resume functioning as normal but, before reusing, switch off, unplug and check for damage. Do not use
the heater if it is damaged or malfunctioning, but have it inspected/repaired!

Cleaning and maintenance

Keep the heater clean. Dust, dirt, and/or deposits in the heater are a common cause of damage or faults! So these should be removed regularly. Switch off the heater, remove the plug from the socket and allow the heater to cool down before cleaning or carrying out maintenance work.

Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes, or chemical solutions!
Using a vacuum cleaner, carefully remove any dust and dirt from the grills. Be careful not to touch or damage any internal parts during cleaning!
The heater contains no other parts which need maintenance.
At the end of the season, store the cleaned heater in the original packaging if necessary. Store it upright in a cool, dry, and dust-free place.

Removal

In the EU this symbol indicates that this product may not be disposed of as ordinary household waste. Old equipment contains valuable materials, suitable for recycling. These materials should be made suitable for reuse in order to prevent any adverse effects to health and the environment caused by unregulated waste collection. Therefore, please make sure that you bring old equipment to a designated collection point. Alternatively, contact the original supplier, who can make sure that as many of the components as possible can be recycled.

CE-statement
See page 82.

CE–declaration

Euro
Kokosstraat 20
8281 JC Genemuiden
The Netherlands
declares the following device in sole responsibility:
Product: halogen heater
Brand name: EUROM
Model: Safe-t-Shine 1200 Compact
Item number: 351651 / 351668 (Swiss plug)

Complies with the following harmonization rules: Low Voltage Directive: LVD 2014/35/EU
Electromagnetic compatibility Directive: EMC 2014/30/EU
Restriction of Hazardous Substances RoHS Directive: 2011/65/EU&(EU)2015/863
Framework Directive Ecodesign requirements: ERP 2009/125/EC
regulation Ecodesign requirements for individual room heaters: (EU) 2015/1188
Regulation Ecodesign requirements Electricity Consumption in standby and off- state: 1275/2008/EC

Applied harmonized standards:
EN 60335-2-30:2009+A11:2012
EN 60335-1:2012+A11:2014+A13:2017
EN 62233:2008
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
Genemuiden, 27-05-2020
W.J. Bakker, alg. Dir.

EUROM
Kokosstraat 20
8281 JC Genemuiden
The Netherlands
info@eurom.nl
www.eurom.nl