Onforu Portable Bluetooth Speaker for Bike, IP65 Waterproof & Dustproof-Complete Features/User Guide
- June 5, 2024
- ONFORU
Table of Contents
Onforu Portable Bluetooth Speaker for Bike, IP65 Waterproof & Dustproof
Specifications
- CONNECTIVITY TECHNOLOGY: Bluetooth
- SPEAKER TYPE: Outdoor
- BRAND: Onforu
- MODEL NAME: PORTABLE, RECOMMENDED USES FOR PRODUCT: Travel, Cycling, Outdoor, Hiking, Camping
- PRODUCT DIMENSIONS: 3.66 x 3.25 x 3.07 inches
- ITEM WEIGHT: 5.7 ounces
- WATERPROOF: IP65
- BLUETOOTH: 5.0
- POWER OUTPUT: 5W
- PLAYBACK TIME: 10 hours (60% volume)
Introduction
This bike speaker has an adjustable bike holder and a thick gasket, so bikers can listen to music on their bumpy ride without worrying about their speaker falling out. This bicycle speaker has an IP65 waterproof rating, making it water-resistant. So, it won’t be affected by bad weather, making it ideal for riding, the beach, the pool, the toilet, and other indoor or outdoor activities. When compared to other Bluetooth 4.2 wireless speakers, this speaker provides a more steady and consistent connection. At 60% volume, this portable Bluetooth speaker may last up to 10 hours. You may enjoy the high- definition stereo sound! This little Bluetooth speaker is only 3.24 inches long, making it easy to transport. It’s also more portable for travel thanks to the metal hook.
HOW TO CONNECT
To pair your Bluetooth device, go to your primary speaker (the TX one) and, if the Bluetooth light is flashing, look for the ONFORU SK01 device in your Bluetooth device list and couple with it; if the Bluetooth light is not flashing, hold the Bluetooth button until it blinks to start pairing mode.
HOW TO EXTEND THE BATTERY LIFE OF BLUETOOTH SPEAKER
Your best bet is a portable power pack with quick charging capabilities. Quick charging can compensate for shorter battery life. This feature isn’t available on all speakers, but it’s highly beneficial because it can resuscitate a dead battery for a reasonable amount of time in half an hour or less.
HOW TO USE TWS MODE
Long press the “Power On” button on each speaker until you hear the confirmation message “Power on, your speaker is ready to pair.” Long press any of the speakers’ “Mode” buttons until you hear “Connected successfully.” In TWS mode, your speakers are now connected.
Frequently Asked Questions
-
What is the best way to tell if my Bluetooth speaker is completely charged?|
If the battery is fully charged, the CHARGE indicator will not light up. The CHARGE indicator may not light up while charging the speaker with the power turned on, depending on the model. The CHARGE indicator will light up if the battery is being charged when the speaker is switched off. -
Is it safe to leave a Bluetooth speaker on all the time?
The Bluetooth speaker can be left connected all day; however, the battery will be harmed. Charging the speaker all the time, even when the battery is fully charged, might cause the battery to overheat and explode. -
How long does a fully charged Bluetooth speaker last?
With a fully charged battery, Bluetooth speakers have an average battery life of 10-20 hours. Expect a 1000mAh Bluetooth speaker with a 10-hour playtime and a 3-hour charging time. The size of the battery in Bluetooth speakers varies, however they are usually between 1000 and 4000 mAH. -
What is the best way to connect my Onforu speaker?
To pair your Bluetooth device, go to your primary speaker (the TX one) and, if the Bluetooth light is flashing, look for the ONFORU SK01 device in your Bluetooth device list and couple with it; if the Bluetooth light is not flashing, hold the Bluetooth button until it blinks to start pairing mode. -
How long do I need to charge my Bluetooth speaker?
Speakers powered using AC mains power will take approximately 6-8 hours to completely charge. Speakers that are charged by USB take about 3-4 hours to fully charge. -
What happens if a Bluetooth speaker is overcharged?
No, once the charger and battery have reached equilibrium, the device will interrupt the charging circuit. -
Can I listen to music on my Bluetooth speaker while it charges?
Yes. It is possible to use your Bluetooth speaker while it is charging without causing damage to the battery. If you’re going to use the speaker for the first time, charge it to full capacity while it’s turned off so you can test the battery life. -
How can I make my Bluetooth speaker’s battery last longer?
Your best bet is a portable power pack with quick charging capabilities. Quick charging can compensate for shorter battery life. This feature isn’t available on all speakers, but it’s highly beneficial because it can resuscitate a dead battery for a reasonable amount of time in half an hour or less. -
What is the best way to care for a Bluetooth speaker?
One of the most important things to remember when cleaning your wireless Bluetooth speaker is to avoid using liquids. Liquids can enter the wireless Bluetooth speaker and cause harm to the internal components. A basic cloth can be used to wipe away dirt and other particles. -
Is it possible to change the battery in a Bluetooth speaker?
Turn the Bluetooth speaker upside down, pull off the anti-slip mat, locate the maintained screw, remove and unscrew it, and then heat and remove the battery from the audio motherboard with a soldering iron. Last but not least, new wires and plugs should be soldered together.