HYPERLITE CES-LS-VN-30W LED Flood Light User Manual

June 14, 2024
HYPERLITE

HYPERLITE LogoHYPERLITE CES LS VN-30W LED Flood Light USER MANUAL
LED FLOOD LIGHT
MARSseries

FEATURES & SPECIFICATIONS

HYPERLITE CES LS VN-30W LED Flood Light - FEATURES

The MARS series LED floodlight is designd to provide a cost-effective, energy- effificient solution for illuminating building facades, sign lighting, wall washing building exteriors, landscape lighting. MARS luminaires deliver a uniform, wide flood distribution.

HYPERLITE CES LS VN-30W LED Flood Light - FEATURES 1

UL CERTIFICATION
Certificate Number: E483348
Report Reference: E483348
Issue Date: 2017-DECEMBER-26
Additional Information:
See the UL Online Certifications Directory at www.ul.com/database
for additional information.
Only those products bearing the UL Certification Mark should be considered as being covered by UL’s Certification and Follow-Up Service.
Look for the UL Certification Mark on the product.
ORDERING INFORMATION
CES-LS-VN-100WXYZ-RMC
Example: CES-LS-VN-100W50120L12-KBZ

HYPERLITE CES LS VN-30W LED Flood Light - FEATURES 2

  • Kunckle Mount available for 30w, 50w, 70w and 100w only.
    ** Slipfitter Mount available for 100w, 150w, 200w, 240w only.

DIMENSIONS

HYPERLITE CES LS VN-30W LED Flood Light - DIMENSIONS

HYPERLITE CES LS VN-30W LED Flood Light - DIMENSIONS 1

INSTALLATION INSTRUCTIONS

READ THOROUGHLY BEFORE INSTALATION
WARNING! FIXTURES MUST BE GROUNDED and installed in accordance with the National Electrical Code and all local codes. Failure to do so may increase the RISK OF PERSONAL INJURY, PROPERTY DAMAGE, FIRE AND DEATH.
WARNING!
high voltage equipment should be observed when replacing light engine or otherwise servicing luminares. Disregarding this warning could result in electrical shock and possible injury to the individual installing or servicing this equipment. Installation, service and maintenance of luminaires should be done by a qualifified licensed electrician.
Dangerous voltage exist within the unit and all precautions usually observed in handling
CAUTION!
falling parts, cuts/abrasions, and other hazards please read all warnings and instructions included with and on the fixture box and all fixture labels.
To reduce the risk of death, personal injury or property damage from fire, electric shock,
NOTE!
– This equipment is only for professional installation. Non-professional personnel shall not remove or install the equipment.
– To avoid damage,falling,electric shock or fire, please do not modify the lamp or replace accessories without confirming with the supplier.
– Maintenance/installation and replacement the lamps , please confirm to cut off the power supply, and the lamps have set up a cooling. Please make sure the lamps properly installed before processing power.
– Ensure the accurate and reliable connection.
– Ensure that the product around the vent, the lamp cannot violate any fire prevention regulations when using.
Carefully read these instructions before installing product and keep it for future reference. If you do not understand these instructions, before starting any work, contact service@hi-hyperlite.com or 855-688-7879.
1/2 Knuckle Mount (Only available on 30w, 50w, 70w, 100w light)

  1. Open junction box and run wiring into box.
  2. Thread light body onto junction box using the 1/2-14 threads on knuckle
  3. Connect wiring.
  4. Adjust light head to desired angle and tighten Hexagon screw.

Trunnion Mount

  1. Loosen light head adjustment screws with hex key.
  2. Securely attach light to wall and connect wiring.
  3. Connect wiring.
  4. Rotate light head to desired angle and tighten adjustment screws.

HYPERLITE CES LS VN-30W LED Flood Light - INSTALLATION
1

U-bracket Mount

  1. Loosen light head adjustment screws with hex key.
  2. Securely attach light to wall and connect wiring.
  3. Adjust light head to desired angle and tighten Hexagon screw.

Slipfitter Mount (Only available on 100w, 150w, 200W and 250W light)

  1. Attach the slipfitter mounting kit onto the light head.
  2. Rotate light head to desired angle and tighten adjustment screw.
  3. Connect wiring.
  4. Securely attach light to pole/post.The maximum pole/post diameter is 2.36 in.

MORE PRODUCTS…

HYPERLITE CES LS VN-30W LED Flood Light -MORE PRODUCTS

www.hi-hyperlite.com
Use hyperlite LED flood light, enjoy brighter life now
If you need more information about our lights, please email us or call us
Email:service@hi-hyperlite.com
Toll-free number: +1(855) 688 7879

Documents / Resources

| HYPERLITE CES-LS-VN-30W LED Flood Light [pdf] User Manual
CES-LS-VN-30W LED Flood Light, CES-LS-VN-30W, LED Flood Light, Flood Light, Light
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals