BLAUPUNKT BSM701BT Bathroom Scale with Body Monitor Owner’s Manual

Owner’s Manual
BSM701BT Enjoy it.
Bathroom scales with body monitor Analytische

BSM701BT

IMPORTANT NOTES

• Before operating the appliance, please read the instruction manual and follow the instructions provided. The manufacturer is not liable for any damages resulting from use of the appliance contrary to its intended use or inappropriate use. Keep the instruction manual for future reference.
• The appliance is intended for home use only. Do not use for other purposes contrary to its intended use. Do not use for medical or commercial purposes.
• This appliance may be used by children of at least 8 years of age and by persons with reduced physical, and mental abilities and persons with no experience or knowledge of the equipment, if supervised or instructed on its safe use so that the risks associated with it were understandable. Children should not play with the appliance nor clean or carry out maintenance of the appliance unattended.
• The scale is a precision device. Do not drop, hit or shake it.
• If the scale is not used for a long time, remove the batteries.
• Batteries that are flat or out of use for a long time may leak.
• The appliance is not intended for people with a pacemaker or other medical implants. Tissue measurement is not recommended for pregnant women and people during dialysis.
• Before stepping on the scale, make sure the platform is dry.
• The scale can be slippery if its surface is wet.
• The scale must not be used near strong electromagnetic fields.

Conformity
Hereby, Blaupunkt Competence Center 2N-Everpol Sp. z o.o., declares that this equipment is in compliance with the essential requirement and other relevant provisions of Directive 2014/53/EU. Declaration of conformity can be obtained from the product page at www.blaupunkt.com.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. The used appliances should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose of this appliance in the common waste bin.
Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer), and polyethylene (bags, protective foam sheet). Your system consists of material that can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries, and old equipment.
**** Your products is designed a manufactured with high-quality materials and components, Cel which can be recycled and reused.
Technical data: Capacity up to 180kg, graduation 0,1 kg Power supply: 2 x 1,5V LRO3 batteries (AAA)

1. Display
   1 a. User number
   1 b. Sex
   1 c. Hydration
   ld. Fat % / Muscle % / Bones
   1 e. Obesity rate
   lf. Calories units
   lg Weight units
   Ih. Age
   1i. Height units

2. Scale platform

3. Buttons (SET, A, V)

REPLACING THE BATTERIES

1. Open the battery cover on the bottom of the device. Remove the used battery.
2. Insert a new battery paying attention to the proper polarity.

WEIGHT MEASUREMENT

Make sure the batteries are operational and inserted into the device. Place the scale on a flat, hard surface. Step on the scale. It will start automatically and calibrate, then it will indicate the result of the measurement. Wait for the result to stabilize, it will pulse for some time, then the scale will turn off automatically.

USER PROFILE SETTING

The scale has a memory for 12 user profiles.The range of height is from 100 to 250 cm, age from 10 to 100 years. The parameter selection process starts by pressing the SET button.The parameter value is changed by  buttons. Confirm and move to the next one by pressing the SET button:

1.  Profile number selection
2. Sex selection
3. Height
4. Age

When the last parameter has been confirmed, the scale will display 0.0 and then will automatically turn off. If the scale is on and displays 0.0, press the SET button for 3 seconds to enter settings.

WEIGHT MEASUREMENT WITH ANALYSIS

Start the scale by pressing the SET button. Select the user profile with buttons. Tread on the scale, the scale will display 0.0. Step on the scale. Wait for the measurement. When the measurement is complete, the scale will display the results three times: weight, % body fat along with the obesity scale, % hydration,% muscle tissue,% bone tissue, the recommended daily amount of calories.. Next, the scale will turn off automatically.

DISPLAYING THE LAST MEASUREMENT FOR A PROFILE

Start the scale by pressing the SET button. Select the user profile with buttons. Step on the scale or wait 6 seconds, the scale will display 0.0. Press the button to retrieve last measurements.To skip pages faster, use the buttons. The scale turns off automatically after displaying the measurements three times.

CHANGING THE UNITS

To change units from metric (kg) to imperial (lb, st) or vice versa, start the scale and find the units change button. Press the button to change units.

THE INSTALLATION OF THE MOBILE APP ON THE PHONE
Search for the BodyMonitor app in Google Play (for android phones) or AppStore (for iOS phones). Install the application. The following QR code will help to search for the right application.

http://onelink.to/a3n8un

THE FIRST STARTUP OF THE APP

Make sure that the Bluetooth function on your phone is active. Run the application. The application will start the Configuration Wizard.

1. Select the unit of weight and height and press “next”
2. Create your user profile. Insert your name and gender, set your date of birth, select your height and target weight, and specify your level of activity. Confirm saving the profile by pressing the floppy disk icon in the upper-right corner.
3. The application will search for compatible scales available in the area. Run the scales by pressing its platform. Select the scales from the list of devices. Confirm the selection. Assign a profile to a profile number in the scales (1 out of 12). Confirm.

WEIGHT MEASUREMENT WITH ANALYSIS WITH THE USE OF THE APP
Make sure that the Bluetooth function on your phone is active. Run the application. Stand on the scales on bare feet, touching the metal surfaces on the scale’s platform. The scales will start and calibrate and show the measurement result on the display. Wait a moment until the scales measure and analyze the resistance. The measurement result will be presented in the application.

ERROR MESSAGES

| Err —The scale has been overloaded.
---|---
Lo — Low battery, replace the batteries.
C —The scale requires recalibration, restart the scale.
ErrL – % of fat too low.
ErrH – % of fat to high.

If an error is displayed and the scale does not turn off automatically after a longer time, remove the batteries for more than 5 seconds.

CLEANING AND MAINTENANCE

Wipe the weighing platform with a damp cloth. Then wipe dry. Do not submerge in water or other liquids.

Competence Center
2N-Everpol Sp. z o.o. ul. Pulawska 403A 02-801 Warsaw, Poland phone: +48 22 331 99 59
e-mail: [email protected]
www.blaupunkt.com
In case of questions or problems please contact our service.
Tel. 00 48 22 331 99 54
E-mail:[email protected]
All rights reserved. All brand names are registered trademarks of their respective owners.
Specifications are subject to change without prior notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>