BLAUPUNKT AFT601 Tower Fan Owner’s Manual

: June 5, 2024
: Blaupunkt

Table of Contents

Effi ciency information
Important notes
- ASSEMBLY AND PREPARATION FOR WORK
- USE OFTHETOWER FAN
CLEANING AND MAINTENANCE
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

BLAUPUNKT AFT601 Tower Fan

Effi ciency information

AFT60

Descrip tion| Symbol| ValueF| Unit
Maxim um fan flow rate| F| 36,26| m3/min
Fan po werinput| p| 34,8| w
Service value| SV| 1,01| (m3/min)/W
Standb y power consumption| PSB| 0,308| w
Fan sou nd power level| LwA| 54,39| dB{A{
Maxim um air velocity| C| 2,72| meters/sec
Measur ement standard for service value| GB/T 13380-2007
Contac t details for obtaining more information| 2N-Everpol Sp. z o.o. ul. Pulawska 403A 02-801 Warsaw, Poland phone:+48223319959 e-mail: info@everpol.pl | www.blaupunkt.com

Important notes

Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.
This device is for domestic use only. Do not use for any other purposes.
The device should only be connected to an socket with values corresponding to the values on the rating label.
It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards.
Do not let cord hang over edge of counter, or touch any hot surface.
The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
Before maintenance work always disconnect the unit from the power supply.
When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord.
Damage to the power cord or plug can lead to an electrocution hazard.
Never leave the product connected to the power source without supervision.
Never put the power cable, the plug or the whole device into the water or any other liquids.
The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.
This equipment can be used by children aged 8 years and over under as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment.
Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.
Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
Never use the product close to combustibles.
Never expose the product to atmospheric conditions such as direct sun light or rain, etc … Never use the product in humid conditions (like bathroom or camping house).
The power cable should be periodically checked for damage.
If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising.
Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product by yourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it.
All the repairs should only be performed by authorized service professionals. Any attempted unauthorised repairs performed can be a hazard to the user.
Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
Do not block the airflow or cover the device.
Regularly clean the fan of dust so that dirt does not block the airflow.
Do not insert any objects between the machine’s protective grilles.
Do not use the fan in rooms with high humidity, such as bathrooms, etc. Do not place the fan in places where it could fall into a bathtub, wash basin or other water tank.

Device is compliant with EU directives:
– Low voltage directive (LVD)
– Electromagnetic compatibility (EMC)
Device marked CE mark on rating label

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance In the common waste bin.

Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box),polystyrene foam(buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.

Your products is designed a manufactured with high quality materials and components, which can be recycled and reused.

Technical data
Power:45W
Power supply: 220-240V~S0/60Hz

Control panel:
1 a. On/Off switch button
1 b. Speed setting button
1 c. Operation mode setting button
1 d. Oscillation button
1 e. Timer button
Display
Corps
Basis
Base fixing screw

ASSEMBLY AND PREPARATION FOR WORK

Join the two parts of the base.
Place the body on the base, pay attention to the position oft he power cord.
Screw the base to the body with the fastening screws.
Place the device in a convenient place.

USE OFTHETOWER FAN

Connect the device to a power source.
Start the fan with the switch.
Set the expected operating mode with the operating mode setting button:
– Normal mode : the fan will run at the set speed.
– Natural mode : the fan will simulate gusts of wind, cyclically change gusts every S seconds from fastest to smallest speed.
– Night mode : the fan will start at the fastest speed, after 30 minutes it will reduce the speed to medium, after another 30 minutes to the lowest and will continue to work until it is turned off or the operating mode is changed.
-Children mode : the fan will set the delayed off mode to 3 hours. The fan will start at the fastest speed, after 15 minutes will reduce the speed to medium, after another 15 minutes to the lowest.
Oscillation will start automatically, you can turn it off by pressing.
The airflow speed can be adjusted with the speed button.
With the timer button you can set the delayed switch off function in the range of 1 – 12 hours. Each press increases the value by 1. To turn off the timer, press the timer button again after setting the delayed switch off to 12 hours.
The oscillation function can be turned on and off with the oscillation button .

CLEANING AND MAINTENANCE

Before cleaning and maintenance, make sure that the fan has been disconnected from the power source.
The fan should be cleaned regularly. Body, posture should be wiped with a dry cloth. The interior should be blown out with compressed air or vacuumed with a vacuum cleaner.

Competence Center
2N-Everpol Sp. z o.o.
ul. Pulawska 403A
02-801 Warsaw, Poland
phone: +48 22 331 99 59
e-mail: info@everpol.pl
www.blaupunkt.com

W przypadku pytan lub problem6w
prosimy o kontakt z naszym serwisem.
In case of questions or problems
please contact our service.
Tel. 00 48 22 331 99 54
E-mail: sda@blaupunkt.pl