BLAUPUNKT HCO701 Convection heater Owner’s Manual
- June 5, 2024
- Blaupunkt
Table of Contents
BLAUPUNKT HCO701 Convection heater
IMPORTANT NOTES
-
Before using this device read the instruction manual and follow the instructions inside. The manufacturer is not liable for any damages caused by the misuse of this device due to inappropriate handling. Please keep this manual for future reference.
-
This device is for domestic use only. Do not use for any other purposes.
-
The device should only be connected to an socket with values corresponding to the values on the rating label.
-
It is necessary to check, if total current consumption of all devices plugged into the wall outlet does not exceed the fuse in the circuit.
-
If you are using an extension cord, make sure that the total power consumption of the equipment plugged into the extension cord does not exceed the extension cord power rating. Extension cords should be arranged in such a way as to avoid tripping hazards. Do not let cord hang over edge of counter, or touch any hot surface.
-
The device is not designed to be controlled via an external timer, separate remote control, or other equipment that can turn the device on automatically.
-
Before maintenance work always disconnect the unit from the power supply.
-
When unplugging the power cord from electrical outlet, hold it by the plug only and remove the plug carefully. Never pull the cable as it may cause damage to the plug or power cord.
-
Damage to the power cord or plug can lead to an electrocution hazard.
-
Never leave the product connected to the power source without supervision.
-
Never put the power cable, the plug or the whole device into the water or any other liquids. The device should be cleaned regularly complying with the recommendations described in the section on cleaning and maintenance.
-
Do not place the device near sources of heat, flame, an electric heating element or a hot oven. Do not place on any other device.
-
This equipment can be used by children aged 8 years and over as long as supervision is provided. People with reduced physical or mental capabilities, as well as people with no previous experience of using this equipment must be supervised and made aware of the risks. The instruction manual should be used as a reference for the safe use of this equipment. Children should not play with the equipment.
-
Children without ensured supervision should not be allowed to perform the cleaning and maintenance of equipment.
-
Children of less than 3 years should be kept away unless continuously supervised.
-
Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.
-
Additional precautions should be taken when using this device in the presence of children or pets. Do not allow children to play with the device.
-
Never use the product close to combustibles.
-
Never expose the product to atmospheric conditions such as direct sun light or rain, etc. .. Never use the product in humid conditions (like bathroom or camping house).
-
The power cable should be periodically checked for damage.
-
If the power cable is damaged the product should be taken to a professional service location to be fixed or replaced to prevent any hazards from arising. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product byyourself as it can lead to electric shock. Always return the damaged device to a professional service in order to repair it. All the repairs should only be performed by authorized service professionals. Any attempted unauthorized repairs performed can be a hazard to the user.
-
Only Original accessories should be used, as well as accessories recommended by the manufacturer. Using accessories which are not recommended by the manufacturer may result in damage of the device and may render the device unsafe for use.
-
Notice: Do not cover the device or obstruct air inlets or outlets of the heater.
-
Do not use in rooms below 6m2
-
Do not use in areas with increased humidity, bathrooms, showers etc.
-
Remember to maintain a 50 cm distance from furniture, curtains or other objects when using the heater.
-
Always turn the thermostat controller to minimum and switch the heater off before unplugging the device.
-
WARNING: Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.
-
· Do not insert objects through the safety grill or the air inlets.
· This product is only suitable for well-insulated spaces or occasional use. -
Do not place the radiator directly under the power socket.
-
During the first use, a smell of burning might emerge within the first few minutes. This is a normal occurrence, and should quickly disappear.
Device is compliant with EU directives:
- Low voltage directive (LVD)
- Electromagnetic compatibility (EMC) Device marked CE mark on rating label
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Used appliance should be delivered to the dedicated collecting points due to hazardous components, which may affect the environment. Do not dispose this appliance In the common waste bin.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the
packaging easy to separate into three materials: cardboard (box), polystyrene
foam (buffer) and poly ethylene (bags, protective foam sheet). Your system
consists of material which can be recycled and reused if disassembled by a
specialized company. Please observe the local regulations regarding the
disposal of packaging materials, exhausted batteries and old equipment.
Your products is designed a manufactured with high quality materials and
components, which can be recycled and reused.
TECHNICAL DATA
Voltage: 220-240V-50Hz
Power: 2000W
PRODUCT OVERVIEW
- Handle
- Body
- Control panel
- Power button
- Power-/operating-mode selection button
- Temperature-setting button
- Timer button
- “-” Button
- “+” Button
- Main power switch
- Remote control
- Remote-control-storage compartment
- Feet
BEFORETHE FIRST USE
Screw the feet into the heater body, as shown in the Figure.
Place the heater on a level, stable, and heat-resistant surface.
USING THE APPLIANCE
Connect the radiator to the power source. Switch the appliance on with the
main power switch (D J. After that, two buttons on the control panel light up:
the timer and the power switch. The appliance will then be in the standby
mode.
Press the power switch to turn on the radiator.
The radiator switches on in the Eco mode, and the target temperature is set at
23°C.
Temperature changing: Press the temperature-setting button, then press the+ or
– buttons to change to the required temperature. After setting to the required
temperature, the radiator will switch to the Eco mode. The temperature can be
set within the range 10-30°C and in the anti-freeze mode at 5°C. Note: the
temperature value on the display shows the set required temperature. This is
not an ambienttemperature measurement.
Changing the operating mode:To change the heating mode, press the operating-
mode-selection button:
The eco mode -> High power -> Medium power -> Low power. In the eco mode, the
radiator adjusts the power to the ambient temperature. When one of the
constant-power modes is used, the appliance will only operate at the selected
power level. When the selected target temperature (default 23°C) is reached,
it will switch off. When the temperature drops, the appliance will start
heating again.
The eco mode: To activate the eco mode, press the operating-mode button until
the eco mode is selected.
In this mode, the radiator adjusts the heating power to the ambient
temperature. The smaller the difference between the required temperature and
the ambient temperature the lower the power used to heat the room. If there is
only one degree of difference, the radiator will operate in the low-power
mode. When the difference is 3 degrees, the radiator will use the maximum
power.
The radiator’s delayed-switch-on function: The radiator should be in the
standby mode. Press the timer button. The hour symbol (HJ and the time (OJ
will appear on the display. Use the+ or – buttons to select the expected
switch-on-delay time of the radiator. In the range Oto 5 hours, the increase
is 0.5 hours, while above 5 hours to 24 hours the increase is 1 hour. After
the selected time has elapsed, the appliance will start heating.
After setting the timer, you can set the radiator operating parameters by
using the temperaturesetting button or the operating-mode-selection button.
CAUTION: It is worth remembering that when using the radiator’s delayed-
switch-on function, the appliance can switch on when left unattended. Always
observe all the safety instructions for the product’s use.
The radiator’s delayed-switch-off function:When the radiator is operating in
one of the operating modes, press the timer button. The hour symbol (HJ and
the time (OJ will appear on the display. Use the +or – buttons to select the
expected switch-off-delay time of the radiator. In the range Oto 5 hours, the
increase is 0.5 hours, while above 5 hours to 24 hours the increase is 1 hour.
After the selected time has elapsed, the appliance enters the standby mode.
Deactivating the audible signals when pressing the buttons: To deactivate the
audible signals each time you press the control buttons, press and hold the+
and – buttons at the same time for 3 seconds. To deactivate this function,
press and hold the+ and- buttons at the same time again for 3 seconds. Remote
control: The buttons on the remote control correspond to the control panel’s
buttons, and perform the same functions.
OVERHEATING PROTECTION
The radiator is protected with overheating protection which automatically switches off the appliance if it intensely overheats. In that event, disconnect the appliance from the mains, wait approx. 30 minutes for the radiator to cool down, and rectify any possible cause of the overheating, e.g., something covering the radiator. Check the appliance, cable, and plug for damage. If no damage is observed, reconnect the appliance and switch it on, according to the manual. If the radiator does not switch on, contact the customer service for assistance.
CLEANING AND MAINTENANCE
During use, clean the appliance regularly according to the following instructions.
- Disconnect the appliance from the power source, and let it cool down before cleaning.
- Gently clean the appliance’s external surface and control panel with a damp and lint-free cloth.
- lf there is dust in the appliance’s slots, it is recommended to blow it out with a vacuum cleaner or blower.
- Do not use strong detergents, chemical cleaners, or solvents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>