PowerA 34233744 Enhanced Wired Controller User Manual
- June 5, 2024
- PowerA
Table of Contents
ENHANCED WIRED
CONTROLLER
USER MANUAL
NINTENDO
SWITCH™
CONTENTS
- Enhanced Wired Controller for Nintendo Switch™
- Detachable 10ft (3m) USB Cable
- User Manual
SET UP
- Make sure your Nintendo Switch system is powered on and connected to your TV.
- Insert the USB cable into a USB port on the Nintendo Switch dock. Connect the other end of the cable to the wired controller. Your wired controller is now ready for use.
BASIC USAGE
Connect multiple wired controllers to the Nintendo Switch console at a time.
On-screen notifications will indicate which USB channel each controller is
connected to.
ASSIGNING ADVANCED GAMING BUTTONS
- Press and hold the Program Button for 2-3 seconds on the back of the controller. The program LED indicator will flash, signaling the controller is in assign mode.
- Press one of the following buttons (A/B/X/Y/L/R/ZL/ZR/Left Stick Press/Right Stick Press/+Control Button) to re-assign. Then press the Advanced Gaming Button AGR or AGL) that you wish to assign. The Program LED indicator will stop flashing, signaling the Advanced Gaming button has been set.
- Repeat for the remaining Advanced Gaming Button.
NOTE: Advanced Gaming Button assignments will remain in memory even after your controller is disconnected.
RESETTING ADVANCED GAMING BUTTONS
- Hold the Program Button down for 2-3 seconds. The LED Connection Indicator will slowly flash, signaling the controller is in Program Mode.
- Press and hold the Assign Program Button for 5 seconds to reset.
TROUBLESHOOTING
Q1. Why isn’t my controller connecting to my Nintendo Switch console?
A1. Confirm that the USB cable is securely connected to the Wired Controller
and the Nintendo Switch dock.
A2. Confirm that the Nintendo Switch is powered on and connected to an
external display before connecting your wired controller.
A3. Confirm that your Nintendo Switch has the latest SystemUpdate installed.
Q2. Why don’t I feel any vibration when using this controllerA1. This product
does not support vibration functionality.
MOTION WARNING
Playing video games can make your muscles, joints, skin or eyes hurt. Follow
these instructions to avoid problems such as tendinitis, carpal tunnel
syndrome, skin irritation or eyestrain:
- Avoid excessive play. Take a 10 to 15-minute break every hour, even if you don’t think you need it. Parents should monitor their children for appropriate play.
- If your hands, wrists, arms or eyes become tired or sore while playing, or if you feel symptoms such as tingling, numbness, burning or stiffness, stop and rest for several hours before playing again.
- If you continue to have any of the above symptoms or other discomforts during or after play, stop playing and see a doctor.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
WARNING: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for Class B digital devices, pursuant to Part 15 of the FCC Rules.
CAN ICES-003(B)/NMB-003(B)
This device contains license-exempt transmitter(s)/ receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference;
- This device must accept any interference, including interference that may cause undesired operation of the device
MANUFACTURED BY
ACCO Brands USA LLC, 4 Corporate Way, Lake Zurich, IL 60047
ACCOBRANDS.com | POWERA.com |
MADE IN CHINA
CONTACT/SUPPORT
For support with your authentic PowerA accessories, please visit
PowerA.com/Support.
WARRANTY
2-Year Limited Warranty: Visit
PowerA.com/support for details.
AUSTRALIAN WARRANTY STATEMENT
This product comes with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If purchased within Australia or New Zealand, this product comes with a One-year warranty from date of purchase. Defects in the product must have appeared within one year from the date of purchase, in order to claim the warranty. All warranty claims must be facilitated back through the retailer of purchase in accordance with the retailer’s return policies and procedures. Any expenses incurred, as a result of returning the product to the retailer of purchase are the full responsibility of the consumer.
AU WHOLESALE DISTRIBUTOR
Level 2, 2 Darling Street South Yarra, Australia VIC 3141
bluemouth.com.au.
Email: support@bluemouth.com.au
+61 (3) 9867 2666
ADDITIONAL LEGAL
© 2021 ACCO Brands USA LLC. PowerA and PowerA Logo are trademarks of ACCO
Brands Corporation. Nintendo Switch is a trademark of Nintendo. Licensed by
Nintendo. All rights reserved. All other trademarks are the property of their
respective owners.
REGIONAL COMPLIANCE SYMBOLS
More information is available via web-search of each symbol name.
The WEEE (Waste of electrical and electronic equipment) symbol requires battery disposal outside of other household waste per local regulations. Contact your city office, waste disposal service, or retailer for guidance.
The CE (Conformité Européene aka European Conformity) mark is a declaration from the manufacturer that the product meets applicable European Directives and Regulations for health, safety, and environmental protection.
The UKCA (UK Conformity Assessment) mark is a declaration from the manufacturer that the product meets applicable UK Regulations for health, safety, and environmental protection.
The Regulatory Compliance Mark is a visible indication of a product’s compliance with all applicable ACMA (Australian Communications and Media Authority) regulatory arrangements, including all technical and record-keeping requirements regarding the electrical safety and/or electromagnetic compatibility (EMC).
DECLARATION OF CONFORMITY
Hereby, ACCO Brands USA LLC at 4 Corporate Way, Lake Zurich, IL 60047 USA declares that this wired controller is in compliance with Directive 2014/30/EU. The full text of the EU Declaration of Conformity is available at the following internet address: PowerA.com/compliance
Customer Service
PowerA.com/Support
TWO-YEAR LIMITED WARRANTY
For warranty details or support with your authentic PowerA accessories, please visit PowerA.com/Support.
References
- ACCO Brands
- BDA - The Modern Merchandise Agency for Iconic Brands
- bluemouth.com.au
- PowerA | PowerA
- PowerA | PowerA
- Declaration of Conformity | PowerA
- Support | PowerA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>