Shenzhen HRM828 Heart Rate Monitor User Manual
- June 5, 2024
- Shenzhen
Table of Contents
USER MANUAL
BLE & ANT
Heart Rate Monitor
Product Introduction
Thank you for purchasing this product, this is a heart rate monitor with
wireless Bluetooth and ANT+ functions, it can transmit heart rate data to your
receiving device and sports health App in real-time via Bluetooth or ANT+ so
that you can manage your exercise more scientifically. And the IP67 waterproof
can effectively prevent sweat from the device during exercise. This manual can
guide you on how to use the product, please keep it for reference.
(Notice: This product is for sports purposes only and it is not meant to
replace any medical devices.)
Basic Parameters
Connectivity: BLE(25 meters), ANT+(10 meters)
Battery Life: Last 50 hours after being fully charged
LED: Display different colors in different heart rate zones
Heart Rate Alarm: Audible alarm(off by default)
Data Storage: 13 hours(one value every 2 seconds)
Dimension: 59.5x27x10.4mm
Host weight: 12g
Waterproof: IP67
Operating Temperature: 5℃~40℃
Product Accessories
How to use
Notice: When the heart rate monitor is not worn, it will be off and enter
sleep mode and cannot be searched. Once the heart rate monitor is worn
correctly, it will be automatically turned on and work.
Wearing
-
Moisten the electrode areas of the chest strap.
-
Attach the connector to the chest strap, pay attention to distinguish the left and right.
-
Adjust the strap length to fit tightly but comfortably, make sure that the moist electrode areas are firmly against your skin, pay attention to distinguish the left and right position(L towards left, R towards right). (As the figure show)
Heart Rate Zone LED Color
Once the heart rate monitor is worn correctly, it will be automatically turned on and the LED will flashes white (Heart rate alarm function is turned on: When the device is turned on, it will not beep. Heart rate alarm function is turned off: When the device is turned on, it will beep). When the heart rate is detected, the LED will display different colors according to the heart rate zones, as the table shown below:
| Zone | Color | Zone(Default) |
|---|---|---|
| Zone 1 | White | Below 60%MHR |
| Zone 2 | Blue | 61%~70% MHR |
| Zone 3 | Green | 71%~80% MHR |
| Zone 4 | Orange | 81% ~ 90% MHR |
| Zone 5 | Red | Above 91% MHR |
- Max Heart Rate Value(MHR)=180bpm(Default)
Heart Rate Alarm
When the heart rate is higher than the alarm value, the device will beep. By
default, the alarm mode is turned off and can be turned on through the App
settings.
Charging
- For the first time using the device, it may need to be charged before it can be turned on.
- Please use DC 5V power adapter to charge the device.
- The LED shows red during charging, shows green after fully charged.
Compatible with multiple Apps
MooFit / Endomondo / Sports Tracker / Runtastic / Wahoo Fitness
Applicable Models ：
| IOS7.0 or above, iPhone 4s and above models
---|---
| Android 4.3 and above, with Bluetooth 4.0
Responsibility Disclaimer
- The information contained in this manual is just for reference. The product described above may be subject to alteration owing to the manufacturer’s continuing research and development plans, without making an announcement in advance.
- We shall not bear any legal responsibility for any direct or indirect, accidental or special damages, losses, and expenses arising from or in connection with this manual or the contained product. advance.
FCC Statement
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
V0.7
Documents / Resources
|
Shenzhen HRM828 Heart Rate
Monitor
[pdf] User Manual
HRM828 Heart Rate Monitor, Heart Rate Monitor, Rate Monitor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>