SHENZHEN E-BESTA ENTERPRISES CO LTD ISB13 Bluetooth Speaker User Manual
- October 30, 2023
- SHENZHEN E-BESTA ENTERPRISES CO LTD
Table of Contents
SHENZHEN E-BESTA ENTERPRISES CO LTD ISB13 Bluetooth Speaker
Product Information
- Product Name: Bluetooth speaker
- Model: ISB13
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Product Usage Instructions
- Turn on your Bluetooth speaker by pressing and holding the power button until the LED light turns on.
- Make sure that your Bluetooth-enabled device is turned on and in range of the speaker.
- On your device, go to the Bluetooth settings and search for available devices.
- Select the ISB13 from the list of available devices.
- Once connected, you can play music or other audio from your device through the speaker.
- Adjust the volume and other settings using the controls on your device or on the speaker itself.
- When you’re finished using the speaker, turn it off by pressing and holding the power button until the LED light turns off.
Note: Do not modify or make any changes to the speaker as it may void your authority to operate the equipment.
Product Name ： Bluetooth speaker
Model ： ISB13
Function description
- (MODE )Press to change source modes to blue tooth, USB, or micro SD/TF
- ( △play button) Press to play or pause music tracks. Press and hold for 3s to disconnect blue tooth device and enter pairing mode.
- (-button) Press to decrease the volume level. Press and hold to play the previous track.
- (+button) Press to increase the volume level. Press and hold to play the next track.
- (Light button) Press repeatedly to cycle through LED light settings. Press and hold for 5s to turn the voice prompt on/off.
- (TF card port) supports TFCARD/Micro SDCARD and can play music in the card.
- (USB port) supports USB and can play music in USB.
- (DC 5V) when the DC 5V cable is plugged in, the LED lights up.
(Bluetooth connection)
- When powered on, the speaker will enter blue tooth mode automatically. If you are playing from a different source, press the mode button to select blue tooth mode.
- Open your device in BT mode, search for new devices and select ISB13. Refer to the manual for your specific device for instructions on pairing and connecting blue tooth devices.
- After the device is successfully paired, a voice prompt will announce the connection.
- Use the controls on the connected device to select and begin playing audio. Use the controls on the speaker or the connected device to play, pause, and adjust the volume.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>