iBoard TE-DS-215 Intelligent Display Automatic Sterilizer User Manual

iBoard TE-DS-215 Intelligent Display Automatic Sterilizer User Manual

Product Model:TE-DS-215 (WAD)

1. Product Dimensions Picture

2. Display parameters

3. Hardware Configuration

4. Disinfection machine configuration

5. Electronic data

6. Packing List

7. Packing information

8. Caution

1. Make sure that the socket used is well grounded and connected to the power source away from high-power equipment.
2. Keep the power supply stable, and do grounding protection to avoid lightning strikes.
3. Do not squeeze the touch area of the whole machine shell or cabinet shell
4. Non-professionals are forbidden to touch the internal circuit of the whole machine to avoid electric shock or damage to the circuit.
5. Avoid using or storing in strong magnetic, high temperature, high humidity, high acid / alkali / salt environments.
6. Keep away from flammable materials, gas and dust.

9. FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

10. Installation and Operation:

10.1. the installation of the equipment is the United States standard power cable, directly plug in the power supply, to switch on. The equipment will automatically boot into the system.

Figure 1

10.2 WIFI network connection:
Click the settings icon to enter the settings option, click the “WLAN” option to open the right button, select the WIFI, to connect to enter the corresponding password to connect to use.

10.3. Ethernet connection:
Plug the Ethernet cable into the RJ45 port on the device, click on the “more” option in the setting to enter the setting Ethernet mode, and automatically connect to the external network after opening the Ethernet.

10.4 APK installation:
Insert the U disk above the device USB1 or USB2, click on the main menu “Explorer” to select “removable disk “, click USB_DISK0” to select the APK installation to install. When installing water sprinkler, open the front panel and put the water bottle down. , close the front panel, as shown in figure 1 below.

10.5 Water sprinkler Part

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>