SUNMI FM020 Face Sense Camera User Guide

Face Sense Camera
User Guide

Package Item List

Face Sense Camera, power adaptor, user guide, mounting bracket, sticker, and screws.

Device Illustration

Illustration on the Status Indicator

.
Blue On| Connected/Normal
---|---
Blue Blinks| The camera is connected for video playback
Green Blinks| Network error/
waiting for being connected and configurated
Green On| The device has been reset/is rebooting
Red Blinks| The device software is being upgraded

Basic Specs

Download APP

Before using the device, please complete user registration by downloading SUNMI Assi by searching on Tencent Appstore/SUNMI App Store or scanning the QR code below.

https://webapi.wap.sunmi.com/webapi/wap/web/appstore/1.0/?service=AppStore.getAppFromAbroad

Configure Software

1. After downloading SUNMI Assistant, please register and log in, and click “Device” on the page bottom.

2. Click “Add a Device”, and select Face Sense Camera.

3. Please follow the tips on the APP to complete device network setting.

4. Please install the device following the “Installation Guide”. After installation, please proceed the above step to the image adjustment or click “Image Adjustment” in IPC Settings page of the App to position the store doorsill (this step is essential to count customer visits. Please be careful when positioning the store doorsill to ensure the data accuracy).
a) Ask a helper to stand on the central point of the doorsill, and click the “Image Adjustment” in the App to enter into the page for face focusing. Please follow the instruction on the page, and drag the facial recognition box to fit the face in it (you can click the +, — on the screen to slightly adjust the focal length).
b) Click “Next” to move on to the page for line positioning. Please click the two bottom ends of the doorsill on the image to position the line (supposing the actual door width equals to the line length on the image).

Move the bottom two ends to keep the line as wide as the door frame.
5. Log in to https://store.sunmi.com through a computer browser to check more IPC settings and use more SUNMI application services.

Installation Guide

This device can be wall-mounted or installed on a ceiling according to the store layout.

1. Insert a TF card (required A TF card needs to be purchased separately.) Please gently insert the TF card to the end of the slot following the direction indicated.
2. Find the right place to install it (take ceiling installation as an example) The camera should be installed on the central axis of the store entrance/exit (and the distance between the camera and the entrance/exit should be 1.7-3.5m) to ensure the data accuracy. The installation height of a camera should be 2.2-2.9m, and the optimal angle between an inclined camera and the vertical line is 10°. You can adjust the angle according to the monitoring image, but an angle within 15° is recommended.
3. Fix the bracket Stick the screw positioning label on the place you chose following the above instructions, and punch an initial hole according to the label and fill in a plastic expansion tube. Fix the bracket in place on the ceiling with tapping screws.

4. Install the camera Screw the camera and the base in place, and connect cables including the power cable and network cable.

Applicable scenarios
This device is an IP camera that is applicable in business scenarios, which include:
1. Monitor the whole store and send notifications on sound or image anomalies for security purposes.
2. Monitor the cashier counter and combine it with order data and images to realize checkout auditing.
3. Display customer visit data in multiple dimensions to better support store operation.
Regulatory Information
FCC Information
Please take attention that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help
FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
I. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
EU Conformity Statement
This product and – if applicable – the supplied accessories too are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2 014/3 0/EU. the Rol-IS Directive 2 011/6 5/EU.
LEGAL INFORMATION ABOUT INTELLECTUAL PROPERTY
All companies. product and service names mentioned herein are trademarks, registered trademarks, or service marks of their respective owners. Shanghai Sunmi Technology Co., Ltd. reserves the right to revise the content of this document at any time without prior notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in a retrieval system, or translated into any language in any form without prior written permission of Shanghai Sunmi Technology Co., Ltd. Hereby, Shanghai Sunmi Technology Co., Ltd. declares that the Face Sense Camera is in compliance with the RED Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.sunmi.com.
IPC FS 128g
160*160mm
Table of Toxic and Hazardous Substances and Content in the Product

( Pb ) ( Hg ) ( Cd ) ( Cr) (VI) ) ( PBB ) ( PBDE )
Circuit board
component| x O        O        O         O           O            O
Case component| O          O         O            O           O          O

This table is made in accordance with SJ/T11364.
O： This symbol indicates that the content of this toxic or hazardous substance in all homogeneous material is under the limit specified in the GB/T26572.
X： This symbol indicates that the content of this toxic or hazardous substance in at least one homogeneous material exceeds the limit specified in the GB/T26572.

The “environment-friendly use period” of the device is 10 years, which is shown in the figure below. Parts that can be replaced, for example, the charger, have different environment-friendly use periods. The environment- friendly use period can only be an effective period when the device is used in the normal conditions stated in this user guide.

Manufacturer: Shanghai SUNMI Technology, Co., Ltd.
Address: Room 605, Block 7, KIC Plaza, No.388 Song Hu Road Yang Pu District, Shanghai, China.

References

• SUNMI - BIoT for Business 4.0
• SUNMI STORE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>