SERVER 07794 Express Replacement Pump User Guide
- June 5, 2024
- SERVER
Table of Contents
SERVER 07794 Express Replacement Pump
Tips and tricks to help you get started with your new Server Express
pump
- Remove unit from box. Wash, rinse, sanitize, and air dry pump parts properly before use.
- Squeeze pinch valve open to ensure it isn’t stuck shut, then insert into pump housing.
- Press dome into housing fully and wrap loop around lower opening to secure.
- Lubricate with a small amount of clean water and install tube by rotating until both pegs on housing fit into holes on tube.
- Lubricate with water and install connector by rotating until both pegs on connector fit into holes on tube.
- Insert discharge fitting into discharge tube. Place loop of fitting around peg on end of discharge tube.
- Fully assembled pump.
WANT TO LEARN MORE
Visit server-products.com/manual-more for your manual, part breakdown, support videos and more. spsales
@server-products.com | 800.558.8722
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>