Yaber E1 720P Projector User Manual

Yaber E1 720P Projector

Product Information

The Yaber E1 Projector is a high-quality projector that offers a native resolution of 1280*720p and an aspect ratio of 4:3/16:9. It utilizes LCD display technology and an LED light source, providing clear and vibrant images. The projector has a color gamut of 45% NTSC and weighs 2.43 lbs, making it portable and easy to carry around. It features multiple output ports, including HDMI and USB, allowing for easy connectivity with various devices. The projector operates on a power voltage of AC100-240V~50/60Hz and has a projection method of front/rear on the desk. It supports various video and audio formats, making it suitable for a wide range of media playback.

Product Usage Instructions

1. Ensure proper ventilation: The projector is equipped with a ventilation system to ensure stable operation. Avoid covering the vent with cloth or other materials, as it may cause overheating.
2. Avoid strong impact and vibration: Protect the projector from strong impact, extrusion, and vibration, as it may lead to internal circuit faults. Do not attempt to move the projector during operation.
3. Clean the lens: The lens is a critical component that directly affects image quality. Use a soft cotton cloth to wipe the lens surface and remove any dust. Do not use hard cloth or abrasives.
4. Connect power and devices: Insert the power cord into the power cord port. Connect external devices using the HDMI and USB ports.
5. Adjust focus: Use the manual focus buttons (manual focus andmanual focus+) to adjust the focus and obtain the clearest image.
6. Prevent overheating: Clean the detachable dust filter toprevent the projector from overheating. If the screen has a black spot, clean the dust from the filter.
7. Mounting options: The projector features a projector mount hole, allowing for easy mounting on a compatible mount or tripod.

For any issues or questions regarding the Yaber E1 Projector, please contact Yaber’s Lifetime Professional Support by emailing your order number and problem to [email protected]. They guarantee a fast solution within 24 hours and are committed to providing satisfactory customer service.

YABER Lifetime Professional Support

Dear customer,

Thank you very much for supporting YABER.
Please read this manual thoroughly before using the projector. If you have any issues, email your order number and the problem to [email protected]. We will provide a fast solution in 24 hours.
Actually, many problems can be easily solved by setting, such as no signal, no sound, Bluetooth connection failed, WiFi connection failed, choppy animation etc. We promise all the projectors have been 100% carefully checked and packaged before shipping.
If you have any questions, could you please contact us so that the problem can been solved. And give us an opportunity to improve. We guarantee we will provide you a satisfactory solution.
Thanks for your understanding!

Best regards

• YABER Service Team

TIPS

1. Do not place projector in too warm or too cold room, because the high temperature or low temperature will shorten lifespan of the device. The working environment would be 5°C~35°C better.
2. The ventilation is equipped for the projector to work stably. Don’t cover the vent with cloth, blanket or other things. Don’t insert anything into the slit of the projector, or it may produce a short circuit or an electric shock to your device and cause damage.
3. The projector shall be strictly protected from strong impact, extrusion and vibration. Do not try to move and on strong impact, extrusion and vibration. Do not try to move and the internal circuit faults.
4. Lens, as the core component of the projector, is directly related to the picture definition and effect. The excessive dust thereon will affect image quality. The dirty lens shall be wiped with soft cotton cloth for the glass lens surface. Hard cloth or abrasives shall not be used.

PACKAGE LIST

PROJECTOR SPECIFICATIONS

Model No. E1

Native Resolution| 1280*720p| Aspect Ratio| 4:3/16:9
Display Tech| LCD| Light Source| LED
Color Gamut| 45% NTSC| Size| 6.3×4.92×5.12 inch
Weight| 2.43 lbs| Power Voltage| AC100 240V~50/60Hz
Output Port| Headphone| Input Port| HDMI/USB
Projection Method| Front/Rear on Desk
Operation Mode| Remote control
Video Format| AVI/MP4/MKV/FLV/WMV/MOV/RMVB/MPEG1/MPEG2/MPEG 4/H.264/XVID/H.263/JPEG
Audio Format| AAC/MP2/MP3/PCM/FLAC/WMA
Image Format| JPG/JEPG/BMP/PNG

PROJECTOR OVERVIEW

1

| ****

Projector lens

| ****

Optical coated glass lens

---|---|---

2/7

| ****

IR window

| ****

Infrared signal receiver

3

| ****

Power Cord Port

| ****

Insert the power cord

4

| ****

Headphone Jack

| ****

3.5mm Headphone Output

5

| ****

HDMI Port

| ****

HDMI input

6

| ****

USB Ports

| ****

USB 1 port / USB 2 port

8

| ****

Detachable Dust Filter

| Clean the dust (if the screen has a black spot)

9

| ****

Vent

| Prevent the projector from overheating

10

| ****

Manual focus

| ****

Adjust it and get the clearest image

11

| ****

Power button

| ****

Turn on/off the power

12

| ****

Manual focus+

| ****

Adjust it and get the clearest image

13

| ****

Projector Mount Hole

| Fix the projector with a tripod (1/4 inch screw)

14

| ****

Bottom label

| Nameplate on the bottom of the projector

REMOTE CONTROL

Note

1. Install 2 pieces of AAA batteries into the remote before using it. Do not combine new batteries with old ones in remote controller, which can cause operation failure due to insufficient power supply.
2. When using the remote controller, please make sure that the signal transmitter of the remote controller aims at infrared signal receiver of the projector.
3. If you are not using the remote controller for an extended period, please take out batteries to prevent batteries leakage.

INSTALLATION

Installation Method

The projector can be placed on the stable desk to project the image like following methods:

Projection Distance and Size

Aspect Ratio: 16:9

Distance (ft.)| Screen Size
4.4| 45″
5.9| 60″
7.5| 80″
9.8| 100″

• The recommended projection distance is about 5.9ft.
• The image size depends on the distance between projector and screen, there may be 3% deviation among above listed data. Different settings cause various distances.

STARTING PROJECTOR

• Turn on the projector: Connect to the power cable, when the red indicator light is on, press the power button on the panel ( Press the power key on the remote control ) to start the projector, the indicator turns from the red to blue, the projector is on.
• Turn off the projector: When the projector is working normally, press the power button, the indicator turns from the blue to red, the projector is in shut down.

IMAGE ADJUSTMENT

Electric Focus Adjustment

• Place the projector lens perpendicularly to the projection screen or curtain wall, and press the F+/F- key on the remote control or the projector panel, until the image is clear, that means the image focusing is finished.

Note: If it is still blurry, please try to adjust the projection distance.

SETTING UP THE PROJECTOR

The projector’s home page is as follow.

Select The Input Signal Source

• Select the desired input signal source (USB/ HDMI) on the home-page.

Note: If you connect the external device ( Such as TV box, Fire TV Stick, DVD Player, USB flash disk, Computer ect.) , please must select the corresponding signal source. If you choose wrong, the projector will show no signal.

Multimedia Play

USB Disk Input Mode

• Step1: Insert the USB flash disk into the USB port of the projector.
• Step2: Select “Media” and the press the “OK” key to enter.
• Step3: Depending on the file type, select the option [MOVIE/MUSIC/PHOTO/TEXT]
• Step4: Select the desired file in the USB disk (or enter the sub-folder folder), and then press the [OK] button to play it.

Warm Tips: If the projector cannot recognize the USB disk, please refer to the following methods to solve the problem.

Please confirm whether your USB disk meets the following formats.

1. FAT32: 8G/16G/32G
2. NTFS: 64G

If it is not, please format the USB disk. Before you format the USB disk, if you have anything on your USB disk, make sure to backup everything. After these steps, everything will be lost forever.

How to convert USB disk format to FAT32 format?

1. Plug-in your usb disk into the computer’s USB port.
2. 2. Open up File Explorer and right-click on the drive.
3. 3. Choose Format.
4. 4. In the File System dropdown, please choose the FAT32 format.
5. Click Start and close this window when finished.

If the problem is still not solved, please send your problem to this email: [email protected]

Play Interface

• Click the “OK” button to get the play interface.

WiFi Setting

Wireless Connection

Warm Tips

1. The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring.
2. Make sure your mobile device is close to the projector when using wireless connection. A distance within 1 meter is recommended.
3. Some mobile devices may not support screen mirroring due to the compatibility.
4. Any questions, please feel free to contact us via [email protected]

iOS Cast ( for iOS Devices )

1. Go to home page — Select the [Setting] menu — Select the [WiFi] menu — Select your home WiFi from the list — Connect the E1 projector to your home WiFi.
2. Back to home page — Select [ Airplay ] menu — Press the OK button to enter the [ Airplay ] menu.
3. Select the [Settings] menu on your iOS device — Turn on the [Wi-Fi] function — Connect your iOS device to the same home network as the projector.
4. Open the [ Control Center ] on your iOS device — Select the [ Screen Mirroring ] function — Select and connect the iOS Cast receiver named [ E1-Airplay-XXXX ] — your iOS device screen will be displayed on the projection screen after 3 seconds.

Miracast ( for Android Devices )

1. Go to home page — Select the [ Miracast ] — Press the OK button to enter the Miracast setting menu.
2. Select the [ Settings ] menu on your Android device — Select the [ Screen mirroring ] function — Select your Miracast receiver named [ E1-Miracast-XXXX ] — your Android device screen will be displayed on the projection screen after 3 seconds.
3. On your Android device, tap [Settings] -[ WLAN Display ] -Turn [ Wi-Fi ] ON, Connect your home WiFi.

Note

1. Different brands of Android phones have different operations for select Screen Mirroring Display, please refer to your phone’s manual. [ Multi screen/Wireless display/WLAN display/Screen mirroring/Wireless projection/Smart view etc. ]
2. Not all Android phones support this function. Please make sure it is supported before use.

Bluetooth Setting

• Go to home page — Select [ Setting ] — Select the [ Bluetooth ] . Enter the Bluetooth settings interface– Scan the Bluetooth devices nearby automatically– Choose the Bluetooth device desired — it will be paired and connected automatically.

Note

1. The E1 projector is compatible with the Bluetooth headsets, Bluetooth speakers and Airpods, but not the Bluetooth keyboards or Bluetooth phones.
2. If you have any question, please feel free to contact us via [email protected]

Projector Setting

Picture Menu

• Go to home page — Select [ Setting ] — Select the [ PICTURE ] .Use the arrow keys on the remote control to switch the menu, press the “OK” to confirm and set.

Sound Menu

• Go to home page — Select [ Setting ] — Select the [ SOUND ] .Use the arrow keys on the remote control to switch the menu, press the “OK” to confirm and set.

Option Menu (ZOOM & Keystone correction)

• Go to home page — Select [ Setting ] — Select the [ OPTION ] .Use the arrow keys on the remote control to switch the menu, press the “OK” to confirm and set.

SIGNAL LINES CONNECTION

Yaber E1 projector has 3 interfaces, HDMI port1/ USB port2/ 3.5mm headphone output. Please select the correct connecting port to connect your device (PC, DVD Player, Fire TV stick, TV box, Sound bar, USB disk, PS4 etc.)

Connect USB Disk

1. Insert the USB disk into the USB input port;
2. You can directly enter the start-up screen on the home page, select the option [ Movie/Music/Photo/TEXT]
3. Select the desired file (or folder to enter the sub folder) in the USB disk, then press the [ OK ] button to play it.

Connect the Devices via the HDMI port

1. Connect your Fire TV stick ( or PC, TV box, PS4 etc.) to the HDMI port of the projector;
2. Enter the home page to select the corresponding HDMI as the signal source.

Connect to the DVD Player

1. Turn on your DVD player and the projector;
2. Connect to the DVD Player and the projector with the HDMI cable
3. Enter the home page to select the corresponding HDMI as the signal source.

Note: When the projector is connected to the DVD player via the HDMI cable, if there is no sound, it may be that the output signal of the HDMI port of the DVD player is not compatible with HDCP, please try to connect your Sound bar/Speaker.

Connect to the Sound bar/Speaker

• If your speaker has AUX port, please use your 3.5mm audio cable connect the projector and your speaker as the picture shows.

Connect to the Computer

1. Connect to the computer and E1 projector with the HDMI cable (Included).
2. Select the HDMI source to project any files on your computer;
3. On your laptop, hold down the key “Win+P” board keys to change your display mode.

• Computer only: it is the default option – only displays on the main monitor.
• Duplicate: makes all of the monitors display the same thing duplicating the desktop on each monitor.
• Extend: makes all of your monitors act like one big monitor extending the desktop across all of them.
• Projector only: Displays only on the secondary monitor like a projector.

You can change the screen resolution on the Projector Only Mode

• Step: Start > Control Panel > Appearance and Personalization > Adjust Screen Resolution

WARRANTY

• Thank you so much for your purchase and support.
• We provide 3-year warranty for E1 projector.
• If you have any questions, please feel free to contact us via [email protected]

Scan and download the PDF user manual

More Informations

Where to Get More Help

• [email protected]
• [email protected]
• www.yaber.com
• Youtube: @Yaber Entertainment Projector
• FB: @Yaber Entertainment Projector

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Correct Disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Declaration of Conformity

We (EU based importer is responsible for this declaration)

• (Company name): Prolinx GmbH
• (Company address): Brehmstr.56, 40239 Duesseldorf, Germany

declare under our sole responsibility that the product

• Trade name: Yaber
• Equipment: Entertainment Projector
• Model No: E1

to which this declaration relates is in conformity with the essential requirement set out in the Council Directive on the Approximation of the laws of the Member States relating to RED Directive(2014/53/EU) & RoHS(2011/65/EU) product is responsible to affix CE marking, the following standards were applied:

• EN 62368-1:2014+A11:2017
• EN IEC 62311:2020
• ETSI EN 301 489-1 V2.2.3(2019-11)
• ETSI EN 301 489-17 V3.2.4(2020-09)
• ETSI EN 301 489-3 V2.1.1(2019-03)
• EN 55032:2015+A11:2020
• EN 55035:2017 +A11:2020
• EN IEC 61000-3-2:2019
• EN 61000-3-3:2013+A1:2019
• ETSI EN 300 328 V2.2.2(2019-07)
• ETSI EN 301 893 V2.1.1(2017-05)
• ETSI EN 300 440 V2.2.1(2018-07)
• IEC62321-3-1:2013
• IEC62321-4:2013
• IEC62321-5:2013
• IEC62321-6:2015
• IEC62321-7-1:2015
• IEC62321-7-2:2017
• IEC62321-8:2017

Full Name: George.wang
Signature:

Position: Approbation Manager
Place/Date: Shenzhen,China/May.25-2023

References

• Yaber Entertainment Projector

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>