THE HOME DEPOT M-1413 Small Rectangular Frameless Anti-Fog Dimming Wall Bathroom Vanity Mirror Instruction Manual

June 4, 2024
THE HOME DEPOT

THE HOME DEPOT LOGO

THE HOME DEPOT M-1413 Small Rectangular Frameless Anti-Fog Dimming Wall

Bathroom Vanity Mirror

THE HOME DEPOT M-1413 Small Rectangular Frameless Anti-Fog Dimming Wall
Bathroom Vanity Mirror FIG \(2\)

OPERATING INSTRUCTIONS

  1. Touch the sensor switch to turn on the mirror light.
  2. Short touch CCT jump change 3000K-4200K>6500K->OFF->3000K4200K->6500K..
  3. Long touch the button to dim the light.
  4. When reaching the desired brightness, release the button. This brightness setting will be memorized.
  5. Short-touch the anti-fog switch, open (white glow light) or close (blue glow light) the anti-fog function.

CARE AND MAINTENANCE

  1. For cleaning and maintenance, please disconnect the light from the mains. There is a risk of death from electric shock.
  2. To clean the lamp, only use a soft, dry or slightly damp cloth (with the addition of some dishwashing detergent if necessary). Do not use abrasives or solvents for cleaning.

IMPORTANT SAFETY INSTRUCTIONS

When using this mirror light, basic precautions should always be followed, including the following:
Read all instructions before assembling, using this mirror light.

DANGER – To reduce the risk of electric shock

  1. Always unplug this mirror light from the electrical outlet before cleaning or servicing.

WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

  1. Unplug from the outlet before putting on or taking off parts.

  2. Close supervision is necessary when this mirror light is used by, or near children. invalids, or disabled persons.

  3. Use this mirror light only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.

  4. Never operate this mirror light if it has damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the mirror light to a service center for examination or repair.
    Keep the cord away from heated surfaces.

  5. Never drop or insert any object into any opening

  6. Do not use outdoors.

  7. Do not put sharp or hard objects against the mirror surface.

  8. If not being used for a long time, disconnect the light from the mains.

  9. To reduce the risk of electric shock, this mirror light has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

  10. Electric service supply must be 120 volts, 60Hz.

  11. Mount the mirror light at the correct height.

Save these instructions.

Product Specifications

Model SM-38597B(M2-S05-2430-P2-1256-50M)
Dimensions (L x W in.) 24×30

Feature(s)

| -Dual Touch switch on the mirror

-Dimmable 5%-100% with memory

-CCT (Jump change 3000K,4200K,6500K)

-Anti-fog

Material| Environmental Silver and Copper-Free Mirror, Aluminum
Rated Wattage(W}| 46(Light 30W + Anti-fog 16w)
Input Voltage (V AC}| 120
Input Frequency Range (Hz}| 60
Light Source| SMD 2835 LED, CRl 80, SDCM<6,3000K+6500K
Operating Temperature| -68°F to 113°F – Indoors
Protection Class| Class II
Installation Accessories| Anchors(2pcs), Screws(2pcs)
Application| Suitable for damp locations.

Assembly Instructions

  1. Using a ruler to measure the distance between the holes and mark the drill holes on the wall(1)

  2. Drill 2 anchor holes(¢0.314 in.,depth more than 1.57 in.)on the concrete or brick wall((2)).(You can screw directly onto a wooden surface. However, you should also pre-drill holes when mounting on wood. In this case, the anchors are not required.)

  3. Insert 2 wall anchors into the holes on the wall(3))

  4. Insert the screws into the anchors and screw up, leaving 0.2 in. space between the screw head and the wall (4)

  5. Insert the screw heads into the mounting brackets on the back of the lighted mirror, hang
    the mirrors carefully on the screws((5)).

  6. Connect the AC plug on the lighted mirror to the wall socket((6).

  7. Anti-fog switch and light switch.

Ningbo Miclion LED Lighting Co., Ltd
Email:sales@miclionled.com
www.miclionled.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

THE HOME DEPOT User Manuals

Related Manuals