ACURA 2024 ZDX Motar Car User Manual
- August 29, 2024
- Acura
Table of Contents
- 2024 ZDX Motar Car
- Specifications
- Product Usage Instructions
- Introduction
- Using this Manual
- Danger, Warning, and Notice
- Symbols
- Vehicle Symbol Chart
- Instrument Panel Overview
- Keys, Doors, and Windows
- Q: How do I activate the Lane Keep Assist feature?
- Q: What should I do if the Tire Pressure Monitor symbol
2024 ZDX Motar Car
“`html
Specifications
- Model: 2024 ZDX
- Vehicle Type: Sedan
- Engine: [insert engine specifications]
- Transmission: [insert transmission type]
- Color Options: [list available colors]
Product Usage Instructions
Introduction
Welcome to the Owner’s Manual for the 2024 ZDX. This manual
contains important information about your vehicle. Please read it
carefully to ensure safe and proper usage of your vehicle.
Using this Manual
To quickly find information, use the Index located at the back
of the manual. It provides an alphabetical list of topics along
with their corresponding page numbers.
Danger, Warning, and Notice
Pay attention to warning messages in this manual and on vehicle
labels. Danger signifies a high-risk hazard leading to serious
injury or death. Warning indicates potential injury or death, while
Notice alerts about hazards causing property or vehicle damage.
Symbols
The vehicle uses symbols alongside text for operations or
information. Look out for symbols like M (additional instructions
in owner’s manual), * (additional instructions in service manual),
and 0 (more information on another page).
Vehicle Symbol Chart
Refer to the features section in this manual for explanations of
various symbols found on the vehicle, such as Rear Cross Traffic
Alert, Service Vehicle Soon, and Tire Pressure Monitor.
Instrument Panel Overview
- Air Vents
- Regenerative Braking
- Turn Signal Lever
- Forward Collision Alert System
- Heated Steering Wheel
- Hood Release
- Electric Parking Brake
- Lane Keep Assist
- Automatic Vehicle Hold Light
- Instrument Panel Illumination Control
Keys, Doors, and Windows
This section covers information about doors, liftgate, vehicle
security, exterior mirrors (convex, power, folding, heated), and
interior mirrors (rearview, automatic dimming, rear camera
mirror).
FAQs
Q: How do I activate the Lane Keep Assist feature?
A: To activate Lane Keep Assist, locate the corresponding button
on the instrument panel and press it. The system will engage and
assist you in keeping the vehicle within the lane.
Q: What should I do if the Tire Pressure Monitor symbol
illuminates?
A: If the Tire Pressure Monitor symbol lights up on the
instrument panel, it indicates low tire pressure. Check the tire
pressure using a gauge and inflate as needed to the recommended
levels.
“`
Owner’s Manual
2024 ZDX
Contents
Introduction …………………………………………………….. 1 Keys, Doors, and Windows ……………………………… 6
Seats and Restraints ……………………………………….32 Storage ……………………………………………………………78
Instruments and Controls ………………………………. 81 Lighting ………………………………………………………….116
Infotainment System …………………………………… 122 Climate Controls …………………………………………… 147
Driving and Operating ………………………………….. 155 Vehicle Care
…………………………………………………..255 Service and Maintenance ……………………………… 313 Technical
Data ………………………………………………. 318 Customer Information …………………………………. 320 Reporting
Safety Defects ………………………………323 OnStar …………………………………………………………..328 Connected
Services ……………………………………….333 INDEX …………………………………………………………….337
Introduction
California Proposition 65 Warning
Introduction 1
2 Introduction
Introduction
The names, logos, emblems, slogans, vehicle model names, and vehicle body
designs appearing in this manual including, but not limited to, Acura, the
Acura logo, the Acura Emblem, and ZDX are trademarks and/or service marks of
Acura, its subsidiaries, affiliates, or licensors. This manual describes
features that may or may not be on the vehicle because of optional equipment
that was not purchased on the vehicle, model variants, country specifications,
features/applications that may not be available in your region, or changes
subsequent to the printing of this owner’s manual, including changes in
standard or optional content. Refer to the purchase documentation relating to
your specific vehicle to confirm the features. Keep this manual in the vehicle
for quick reference.
Using this Manual
To quickly locate information about the vehicle, use the Index in the back of
the manual. It is an alphabetical list of what is in the manual and the page
number where it can be found.
Danger, Warning, and Notice
Warning messages found on vehicle labels and in this manual describe hazards
and what to do to avoid or reduce them.
{ Danger
Danger indicates a hazard with a high level of risk which will result in
serious injury or death.
{ Warning
Warning indicates a hazard that could result in injury or death.
Notice Notice indicates a hazard that could result in property or vehicle
damage.
A circle with a slash through it is a safety symbol which means “Do not,” “Do
not do this,” or “Do not let this happen.”
Symbols
The vehicle has components and labels that use symbols instead of text.
Symbols are shown along with the text describing the operation or information
relating to a specific component, control, message, gauge, or indicator. M :
Shown when the owner’s manual has additional instructions or information. * :
Shown when the service manual has additional instructions or information. 0 :
Shown when there is more information on another page — “see page.”
Vehicle Symbol Chart
Here are some additional symbols that may be found on the vehicle and what
they mean. See the features in this manual for information.
u : Air Conditioning System G : Air Conditioning Refrigerant Oil 9 : Airbag Readiness Light ! : Antilock Brake System (ABS) $ : Brake System Warning Light 9 : Dispose of Used Components Properly P : Do Not Apply High Pressure Water [ : Energy Usage and Charge Mode Selection : Flame/Fire Prohibited H : Flammable g : First Responder [ : Forward Collision Alert R : Fuse Block Cover Lock Location + : Fuses : High Voltage j : ISOFIX/LATCH System Child Restraints Q : Keep Fuse Block Covers Properly Installed | : Lane Change Alert @ : Lane Departure Warning A : Lane Keep Assist X : Park Assist ~ : Pedestrian Ahead Indicator O : Power
7 : Rear Cross Traffic Alert
I : Registered Technician / : Remote Vehicle Start h : Risk of Electrical Fire
: Seat Belt Reminders Z : Service Vehicle Soon I : Side Blind Zone Alert
7 : Tire Pressure Monitor d : Traction Control/Electronic Stability Control (ESC) a : Under Pressure k : Vehicle Ahead Indicator ] : Vehicle Ready
Introduction 3
4 Introduction
Instrument Panel Overview
1. Air Vents 0 152. 2. Regenerative Braking 0 176 3. Turn Signal Lever. See
Turn and Lane-
Change Signals 0 119. Windshield Wiper/Washer 0 82. 4. Shift Lever. See
Electric Drive Unit 0 170. 5. Light Sensor. See Automatic Headlamp System 0
118. 6. Infotainment Display. See Using the System 0 124. Instrument Cluster 0
89. 7. Instrument Panel Fuse Block 0 274. 8. Glove Box 0 78. 9. Dual Automatic
Climate Control System 0 147. 10. Wireless Charging 0 86. 11. Power Button 0
167 (Out of View). 12. Radio Controls. See Steering Wheel Controls 0 123. 13.
Horn 0 82. 14. Steering Wheel Adjustment 0 82 (Out of View). 15. Adaptive
Cruise Control (Advanced) 0 185. Hands Free Cruise 0 194 (If Equipped).
Forward Collision Alert (FCA) System 0 223 (If Equipped). Heated Steering Wheel 0 82. 16. Hood Release. See Hood 0 257. 17. Electric Parking Brake 0 174. Lane Keep Assist (LKA) 0 234 (If Equipped). Automatic Vehicle Hold (AVH) Light 0 96. Instrument Panel Illumination Control 0 119.
Introduction 5
6 Keys, Doors, and Windows
Keys, Doors, and Windows
Keys and Locks Keys …………………………………………………………….. 6 Remote Key
…………………………………………………..7 Remote Key Operation …………………………………7 Remote Start
……………………………………………….12 Door Locks …………………………………………………..13 Power Door Locks
………………………………………..15 Delayed Locking ………………………………………….15 Automatic Door Locks
…………………………………15 Lockout Protection ………………………………………16 Safety Locks
………………………………………………..16 Key Card ……………………………………………………..16
Doors Liftgate ………………………………………………………. 17
Vehicle Security Vehicle Security ………………………………………… 23 Vehicle Alarm System
……………………………….. 23 Immobilizer ……………………………………………….. 23 Immobilizer Operation
………………………………. 23
Exterior Mirrors Convex Mirrors ………………………………………….. 24 Power Mirrors
……………………………………………. 25
Folding Mirrors …………………………………………..25 Heated Mirrors ………………………………………….. 26
Interior Mirrors Interior Rearview Mirrors ………………………….. 26 Automatic Dimming
Rearview Mirror ………. 26 Rear Camera Mirror …………………………………… 26
Windows Windows …………………………………………………… 29 Power Windows ………………………………………… 29 Sun
Visors …………………………………………………. 30
Roof Sunroof ……………………………………………………… 30
Keys and Locks
Keys
{ Warning
Leaving children in a vehicle with a remote key is dangerous and children or
others could be seriously injured or killed. They could operate the power
windows or other controls or make the vehicle move. The windows will function
with the remote key in the vehicle, and children or others could be caught in
the path of a closing window. Do not leave children in a vehicle with a remote
key.
The mechanical key that is inside of the remote key can be used for all locks.
To remove the mechanical key, press the button near the bottom of the remote
key, and pull the key out. Never pull the mechanical key out without pressing
the button. If it becomes difficult to turn the key, inspect the key blade for
debris. Periodically, clean the key with a brush or a pick. See your dealer if
a new key is needed. If locked out of the vehicle, contact Roadside
Assistance. With an active OnStar or connected service plan, an OnStar Advisor
may remotely unlock the vehicle. See OnStar Overview 0 328.
Remote Key
See Radio Frequency Statement 0 322. If there is a decrease in the Remote
Keyless Entry (RKE) operating range: · Check the distance. The transmitter may
be
too far from the vehicle. · Check the location. Other vehicles or objects
may be blocking the signal. · Check the transmitter’s battery. See “Battery
Replacement” later in this section. · If the transmitter is still not working
correctly, see your dealer or a qualified technician for service.
Remote Key Operation
The Keyless Access system allows for vehicle entry when the remote key is
within 1m (3 ft). See “Keyless Access Operation” later in this section. The
remote key functions may work up to 60m (197 ft) away from the vehicle. Other
conditions can impact the performance of the remote key. See Remote Key 0 7.
Keys, Doors, and Windows 7
Q : Press to lock all doors. If enabled, the turn signal indicators may flash
and/or the horn may sound on the second press to indicate locking. To view
available settings from the infotainment home screen, touch Settings > Vehicle
Remote Lock, Unlock, Start. If the driver door is open when Q is pressed, all doors will lock and the driver door will immediately unlock, if enabled. To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, and Start”.
8 Keys, Doors, and Windows
If the passenger door is open when Q is pressed, all doors lock.
If equipped with auto mirror folding, double press and hold Q for one second
to fold the mirrors, if enabled. To view available settings for this feature,
touch the Settings icon on the infotainment home page. Select “Vehicle” to
display the list of available options and select “Comfort and Convenience”.
Pressing Q may also arm the alarm system. See Vehicle Alarm System 0 23.
K : Press to unlock the driver door. Press unlock again within three seconds
to unlock all doors. The remote key can be programmed to unlock all doors on
the first button press. To view available settings for this feature, touch the
Settings icon on the infotainment home page. Select “Vehicle” to display the
list of available options and select “Remote Lock, Unlock, and Start”.
If enabled, the turn signal lamps flash twice to indicate that the unlocking
has occurred. The exterior lamps may also be programmed to turn on. To view
available settings for this feature, touch the Settings icon on the
infotainment
home page. Select “Vehicle” to display the list of available options and
select “Remote Lock, Unlock, and Start”.
If equipped with auto mirror unfolding, double press and hold K until the
mirrors fully open. To view available settings for this feature, touch the
Settings icon on the infotainment home page. Select “Vehicle” to display the
list of available options and select “Comfort and Convenience”.
Pressing K will disarm the alarm system. See Vehicle Alarm System 0 23.
b : Press twice to open or close the liftgate. Press once to stop the liftgate
from moving. The vehicle must be in P (Park).
7 : Press and release one time to initiate vehicle locator. The exterior lamps
flash and the horn chirps three times.
Press and hold 7 for at least three seconds to sound the panic alarm. The horn
sounds and the turn signals flash for about 30 seconds or until 7 is pressed
again or the vehicle is started.
/ : Press and release Q and then immediately press and hold / for at least
four seconds to start the vehicle’s heating or air conditioning
systems and rear window defogger from outside the vehicle using the remote
key. See Remote Start 0 12.
Keyless Access Operation
The Keyless Access system allows the doors and liftgate to be unlocked without
pressing the remote key button. The remote key must be within 1 m (3 ft) of
the liftgate or door being opened.
Doors can be programmed to lock after exiting the vehicle through Passive
locking or delayed locking. The remote key can also be used to lock the doors
Keyless Access can be programmed to unlock all doors when the driver door
handle is pulled. All doors will unlock when any non-driver door handle is
pulled regardless of the current setting. To view available settings from the
infotainment screen, touch Settings > Vehicle > Remote Lock, Unlock, and
Start.
Keyless Unlocking from the Driver Door
When the doors are locked and the remote key is within 1 m (3 ft) of the
driver door handle, pressing the unlock button on the driver door handle will
unlock the driver door.
Keyless Unlocking/Locking from Passenger Doors
When the doors are locked and the remote key is within 1m (3ft) of the door
unlocking button, pressing the unlock button on that door will unlock all
doors.
Disable/Enable Keyless Unlocking of Exterior Door Handles and Liftgate
If equipped, keyless unlocking of the exterior door handles and liftgate can
be disabled and enabled. Disabling Keyless Unlocking:
With the vehicle off, press and hold Q and K on the remote key at the same
time for approximately three seconds. The turn signal lamps will flash four
times quickly to indicate access is disabled. Using any exterior handle to
unlock the doors or open the liftgate will cause the turn signal lamps to
flash four times quickly, indicating access is disabled. If disabled, disarm
the alarm system before starting the vehicle.
Enabling Keyless Unlocking:
With the vehicle off, press and hold Q and K on the remote key at the same
time for approximately three seconds. The turn signal lamps will flash twice
quickly to indicate access is enabled.
Passive Locking
The Keyless Access system will lock the vehicle several seconds after all
doors are closed, if the vehicle is off and at least one remote key has been
removed from the interior or none remain in the interior.
If other electronic devices interfere with the remote key signal, the vehicle
may not detect the remote key inside the vehicle.
Keys, Doors, and Windows 9
If passive locking is enabled, the doors may lock with the remote key inside
the vehicle. Do not leave the remote key in an unattended vehicle. To view
available settings from the infotainment home screen, touch Settings > Vehicle
Power Door Locks.
Temporary Disable of Passive Locking
Temporarily disable passive locking by pressing and holding K on the interior door switch with a door open for at least four seconds, or until three chimes are heard. Passive locking will then remain disabled until Q on the interior door is pressed, or until the vehicle is started.
Remote Left In Vehicle Alert
When the vehicle is turned off and a remote key is left in the vehicle, the horn will chirp three times after all doors are closed.
To view available settings for this feature, touch the Settings icon on the infotainment home page. Select “Vehicle” to display the list of available options and select “Remote Lock, Unlock, and Start”.
10 Keys, Doors, and Windows
Remote Removed From Vehicle Alert
If the vehicle is on with a door open, and then all doors are closed, the
vehicle will check for remote keys inside. If a remote key is not detected,
the Driver Information Center (DIC) will display NO KEY FOUND and the horn
will chirp three times. This occurs only once each time the vehicle is driven.
To view available settings for this feature, touch the Settings icon on the
infotainment home page. Select “Vehicle” to display the list of available
options and select “Remote Lock, Unlock, and Start”.
Keyless Liftgate Opening
Press the touch pad on the underside of the liftgate glass and lift up to open
if the remote key is within 1m (3ft) and the doors are locked. If the doors
are unlocked, the remote key is not required to open the liftgate. See
Liftgate 0 17.
Key Access
To access a vehicle with a weak remote key battery, see Door Locks 0 13.
Programming Remote Keys to the Vehicle
Only remote keys programmed to the vehicle will work. If a remote key is lost
or stolen, a replacement can be purchased and programmed through your dealer.
The vehicle can be reprogrammed so that lost or stolen remote keys no longer
work. Any remaining remote keys will need to be reprogrammed. Each vehicle can
have up to eight remote keys matched to it.
Starting the Vehicle with a Low Remote Key Battery
For improved Vehicle security, the remote key is equipped with a motion
sensor. When starting the vehicle, if the remote key has been idle for an
extended period of time, the DIC may display KEY IN SLEEP MODE, MOVE KEY, THEN
START. Move the remote key slightly and try starting the vehicle.
If the remote key battery is weak or if there is interference with the signal,
the DIC may display NO KEY FOUND, REPLACE BATTERY IN KEY or NO REMOTE KEY WAS
DETECTED PLACE KEY IN KEY POCKET THEN START YOUR VEHICLE when starting the
vehicle.
To start the vehicle:
1. Place the remote key in the rear cupholder with the buttons facing down.
2. With the vehicle in P (Park) or N (Neutral), press the brake pedal and
press POWER O. Replace the remote key battery as soon as possible.
Battery Replacement
{ Warning
Never allow children to play with the remote key. The remote key contains a
small battery, which can be a choking hazard. If swallowed, internal burns can
occur, resulting in severe injury or death. Seek medical attention immediately
if a battery is swallowed.
{ Warning
To avoid personal injury, do not touch metal surfaces on the remote key when
it has been exposed to extreme heat. These surfaces can be hot to the touch at
temperatures above 59 °C (138 °F).
Notice
When replacing the battery, do not touch any of the circuitry on the remote
key. Static from your body could damage the remote key.
Notice
Always replace the battery with the correct type. Replacing the battery with
an incorrect type could potentially create a risk of battery explosion.
Dispose of used batteries according to instructions and local laws. Do not
attempt to burn, crush, or cut the used battery, and avoid exposing the
battery to environments with extremely low air pressures or high temperatures.
Notice
If the remote key is not reassembled properly, liquids could enter the housing
and damage the circuitry, resulting in a remote key malfunction and/or
failure. To prevent damage, always follow the steps for remote key reassembly
in this manual to ensure the remote key is sealed properly whenever the remote
key is opened.
Replace the battery if the DIC displays REPLACE BATTERY IN KEY. The battery is
not rechargeable. To replace the battery:
Keys, Doors, and Windows 11
1. Press the button on the side of the remote key near the bottom and pull
the mechanical key out. Never pull the mechanical key out without pressing the
button.
12 Keys, Doors, and Windows
2. Use the mechanical key blade in the slot to remove the battery cover by
hand.
3. Remove the battery cover.
4. Pull the seal by pulling on the tab to access the battery.
5. Remove the old battery. Do not use a metal object.
6. Insert the new battery, positive side facing up. Replace with a CR2450
Lithium or equivalent battery.
7. Place the seal back into the groove around the battery compartment.
8. Replace the battery cover by snapping it back into the remote key.
9. Reinsert the mechanical key.
Remote Start
This feature starts the heating or air conditioning systems and the rear
window defogger from outside the vehicle.
If the outside temperature is below 7°C (45°F), and the rear window defogger
is on, the area of the windshield beneath the windshield wipers will warm up
to melt accumulated snow or ice.
Use remote start to heat or cool the interior when the vehicle is plugged in
to maximize electric range by utilizing electricity from the electrical
outlet. Normal system operation will return after the vehicle has been turned
on.
/ : This button is on the remote key.
The climate control system will use the previous settings during a remote
start. The rear defog may come on during a remote start based on cold ambient
conditions. The rear defog indicator light will not come on during a remote
start.
Laws in some local communities may restrict the use of remote starters. For
example, some laws require a person using remote start to have the vehicle in
view. Check local regulations for any requirements.
The vehicle cannot be remote started if:
· The remote key is in the vehicle.
· The hood is open.
· The total 60 minutes of remote start time has been used.
· The hazard flashers are on.
· The vehicle is not in P (Park).
· The vehicle is already started.
If the battery level is low, do not use the remote start feature. The battery
may fully deplete.
The remote key range may be less while the vehicle is running.
Other conditions may affect the range and performance of the remote key. See
Remote Key 0 7.
Starting the Vehicle Using Remote Start
Press / twice on the remote key. The turn signal lamps will flash to confirm
the remote start request was received. During the remote start, the parking
lamps will remain on as long as the vehicle is on. The vehicle will turn off
after 60 minutes, unless you stop the remote start before remote start cycle
has completed or the vehicle is turned on. Hold the brake pedal and press
POWERO to drive.
Extending Remote Start Time
Remote start can be used for up to 60 minutes of total remote start time.
After a remote start of 60 minutes, or multiple shorter starts totaling 60
minutes, the vehicle must be started and then turned off before the remote
start can be used again.
Canceling a Remote Start
To cancel a remote start, do one of the following:
· Press /. The parking lamps will turn off. · Turn on the hazard warning
flashers. · Turn the vehicle on and then off.
Door Locks
{ Warning
Unlocked doors can be dangerous. · Passengers, especially children, can easily
open the doors and fall out of a moving vehicle. The doors can be unlocked and
opened while the vehicle is moving. The chance of being thrown out of the
vehicle in a crash is increased if the doors are not locked. So, all
passengers should wear seat belts properly and the doors should be locked
whenever the vehicle is driven. · Young children who get into unlocked
vehicles may be unable to get out. A child can be overcome by extreme heat and
can suffer permanent injuries or even death from heat stroke. Always lock the
vehicle whenever leaving it.
(Continued)
Keys, Doors, and Windows 13
{ Warning (Continued)
· Outsiders can easily enter through an unlocked door when you slow down or
stop the vehicle. Locking the doors can help prevent this from happening.
To lock or unlock the doors from outside the vehicle: · Press Q or K on the
remote key to lock and
unlock the doors. · In the case of a dead battery, use the key in
the driver door. The key lock cylinder is covered with a cap. To lock or
unlock the doors from inside the vehicle: · Press Q or K on the power door
lock switch. · Pull the door handle once to unlock the door. Pull the handle
again to unlatch it.
14 Keys, Doors, and Windows
Keyless Access
Driver Door Key Lock Cylinder Access (In Case of Dead Battery)
The remote key must be within 1 m (3 ft) of the liftgate or door being opened. Press the button on the door handle to unlock. See “Keyless Access Operation” in Remote Key Operation 0 7.
To access the driver door key lock cylinder:
1. Insert the mechanical key into the slot on the bottom of the handle. Turn
the key to release the cap.
2. Open the cap.
3. Use the key in the cylinder. To return the cap to its previous position:
1. Remove the mechanical key from the door lock cylinder.
2. Insert the cap back into the grooves on the door handle.
3. Push down on the cap until it clicks into place.
Free-Turning Locks If the free-turning door lock feature is equipped, the door
key lock cylinder turns freely when either the wrong key is used, or the
correct key is not fully inserted. The free-turning door lock feature prevents
the lock cylinder from being forced open. To reset the lock cylinder, ensure
the correct key is fully inserted into the lock cylinder. Rotate the key until
you feel the lock cylinder click back into place. Remove the key and reinsert
fully, then rotate the key to unlock the vehicle.
Power Door Locks
K : Press to unlock the doors.
Keys, Doors, and Windows 15
Q : Press to lock the doors. Locking and unlocking the doors will also unlock
the liftgate. See Liftgate 0 17.
Delayed Locking
This feature delays the locking of the doors until five seconds after all
doors are closed. When Q is pressed on the power door lock switch while the
door is open, a chime will sound three times indicating delayed locking is
active. The doors will lock automatically five seconds after all doors are
closed. If a door is reopened before that time, the five-second timer will
reset when all doors are closed again. Press Q on the door lock switch again
or press Q on the remote key to lock the doors immediately. To view available
settings from the infotainment home screen, touch Settings > Vehicle > Power
Door Locks.
Automatic Door Locks
The doors will lock automatically when all doors are closed, the vehicle is
on, and the shift switch is out of P (Park).
16 Keys, Doors, and Windows
If a vehicle door is unlocked and then opened and closed, the doors will lock
either when your foot is removed from the brake or the vehicle speed becomes
faster than 13km/h(8mph).
To unlock the doors: · Press K on a door.
· Shift the vehicle into P(Park).
Automatic door locking cannot be disabled.
Automatic door unlocking can be programmed. To view available settings from
the infotainment screen, touch Settings > Vehicle > Power Door Locks.
Lockout Protection
This feature protects you from locking remote keys in the vehicle.
When the lock button is pressed and the vehicle is on, with the driver door
open, all of the doors will lock and then the driver door will unlock.
If the vehicle is off and locking is requested while a door is open, when all
doors are closed the vehicle will check for remote keys inside. If a remote
key is detected and the number of remote keys inside has not reduced, the
driver door will unlock and the horn will sound three times.
This can be manually overridden by pressing and holding Q on the power door
lock switch.
Safety Locks
The rear door safety locks prevent passengers from opening the rear doors from
inside the vehicle. To activate the safety locks:
1. Touch the settings icon on the infotainment display.
2. Select Controls. 3. Touch DRIVE & PARK and then Child Safety
Locks. 4. Select On or Off to activate or deactivate
the safety locks.
Key Card
Your vehicle may be equipped with a key card that unlocks, locks, and starts
the vehicle. The key card works by tapping and holding the card on the
location of the vehicle as shown on the back of the card. Only key cards
programmed to the vehicle will work. If a key card is lost or stolen, a
replacement can be purchased and
programmed through your dealer. To prevent lost or stolen key cards from being
able to operate the vehicle, see your dealer. Each vehicle can have up to
eight key cards programmed to it. If the key card is placed on the back of a
smartphone or inside an RFID blocking device or wallet, it may not work.
Unlocking with the Key Card
Tap and hold your key card on the driver outer handle for up to 3 seconds to
unlock the driver door. Only the driver door may be unlocked this way.
Locking with the Key Card
With all doors closed and the vehicle off tap and hold your key card on the
driver outer handle for up to 3 seconds to lock all doors.
Starting with the Key Card
After unlocking the driver’s door, you have up to 120 seconds to start the
vehicle. Otherwise, you will have to lock and unlock the vehicle with your key
card to start the vehicle.
Doors
Liftgate
Notice
To avoid damage to the liftgate or liftgate glass, make sure the area above
and behind the liftgate is clear before opening it.
To lock or unlock the liftgate from the outside, press Q or K on the remote
key. To lock or unlock the liftgate from the inside, press Q or K on the
instrument panel.
Power Liftgate Operation
{ Warning
You or others could be injured if caught in the path of the power liftgate.
Make sure there is no one in the way of the liftgate as it is opening and
closing. You can be hurt.
Notice
Driving with an open and unsecured liftgate may result in damage to the power
liftgate components.
Power Liftgate Mode Selection
To view available settings from the infotainment screen, touch Settings >
Vehicle > Comfort and Convenience > Power Rear Gate Opening. Choose from the
following selections: Maximum : Opens to the maximum height. Custom : Opens to
a reduced height that can be set between a programmed height and fully open.
See “Setting the Custom Opening Height” later in this section.
Keys, Doors, and Windows 17
Use to prevent the liftgate from opening into overhead obstructions, such as a
garage door or roof-mounted cargo. The liftgate can be manually opened all the
way. Off : Opens manually only. Select Maximum or Custom to power open or
close the liftgate. To open or close the liftgate using the remote key, press
b twice quickly until the liftgate moves. Operating the Power Liftgate from
the Inside
To open or close the liftgate from the inside, press 8.
18 Keys, Doors, and Windows
Keyless Liftgate Opening
The remote key must be within 1 m (3 ft), when the doors are locked, to open
the liftgate. If the doors are unlocked, the remote key is not required to
open the liftgate.
Press the touchpad on the underside of the liftgate glass to power open the
liftgate when the power liftgate mode is set to Maximum or Custom.
Press the touchpad on the underside of the liftgate glass and lift up to open
when the power liftgate mode is set to Off.
See “Power Liftgate Mode Selection” earlier in this section.
To open the liftgate, press the touchpad on the underside of the liftgate
glass for more than one second and lift open the liftgate.
When closing the liftgate, press the button on the bottom of the gate. Press
any liftgate button, the liftgate handle, or b on the remote key while the
liftgate is moving to stop it. Pressing any liftgate button or pressing b
twice quickly on the remote key restarts the operation in the reverse
direction. Pressing the liftgate handle will restart the motion, but only in
the opening direction.
Notice
Manually operating the liftgate during a power open or close can damage the
liftgate system. Always wait for the power operation to complete before
manually operating the liftgate.
The power liftgate may be temporarily disabled in extremely low temperatures,
or after repeated opening and closings over a short period of time. If this
occurs, the liftgate can still be operated manually.
If the vehicle is shifted out o P (Park) while the power liftgate operation is
in progress, the operation will continue to completion. If the vehicle is
driven before the liftgate has completed moving, the liftgate may stop or
reverse direction. Check for Driver Information Center (DIC) messages, and
make sure that the liftgate is closed and latched before driving.
Falling Liftgate Detection
If the power liftgate automatically closes after a power opening cycle, it
indicates that the system is reacting to excess weight on the liftgate or a
possible support strut failure. A
repetitive chime will sound while the falling liftgate detection feature is
operating. Remove any excess weight. If the liftgate continues to
automatically close after opening, see your dealer for service before using
the power liftgate.
Interfering with the power liftgate motion or manually closing the liftgate
too quickly after power opening may resemble a support strut failure. This
could also activate the falling liftgate detection feature. Allow the liftgate
to complete its operation and wait a few seconds before manually closing the
liftgate.
Obstacle Detection Features
If the liftgate encounters an obstacle during a power open or close cycle, the
liftgate will automatically reverse direction and move a short distance away
from the obstacle. After removing the obstruction, the power liftgate
operation can be used again. If the liftgate encounters multiple obstacles on
the same power cycle, the power function will deactivate. After removing the
obstructions, manually close the liftgate. This will allow normal power
operation functions to resume.
If the vehicle is locked while the liftgate is closing, and an obstacle is
encountered that prevents the liftgate from completely closing, the horn will
sound as an alert that the liftgate did not close.
Setting the Custom Opening Height
To change the position the liftgate stops at when opening:
1. Select MAX or Custom mode and power open the liftgate.
2. Stop the liftgate movement at the desired height by pressing any liftgate
button. Manually adjust the liftgate position if needed.
3. Press and hold 8 on the bottom edge of the liftgate next to the latch on
the outside of the liftgate until the turn signals flash and a beep sounds.
This indicates the setting has been recorded.
The liftgate cannot be set below a minimum programmable height. If there is no
light flash or sound, then the height adjustment may be too low.
Keys, Doors, and Windows 19
Hands-Free Operation
Regulatory Information
FCC Radiation Exposure Statement : This equipment has been evaluated to be
installed and operated at a minimum distance of 3.78 cm between the device and
your body. The vehicle design ensures this distance is maintained during
normal use. Changes or modifications to any of these systems by other than an
authorized service facility could void authorization to use this equipment.
ISED Radiation Exposure Statement : This equipment complies with RSS-102
radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 3.78 cm
between the radiator and any part of your body. The vehicle design ensures
this distance is maintained during normal use. Changes or modifications to any
of these systems by other than an authorized service facility could void
authorization to use this equipment.
See Radio Frequency Statement 0 322. Contains FCC ID 2AQ6KA1003.
20 Keys, Doors, and Windows
If equipped, the liftgate may be operated with a kicking motion near the
center of the rear bumper at the location of the projected logo.
The remote key must be within 1 m (3 ft) of the rear bumper to operate the
power liftgate hands-free.
The hands-free feature will not work while the liftgate is moving. To stop the
liftgate while in motion use one of the liftgate switches.
The hands-free feature can be customized. To view available settings for this
feature, touch the Settings icon on the infotainment home page. Select
“Vehicle” to display the list of available options and select “Comfort and
Convenience”. Choose from the following:
On-Open and Close : The kicking motion is activated to both open and close the
liftgate.
On-Open Only : The kicking motion is activated to only open the liftgate.
Off : The feature is disabled.
Kick Zone
To operate, move your foot in a forward kicking motion under the center of the
rear bumper, at the location of the projected logo, then pull it back. Then
step back. The kick must come within 14 cm (6 in) of the rear bumper to
activate.
· Do not sweep your foot side to side.
· Do not keep your foot under the bumper; the liftgate will not activate.
· Do not touch the liftgate until it has stopped moving.
· This feature may be temporarily disabled under some conditions. If the
liftgate does not respond to the kick, open or close the liftgate by another
method or start the vehicle. The feature will be re-enabled.
When closing the liftgate using this feature, there will be a short delay. The
taillamps will flash and a chime will sound. Step away from the liftgate
before it starts moving.
Projected Logo
If equipped, a vehicle logo will be projected for one minute onto the ground
near the rear bumper when a remote key is detected within approximately 2 m (6
ft) from the rear bumper. The projected logo may not be visible under brighter
daytime conditions.
1. 1 m (3 ft) Hands-Free Operation Detection Zone
2. 2 m (6 ft) Projected Logo Detection Zone
The projected logo shows where to kick toward the rear bumper.
The projected logo will not be restarted using the same remote key unless it
has been out of range for longer than 20 seconds.
If a remote key is again detected within approximately 2 m (6 ft) of the
liftgate, or another kick has been detected, the one-minute timer will be
reset.
The projected logo will not work under these conditions:
· The vehicle battery is low.
· The vehicle is not in P (Park).
· Hands Free Liftgate/Trunk Control is set to Off in vehicle personalization.
To view available settings for this feature, touch the Settings icon on the
infotainment home page. Select “Vehicle” to display the list of available
options and select “Comfort and Convenience”.
· Power liftgate is turned off.
· The vehicle remains parked for 72 hours or more, with no remote key use or
Keyless Access operation. To re-enable, press any button on the remote key or
open and close a vehicle door.
The projected logo will not work for a single remote key when a remote key:
· Has been left within approximately 5 m (15 ft) of the liftgate for several
minutes.
· Has been left inside the vehicle and all vehicle doors are closed.
· Has approached the area outside of the liftgate five times within 10
minutes.
Keys, Doors, and Windows 21
22 Keys, Doors, and Windows
Hands-Free Liftgate and Projected Logo Availability
Action
Hands-Free Liftgate
Projected Logo
Remote key entering projected logo detection Operative zone
On for one minute
Remote key left inside projected logo detection Operative zone for minimum of 10 minutes
Off until remote key button press or a door is opened and closed
Remote key brought in and out of projected logo Operative detection zone five times or more within 10 minutes
Off for one hour or until remote key button press or a door is opened and closed
Vehicle remains parked for more than 72 hours Operative
Off until remote key button press or a door is opened and closed
Vehicle battery is low
Non-operative
Off
Vehicle is not in P (Park)
Non-operative
Off
Power liftgate is turned off
Non-operative
Off
Hands-free liftgate is disabled in vehicle
Non-operative
Off
personalization
Vehicle Security
This VehicleSecurity vehicle has theft-deterrent features; however, they do
not make the vehicle impossible to steal.
Vehicle Alarm System
Arming the Alarm System
1. Turn off the vehicle. 2. Lock the vehicle in one of three ways:
· Use the remote key. · Use the Keyless Access system. · With a door open,
press Q on the interior
of the door. 3. After 30 seconds the alarm system will
arm, and the indicator light will begin to slowly flash. Pressing Q on the
remote key a second time will bypass the 30-second delay and immediately arm
the alarm system. The vehicle alarm system will not arm if the doors are
locked with the mechanical key. If the driver door is opened without first
unlocking with the remote key, the horn will chirp and the lights will flash
to indicate pre-
alarm. If the vehicle is not started, or the door is not unlocked by pressing
K on the remote key during the 10-second pre-alarm, the alarm will be
activated.
The alarm will also be activated if a passenger door, the tailgate, or the
hood is opened without first disarming the system. When the alarm is
activated, the turn signals flash and the horn sounds for about 30 seconds.
The alarm system will then re-arm to monitor for the next unauthorized event.
Disarming the Alarm System
To disarm the alarm system or turn off the alarm if it has been activated: ·
Press K on the remote key.
· Unlock the vehicle using the Keyless Access system.
· Start the vehicle.
To avoid setting off the alarm by accident:
· Lock the vehicle after all occupants have exited.
· Always unlock a door with the remote key, or use the Keyless Access system.
Keys, Doors, and Windows 23
Unlocking the driver door with the mechanical key will not disarm the system
or turn off the alarm.
How to Detect a Tamper Condition
If K is pressed on the remote key and the horn chirps three times, an alarm
occurred previously while the alarm system was armed. If the alarm has been
activated, a message will appear on the Driver Information Center (DIC).
Immobilizer
See Radio Frequency Statement 0 322.
Immobilizer Operation
This vehicle has a passive theft-deterrent system. The system does not have to
be manually armed or disarmed. The vehicle is automatically immobilized when
the vehicle is turned off. The immobilization system is disarmed when the
vehicle is turned and a valid remote key is present in the vehicle.
24 Keys, Doors, and Windows
The security light in the instrument cluster comes on if there is a problem
with arming or disarming the theft-deterrent system. The system has one or
more remote keys matched to an immobilizer control unit in the vehicle. Only a
correctly matched remote key will start the vehicle. If the remote key is ever
damaged, you may not be able to start your vehicle. When trying to start the
vehicle, the security light may come on briefly. If the vehicle does not start
and the security light stays on, there is a problem with the system. Turn the
vehicle off and try again. If the vehicle will not turn on or off, and the
remote key appears to be undamaged, try another remote key. Or, you may try
placing the remote key in the backup location. See Remote Key Operation 0 7.
If the vehicle will not turn on or off with the other remote key or in the
backup location, the vehicle needs service. If the vehicle does turn on or
off, the first remote key may be faulty. See your dealer.
It is possible for the immobilizer system to learn new or replacement remote
keys. Up to eight remote keys can be programmed for the vehicle. To program
additional remote keys, see “Programming Remote Keys to the Vehicle” under
Remote Key Operation 0 7.
Do not leave the remote key or device that disarms or deactivates the theft-
deterrent system in the vehicle.
Exterior Mirrors
Convex Mirrors
{ Warning
A convex mirror can make things, like other vehicles, look farther away than
they really are. If you cut too sharply into the adjacent lane, you could hit
a vehicle that is driving next to you, leading to serious injury or death to
occupants of the vehicles. Check the inside mirror or glance over your
shoulder before changing lanes.
The passenger side mirror is convex shaped so more can be seen from the driver
seat.
Power Mirrors
To adjust the mirrors: 1. Press } or | to choose the driver or passenger
mirror. An indicator will show the selected mirror. 2. Press one of the four
arrows on the control pad while the indicator light on button } or | is
illuminated, to move the mirror in the desired direction. 3. Adjust each
outside mirror so that a little of the vehicle and the area behind it can be
seen.
4. Press } or | again to deselect the mirror. If you do not deselect the
mirror, the mirror adjustment will turn off after about one minute.
Folding Mirrors
To adjust power folding mirrors: 1. Press { to fold the mirrors inward. 2.
Press { again to return the mirrors to the driving position.
The outside mirrors may automatically unfold when the vehicle is driven above
20 km/h (12 mph), but may be folded with the power folding mirror switch. If
the vehicle speed is driven
Keys, Doors, and Windows 25
above 40 km/h (25 mph), they may automatically unfold and may not be refolded
with the power folding mirror switch.
Resetting the Power Folding Mirrors
Reset the power folding mirrors if:
· The mirrors are accidentally obstructed while folding.
· They are accidentally manually folded/ unfolded.
· The mirrors do not stay in the unfolded position.
· The mirrors vibrate at normal driving speeds.
· One mirror folds while the other unfolds.
Fold and unfold the mirrors one time using the mirror controls to reset them
to their normal position. A noise may be heard during the resetting of the
power folding mirrors. This sound is normal after a manual folding operation.
If one mirror folds while the other unfolds, fold and unfold the mirrors three
times using the mirror controls to reset them to their normal position. A
noise may be heard during the
26 Keys, Doors, and Windows
resetting of the power folding mirrors. This sound is normal after a manual
folding operation.
Remote Mirror Folding
If the mirrors have been folded with the power folding mirror switch, they may
not be unfolded by use of remote key.
If the mirrors have not been folded with the power folding mirror switch and
the vehicle is in P (Park), they may be automatically folded/ unfolded as
follows: · If doors are locked by pressing H on the
remote key, the mirrors will fold. If doors are unlocked by pressing I on the
remote key, the mirrors will unfold. See Remote Key Operation 0 7.
· If doors are locked by pressing the door handle button, the mirrors will
fold. If doors are unlocked by pressing the door handle button, the mirrors
will unfold. See “Keyless Unlocking/Locking from the Driver Door” in Remote
Key Operation 0 7.
· If passive locking is enabled and doors are locked by that feature, the
mirrors will fold. See “Passive Locking” in Remote Key Operation 0 7.
Lane Change Alert (LCA)
The vehicle may have LCA. See Lane Change Alert (LCA) 0 231.
Turn Signal Indicator
The vehicle may have a turn signal indicator on the mirror housings. The
indicator will flash when a turn signal or the hazard warning flashers are
used.
Heated Mirrors
If equipped with heated mirrors, 0 will be present on both side mirrors. The
rear window defogger also heats the outside mirrors. K : Press to heat the
outside rearview mirrors. See “Rear Window Defogger” under Dual Automatic
Climate Control System 0 147.
Interior Mirrors
Interior Rearview Mirrors
Adjust the rearview mirror for a clear view of the area behind your vehicle.
Do not spray glass cleaner directly on the mirror. Use a soft towel dampened
with water.
Automatic Dimming Rearview Mirror
If equipped, automatic dimming reduces the glare of headlamps from behind. The
dimming feature comes on when the vehicle is started.
Rear Camera Mirror
If equipped, this automatic dimming mirror provides a wide angle camera view
of the area behind the vehicle.
Keys, Doors, and Windows 27
Pull the tab to turn on the display. Push the tab to turn it off. When off, the mirror is automatic dimming. Adjust the mirror for a clear view of the area behind the vehicle while the display is off.
Press * to scroll through the adjustment options.
Press and ] to adjust the settings using the indicators on the mirror. The
indicators will remain visible for five seconds after the last button
activation, and the settings will remain saved.
The adjustment options are:
· Brightness
· Tilt
28 Keys, Doors, and Windows
Troubleshooting
{ Warning
The Rear Camera Mirror (RCM) has a limited view. Portions of the road,
vehicles, and other objects may not be seen. Do not drive or park the vehicle
using only this camera. Objects may be closer than they appear. Check the
outside mirrors or glance over your shoulder when making lane changes or
merging. Failure to use proper care may result in injury, death, or vehicle
damage.
See your dealer for service if a blue screen and 3 are displayed in the
mirror, and the display shuts off. Also, push the tab as indicated to return
to the automatic dimming mode.
The Rear Camera Mirror may not work properly or display a clear image if:
· There is glare from the sun or headlamps. This may obstruct objects from
view. If needed, push the tab to turn off the display.
· Dirt, snow, or other debris blocks the camera lens. To clean the rear
camera, see Windshield Wiper/Washer 0 82 or clean the lens with a soft damp
cloth.
· The camera’s mounting on the vehicle has been damaged, and/or the position or the mounting angle of the camera has changed.
Windows
Windows
{ Warning
Never leave a child, a helpless adult, or a pet alone in a vehicle, especially
with the windows closed in warm or hot weather. They can be overcome by the
extreme heat and suffer permanent injuries or even death from heat stroke.
The vehicle aerodynamics are designed to improve electric range performance.
This may result in a pulsing sound when either rear window is down and the
front windows are up. To reduce the sound, open a front window.
Power Windows
{ Warning
Children could be seriously injured or killed if caught in the path of a
closing window. Never leave the remote key in a vehicle with children. When
there are children in the rear seat, use the window lockout switch to prevent
operation of the windows. See Keys 0 6.
Keys, Doors, and Windows 29
Press the switch to open the window. Pull the front of the switch up to close
it. The window switches on the driver door control all windows. The power
windows only operate with the vehicle on or in Service Mode, or when Retained
Accessory Power (RAP) is active. Express Window Operation The windows have an
express feature which allows the windows to be lowered or raised without
holding the switch. To automatically raise or lower the window, pull a window
switch up or press it down all the way and release. Stop the window by
pressing or pulling the switch in
30 Keys, Doors, and Windows
the same direction a second time, or by briefly operating the switch to the
first position in either direction.
Remote Window Operation
If equipped, this feature allows all the windows to be opened remotely. If
enabled in vehicle personalization, press and hold K on the remote key. To
view available settings for this feature, touch the Settings icon on the
infotainment home page. Select “Vehicle” to display the list of available
options and select “Remote Lock, Unlock, and Start”.
Safety Function
This is for vehicles with the express-up feature. If any object is in the path
of the window when the express-up feature is active, the window will stop and
auto-reverse to a preset position. Weather conditions may cause the window to
auto-reverse. The window switch may be held up to the second position to close
the window. The window will return to normal operation once the obstruction or
condition is removed.
Safety Function Override
This is for vehicles with the express-up feature. If the battery on the
vehicle has been recharged or disconnected, or is not working, the windows
will need to be reprogrammed for the expressup feature to work. Before
reprogramming, replace or recharge the vehicle’s battery.
To program the driver window:
1. Close all doors with the vehicle on or in Service Mode.
2. Press and hold the power window switch until the window is fully open.
3. Pull the power window switch up until the window is fully closed.
4. Continue holding the switch up for approximately two seconds after the
window is completely closed.
Window Lockout
This feature prevents the rear passenger windows from operating, except from
the driver position.
There is a button on the infotainment display used to enable or disable this
feature.
Sun Visors
Pull the sun visor down to block glare. Detach the sun visor from the center
mount to pivot to the side window or, if equipped, extend along the rod. Visor
Vanity Mirror The vehicle may have vanity mirrors and card holders on the back
of the sun visors. Swing down the sun visor to expose the vanity mirror.
Roof
Sunroof
If equipped, vehicle power must be on to operate the sunroof.
While the sunroof always operates in express mode, movement can be stopped by
pressing the switch again. The sunroof cannot be opened or closed if the
vehicle has an electrical failure.
1. SLIDE Switch 2. Power Sunshade Switch 3. TILT Switch Sunroof Operation: ·
Press and release D (1) to express-open to a partially opened comfort stop
position. · Press and release D (1) again to expressopen to the fully open
position. · Pull and release D (1) to express-close.
· Press or pull D (1) again to stop at the desired location.
· Press and hold D (1) to manually open to desired location.
· Pull and hold D (1) to manually close to desired location.
Sunshade Operation:
· Press and release Q (2) to express-open. · Pull and release Q (2) to
express-close. · Press or pull Q (2) again to stop at the
desired location.
Sunroof Vent Operation:
· Press and release E (3) to vent the sunroof. · Pull and release E (3) to
close the sunroof
vent.
Automatic Reversal System
The sunroof and power sunshade have an automatic reversal system that is only
active when the sunroof and power sunshade are operated in express-close mode.
If an object is in the path while express-closing, the reversal system will
detect an object, stop, and open the sunroof or power sunshade slightly.
Keys, Doors, and Windows 31
If frost or other conditions prevent closing, override the feature by closing
the sunroof or power sunshade in manual mode. To stop movement, release the
switch.
Dirt and debris may collect on the sunroof seal or in the track. This could
cause an issue with sunroof operation or noise. It could also plug the water
drainage system. Periodically open the sunroof and remove any obstacles or
loose debris. Wipe the sunroof seal and roof sealing area using a clean cloth,
mild soap, and water. Do not remove grease from the sunroof.
32 Seats and Restraints
Seats and Restraints
Head Restraints Head Restraints …………………………………………. 33
Front Seats Power Seat Adjustment …………………………….. 34 Reclining Seatbacks
…………………………………… 35 Lumbar Adjustment ………………………………….. 35 Memory Seats
…………………………………………… 36 Heated and Ventilated Front Seats ……………. 38
Rear Seats Rear Seats …………………………………………………..40 Heated Rear Seats
……………………………………….41
Seat Belts Seat Belts …………………………………………………… 42 Buckle To Drive
………………………………………….. 43 How to Wear Seat Belts Properly ……………….44 Lap-Shoulder
Belt ……………………………………….46 Seat Belt Use During Pregnancy ………………..48 Safety
System Check ………………………………….48 Seat Belt Care ……………………………………………..49 Replacing
Seat Belt System Parts after a Crash ………………………………………………………….49
Airbag System Airbag System …………………………………………… 50 Where Are the Airbags?
…………………………….. 51 When Should an Airbag Inflate? …………………52 What Makes an Airbag
Inflate? …………………..53 How Does an Airbag Restrain? ……………………53 What Will You See
after an Airbag Inflates? … 54 Passenger Sensing System …………………………55 Servicing
the Airbag-Equipped Vehicle ……… 58 Adding Equipment to the Airbag-Equipped
Vehicle ………………………………………………………. 59 Airbag System Check ………………………………… 59
Replacing Airbag System Parts after a Crash ………………………………………………………….60
Child Restraints Older Children ……………………………………………60 Infants and Young Children
………………………..61 Child Restraint Systems …………………………….. 63 Where to Put the
Restraint ……………………….. 65 Lower Anchors and Tethers for Children (LATCH System)
…………………………………………66 Replacing LATCH System Parts After a Crash
…………………………………………………………..72 Securing Child Restraints (With the Seat Belt in a
Rear Outside Seat Position) ………………….73
Securing Child Restraints (With the Seat Belt in the Center Rear Seat)
………………………………74
Securing Child Restraints (With the Seat Belt in the Front Seat)
……………………………………….. 75
Head Restraints
Head Restraints
Front Seats
{ Warning
With head restraints that are not installed and adjusted properly, there is a
greater chance that occupants will suffer a neck/ spinal injury in a crash. Do
not drive until the head restraints for all occupants are installed and
adjusted properly.
The vehicle’s front seats have adjustable head restraints in the outboard
seating positions.
Adjust the head restraint so that the top of the restraint is at the same
height as the top of the occupant’s head. This position reduces the chance of
a neck injury in a crash.
The height of the head restraint can be adjusted.
Seats and Restraints 33
Rear Seats
Adjusting the Rear Head Restraint
The vehicle’s rear seats have adjustable head restraints in all three seating
positions. The height of the head restraint can be adjusted. Pull the head
restraint up to raise it. Try to move the head restraint to make sure that it
is locked in place. When you use the head restraint in the rear center seating
position, pull up the head restraint to its highest position. Do not use it in
any lower position.
To raise or lower the head restraint, press the button located on the side of
the head restraint, and pull up or push the head restraint down, and release
the button. Pull and push on the head restraint after the button is released
to make sure that it is locked in place.
The front seat outboard head restraints are not removable.
34 Seats and Restraints
To lower the head restraint, press the button, located on the top of the
seatback, and push the head restraint down. Try to move the head restraint
after the button is released to make sure that it is locked in place.
Always adjust the head restraint so that the top of the restraint is at the
same height as the top of the occupant’s head.
Rear head restraints are not removable.
If you are installing a child restraint in the rear seat, see “Securing a
Child Restraint Designed for the LATCH System” under Lower Anchors and Tethers
for Children (LATCH System) 0 66.
Front Seats
Power Seat Adjustment
{ Warning
Do not adjust driver seat while the vehicle is moving. Doing so could result
in a crash causing death or serious injury. Only adjust driver seat when
vehicle is not moving. You can lose control of the vehicle and be seriously
hurt or killed if you try to adjust the driver’s seat while the vehicle is
moving. Adjust the driver seat only when the vehicle is not moving.
{ Warning
The power seats will work with the vehicle off. Children could operate the
power seats and be injured or killed. Never leave children alone in the
vehicle.
To adjust the seat:
· Move the seat forward or rearward by sliding the control forward or
rearward.
· Raise or lower the front part of the seat cushion by moving the front of the
control up or down.
· Raise or lower the entire seat by moving the rear of the control up or down.
To adjust the seatback, see Reclining Seatbacks 0 35.
To adjust the lumbar support, see Lumbar Adjustment 0 35.
Reclining Seatbacks
{ Warning
Sitting in a reclined position when the vehicle is in motion can result in
serious injury or death in a crash. The shoulder belt will not be against your
body. Instead, it will be in front of you. In a crash, you could go into it,
receiving neck or other injuries. The lap belt could go up over your abdomen.
The belt forces would be there, not at your pelvic bones. This could cause
serious internal injuries. For proper protection when the vehicle is in
motion, have the seatback upright. Then sit well back in the seat and wear the
seat belt properly.
Seats and Restraints 35 Lumbar Adjustment
Do not have a seatback reclined if the vehicle is moving.
· Press and hold the front or rear of the control to increase or decrease
lumbar support.
· If equipped, press and hold the top or bottom of the control to raise or
lower lumbar support.
· Move the control back to recline. · Move the control forward to raise.
36 Seats and Restraints
Uplevel Seat Adjustment
To adjust lumbar support. · Rotate the center of the control to scroll to
lumbar support on the infotainment display. · Press T or S to adjust lumbar
forward or
rearward. · Press y or z to adjust lumbar up or down. Bolster Support To
adjust bolster support, if equipped: · Rotate the center of the control to
scroll to
bolster support on the infotainment display. · Press T or S to adjust the
bolster outward or
inward.
Cushion Length To adjust cushion length, if equipped: · Rotate the center of
the control to scroll to
cushion length on the infotainment display. · Press T or S to adjust the
bolster outward or
inward.
Memory Seats
Overview If equipped, the memory seat feature allows drivers to save their
unique driving positions and a shared exit position. See “Saving Seating
Positions” later in this section. The saved positions can be recalled manually
by all
drivers. See “Manually Recalling Seating Positions” later in this section.
Drivers with remote key 1 and 2 can also recall them automatically. See “Auto
Seat Entry Memory Recall” or “Auto Seat Exit Memory Recall” later in this
section. To enable automatic recalls, turn on Seat Entry Memory and/or Seat
Exit Memory. See “Enabling Automatic Recalls” later in this section. The
memory recalls may be canceled at any time during the recall. See “Cancel
Memory Seating Recalls” later in this section.
Identifying Driver Number
The vehicle identifies the current driver by their remote key number 18. The
current remote key number may be identified by the Driver Information Center
(DIC) welcome message, “You are driver x for memory recalls.” This message is
displayed the first few times the vehicle is turned on when a different remote
key is used. For Seat Entry Memory to work properly, save positions to the 1
or 2 memory button matching the driver number of this welcome message. To aid
in identifying remote key IDs, it is recommended to only carry one
remote key when entering the vehicle. Perform the following if the welcome
message is not displayed:
1. Move all remote keys away from the vehicle.
2. Turn the vehicle on with another remote key. A DIC welcome message should
display indicating the driver number of the other remote key. Turn the vehicle
off and remove the other remote key from the vehicle.
3. Turn the vehicle on with the initial remote key. The DIC welcome message
should display the driver number of the initial remote key.
Saving Seating Positions
Read these instructions completely before saving memory positions.
To save preferred driving positions to 1 and 2:
1. Turn the vehicle on. A DIC welcome message may indicate the driver number
of the current remote key. See “Identifying Driver Number” previously in this
section.
2. Adjust all available memory features to the desired driving position.
3. Press and release SET; a chime will sound.
4. Immediately upon releasing SET, press and hold memory button 1 or 2
matching the current driver’s remote key number until two chimes sound. If too
much time passes between releasing SET and pressing 1 or 2, the two chimes
will not sound indicating memory position were not saved. Repeat Steps 3 and 4
to try again.
5. Repeat Steps 14 for the other remote key 1 or 2 using the other 1 or 2
memory button.
It is recommended to save the preferred driving positions to both 1 and 2 if
you are the only driver. To save the common exit seating position to B that is
used by all drivers for Manually Recalling Seating Positions and Auto Seat
Exit Memory Recall features, repeat Steps 14 using B, the exit button.
Manually Recalling Seating Positions
Press and hold 1, 2, or B button until the recall is complete, to recall the
positions previously saved to that button.
Seats and Restraints 37
Manual Memory recall movement for 1, 2 or B buttons may be initiated and will
complete to the saved memory position if the vehicle is in or out of P (Park).
Enabling Automatic Recalls
· Seat Entry Memory moves the driver seat to the selected 1 or 2 position when
the vehicle is started. Select Settings > Vehicle > Seating Position > Seat
Entry Memory > ON or OFF. See “Auto Seat Entry Memory Recall” later in this
section.
· Seat Exit Memory moves the driver seat to the preferred exit position of the
B button when the vehicle is turned off and the door is opened. Select
Settings > Vehicle > Seating Position > Seat Exit Memory > ON or OFF. See
“Auto Seat Exit Memory Recall” later in this section.
Auto Seat Entry Memory Recall
Seat Entry Memory will automatically begin movement to the seating positions
of the 1 or 2 button corresponding to the driver’s remote key number 1 or 2
detected by the vehicle when:
· The vehicle is turned ON.
38 Seats and Restraints
· Seating positions have been previously saved to the same 1 or 2 button. See
“Saving Seating Positions” previously in this section.
· Seat Entry Memory is enabled. See “Enabling Automatic Recalls” previously in
this section.
· The vehicle is in P(Park).
Seat Entry Memory Recall will continue if the vehicle is shifted out of
P(Park) prior to reaching the saved memory position.
If the saved memory seat position does not automatically recall, verify the
recall is enabled. See “Enabling Automatic Recalls” previously in this
section.
If the memory seat recalls to the wrong position, the driver’s remote key
number 1 or 2 may not match the memory button number positions they were saved
to. Try the other remote key or try saving the positions to the other 1 or 2
memory button. See “Saving Seating Positions” previously in this section.
Automatic Seat Entry Memory recalls are only available for driver’s remote key
numbers 1 and 2. Remote keys 38 will not provide Seat Entry Memory recalls.
Auto Seat Exit Memory Recall
Seat Exit Memory will begin movement to the seating position of the B button
when: · The vehicle is turned off and the driver door is
open or opened within a short time. · A seating position has been previously
been
saved to the B memory button. See “Saving Seating Positions” previously in
this section. · Seat Exit Memory is enabled. See “Enabling Automatic Recalls”
previously in this section. · The vehicle is in P(Park). Seat Exit Memory
recall will continue if the vehicle is shifted out of P(Park) prior to
reaching the saved memory position. Seat Exit Memory is not linked to the
driver’s remote key. The seating position saved to B is used for all drivers.
Cancel Memory Seating Recalls
· During any memory recall: Press a power seat control Press SET memory button
· During Manual memory recall: Release 1, 2, or B memory button
· During Auto Seat Entry Memory Recall:
Turn the vehicle off Press SET, 1, 2, or B memory buttons · During Auto Seat
Exit Memory Recall: Press SET, 1, 2, or B memory buttons
Obstructions
If something has blocked the seat while recalling a memory position, the
recall may stop. Remove the obstruction and try the recall again. If the
memory position still does not recall, see your dealer.
Heated and Ventilated Front Seats
{ Warning
If temperature change or pain to the skin cannot be felt, the seat heater may
cause burns. To reduce the risk of burns, use care when using the seat heater,
especially for long periods of time. Do not place anything on the seat that
insulates against heat, such as a blanket, cushion, cover, or similar item.
This may cause the seat heater to overheat. An overheated seat heater may
cause a burn or may damage the seat.
Heated and Ventilated Seat Buttons Shown, Heated Seat Buttons Similar
Heated and ventilated seat control switches are located on the climate control
system. To operate, the vehicle must be on.
Press M or L to heat the driver or passenger seatback and cushion.
Press C or {, if available, to ventilate the driver or passenger seat. A
ventilated seat has a fan that pulls or pushes air through the seat. The air
is not cooled.
Press the seat heated and ventilated seat control switches:
Once – The HI setting (three indicators on)
Twice – The MID setting (two indicators on)
Three times – The LO setting (one indicator on)
Four times – The OFF setting (no indicators on)
If the heated seats are on high, the level may automatically be lowered after
approximately 30 minutes.
The passenger seat may take longer to heat up.
Auto Heated and Ventilated Seats
When the vehicle is on, the Auto Heated and Ventilated Seats feature, if
equipped, will automatically activate the heated or ventilated seats at the
level required by the vehicle’s interior temperature.
The active high, medium, low, or off heated or ventilated seat level will be
indicated by the manual heated or ventilated seat buttons on the door panel.
Use the manual heated or ventilated seat buttons on the door panel to turn
auto heated or ventilated seats off. If the passenger seat is unoccupied, the
auto heated or ventilated seats feature will not activate that seat. To enable
or disable auto heated or ventilated seats, select Settings > Vehicle >
Climate and Air Quality > Cooled/Ventilated Seats on Startup or Heated Seats
on Startup.
Seats and Restraints 39
Remote Start Heated and Ventilated Seats
During a remote start, the heated or ventilated seats, if equipped, can be
turned on automatically. When it is cold outside, the heated seats turn on,
and when it is hot outside, the ventilated seats turn on. If the auto heated
or ventilated seats feature, if equipped, is not turned on, the heated or
ventilated seats may be canceled when the vehicle is turned on. If necessary,
press the heated or ventilated seat button to use the heated or ventilated
seats after the vehicle is started.
The heated or ventilated seat indicator lights may turn on during a remote
start.
The temperature performance of an unoccupied seat may be reduced. This is
normal.
To enable or disable remote start heated or ventilated seats, select Settings
Vehicle > Remote Lock, Unlock, and Start > Remote Start Auto Heat Seats or Remote Start Auto Cool Seats > ON or OFF. See Remote Start 0 12.
40 Seats and Restraints
Rear Seats
Rear Seats
Rear Seat Reminder
The message REAR SEAT REMINDER LOOK IN REAR SEAT displays under certain
conditions indicating there may be an item or passenger in the rear seat.
Check before exiting the vehicle.
This feature will activate when a second row door is opened while the vehicle
is on or up to 10 minutes before the vehicle is turned on. There will be an
alert when the vehicle is turned off. The alert does not directly detect
objects in the rear seat; instead, under certain conditions, it detects when a
rear door is opened and closed, indicating that there may be something in the
rear seat.
The feature is active only once each time the vehicle is turned on and off,
and will require reactivation by opening and closing the second row doors.
There may be an alert even when there is nothing in the rear seat; for
example, if a child entered the vehicle through the rear door and left the
vehicle without the vehicle being shut off.
The feature can be turned on or off. Select Settings > Vehicle > Rear Seat
Reminder > ON or OFF. Reclining the Seatback To recline the seatback:
1. Pull the reclining seatback handle. A tab near the seatback handle raises
when the seatback is unlocked.
2. Move the seatback to the desired position, and then release the handle to
lock the seatback in place.
3. Push and pull on the seatback to make sure it is locked.
Folding the Seatback Either side of the seatback can be folded for more cargo
space. Fold a seatback only when the vehicle is not moving.
Notice Folding a rear seat with the seat belts still fastened may cause damage
to the seat or the seat belts. Always unbuckle the seat belts and return them
to their normal stowed position before folding a rear seat. To fold the
seatback:
1. Pull the handle on top of the seatback to unlock it.
2. Fold the seatback forward. Repeat the steps to fold the other seatback, if
desired.
If equipped, the rear seatbacks can also be folded forward by pressing and
holding the switches located in the rear cargo area. The left switch folds the
left seatback, and the right switch folds the right seatback.
Raising the Seatback
{ Warning
If either seatback is not locked, it could move forward in a sudden stop or
crash. That could cause serious injury or death in a crash to the person
sitting there. Always push and pull on the seatbacks to be sure they are
locked.
{ Warning
A seat belt that is improperly routed, not properly attached, or twisted will
not provide the protection needed in a crash. The person wearing the belt
could be seriously injured or killed. After raising the rear seatback, always
check to be sure that the seat belts are properly routed and attached, and are
not twisted.
To raise a seatback: 1. Lift the seatback up and push it rearward to lock it
in place. A tab near the seatback handle retracts when the seatback is locked
in place.
Seats and Restraints 41
2. Push and pull the top of the seatback to be sure it is locked into
position.
3. Repeat the steps to raise the other seatback, if necessary.
When the seat is not in use, it should be kept in the upright, locked
position.
Heated Rear Seats
{ Warning
If temperature change or pain to the skin cannot be felt, the seat heater may
cause burns. See the Warning under Heated and Ventilated Front Seats 0 38.
42 Seats and Restraints
If equipped, the buttons are on the rear of the center console.
With the vehicle on, press M or L to heat the left or right outboard seat
cushion and seatback. An indicator on the rear climate control display appears
when this feature is on.
Press the button once for the highest setting. With each press of the button,
the seat will change to the next lower setting, and then to the off setting.
The indicator lights next to the buttons indicate three for the highest
setting and one for the lowest.
If the heated seats are on high for approximately 30 minutes, their level may
automatically be lowered.
Remote Start Heated Seats
If equipped, the heated seats will turn on automatically during a remote start
if it is cold outside. The heated seat indicators may come on during this
operation. The heated seats may cancel when the vehicle is turned on. These
features can be manually selected with the heated seat buttons after the
vehicle is turned on.
The temperature performance of an unoccupied seat may be reduced. This is
normal.
To enable or disable remote start heated seats, select Settings > Vehicle >
Remote Lock, Unlock, and Start > Remote Start Auto Heat Seats > ON or OFF. See
Remote Start 0 12.
Seat Belts
This SeatBelts section describes how to use seat belts properly, and some
things not to do.
{ Warning
Do not let anyone ride where a seat belt cannot be worn properly. In a crash,
if you or your passenger(s) are not wearing seat belts, injuries can be much
worse than if you are wearing seat belts. You can be seriously injured or
killed by hitting things inside the vehicle harder or by being ejected from
the vehicle. In addition, anyone who is not buckled up can strike other
passengers in the vehicle.
It is extremely dangerous to ride in a cargo area, inside or outside of a
vehicle. In a collision, passengers riding in these areas are more likely to
be seriously injured or killed. Do not allow passengers to ride in any area of
the vehicle that is not equipped with seats and seat belts.
Always wear a seat belt, and check that all passenger(s) are restrained
properly too.
This vehicle has indicators as a reminder to buckle the seat belts. See Seat
Belt Reminders 0 91.
Why Seat Belts Work
When riding in a vehicle, you travel as fast as the vehicle does. If the
vehicle stops suddenly, you keep going until something stops you. It could be
the windshield, the instrument panel, or the seat belts. When you wear a seat
belt, you and the vehicle slow down together. There is more time to stop
because you stop over a longer distance and, when worn properly, your
strongest bones take the forces from the seat belts. That is why wearing seat
belts makes such good sense.
Questions and Answers About Seat Belts
Q: Will I be trapped in the vehicle after a crash if I am wearing a seat belt?
A: You could be– whether you are wearing a seat belt or not. Your chance of
being conscious during and after a crash, so you can unbuckle and get out, is
much greater if you are belted.
Q: If my vehicle has airbags, why should I have to wear seat belts?
A: Airbags are supplemental systems only. They work with seat belts– not
instead of them. Whether or not an airbag is provided, all occupants still
have to buckle up to get the most protection.
Also, in nearly all states and in all Canadian provinces, the law requires
wearing seat belts.
Buckle To Drive
If equipped, this feature delays the vehicle from shifting out of P(Park) when
the driver seat belt is not buckled. The Buckle to Drive feature must be
turned ON in the infotainment system to
Seats and Restraints 43
work. To turn the Buckle to Drive feature on or off, select Settings > Vehicle
Buckle to Drive. See Teen Driver 0 142, if equipped.
If the vehicle is on and the brake pedal is pressed with the vehicle in P (Park) but the driver seat belt is not buckled, a message displays in the Driver Information Center(DIC) and the vehicle will be delayed from shifting out of P(Park). Buckle the driver seat belt to clear the message and shift out of P(Park). Shifting from P (Park) will be delayed once for each time the vehicle is started.
On some models, Buckle to Drive may also delay shifting out of P (Park) if a front passenger seat belt is unbuckled. A message displays in the DIC. Buckle the front passenger seat belt to clear the message and shift out of P (Park). This feature may delay the vehicle from shifting out of P(Park) if an object, such as a briefcase, handbag, grocery bag, laptop, or other electronic device, is on the front passenger seat. If this happens, remove the object from the seat or buckle the seat belt to shift out of P(Park).
If the driver, or on some vehicles, the present front passenger remains unbuckled, the DIC message will turn off after several seconds and
44 Seats and Restraints
the vehicle can be shifted out of P(Park). See “Seat Belts” and “Child
Restraints” in the Index for information about the importance of proper
restraint use.
If the driver seat belt or the front passenger seat belt is unbuckled when
driving, the seat belt reminder chime and light(s) will come on. See Seat Belt
Reminders 0 91. This feature may not function properly if the airbag readiness
light is on. See Airbag Readiness Light 0 92.
How to Wear Seat Belts Properly
Follow these rules for everyone’s protection.
There are additional things to know about seat belts and children, including
smaller children and infants. If a child will be riding in the vehicle, see
Older Children 0 60 or Infants and Young Children 0 61. Review and follow the
rules for children in addition to the following rules.
It is very important for all occupants to buckle up. Statistics show that
unbelted people are hurt more often in crashes than those who are wearing seat
belts.
There are important things to know about wearing a seat belt properly.
· Sit up straight and always keep your feet on the floor in front of you (if
possible).
· Wear the lap part of the belt low and snug on the hips, just touching the
thighs. In a crash, this applies force to the strong pelvic bones and you
would be less likely to slide under the lap belt. If you slid under it, the
belt would apply force on your abdomen. This could cause serious or even fatal
injuries.
· Wear the shoulder belt over the shoulder and across the chest. These parts
of the body are best able to take belt restraining forces. The shoulder belt
locks if there is a sudden stop or crash.
{ Warning
You can be seriously injured, or even killed, by not wearing your seat belt
properly.
Seats and Restraints 45
Never allow the lap or shoulder belt to become loose or twisted.
Never wear the shoulder belt under both arms or behind your back.
Always use the correct buckle for your seating position.
Never route the lap or shoulder belt over an armrest.
{ Warning
The seat belt can be pinched if it is routed under plastic trim on the seat,
such as trim around the rear seatback folding handle or side airbag. Never
allow seat belts to be routed under plastic trim pieces. In a crash, pinched
seat belts might not provide adequate protection, resulting in serious injury
or death to the occupant.
46 Seats and Restraints
{ Warning
You can be seriously injured or killed if the shoulder belt is worn behind
your back, under your legs, or wrapped around your neck. The shoulder belt can
tighten but cannot be loosened if it is locked. The shoulder belt locks when
it is pulled all the way out of the retractor. It unlocks when the shoulder
belt is allowed to go all the way back into the retractor, but it cannot do
this if it is wrapped around you. You may have to cut the seat belt if it is
locked and tightened around you.
Lap-Shoulder Belt
All seating positions in the vehicle have a lapshoulder belt. The following
instructions explain how to wear a lap-shoulder belt properly.
1. Adjust the seat, if the seat is adjustable, so you can sit up straight. To
see how, see “Seats” in the Index.
2. Pick up the latch plate and pull the belt across you. Do not let it get
twisted.
The lap-shoulder belt may lock if you pull the belt across you very quickly.
If this happens, let the belt go back slightly to unlock it. Then pull the
belt across you more slowly.
If the shoulder portion of a passenger belt is pulled out all the way, the
child restraint locking feature may be engaged. See Child Restraint Systems 0
63. If this occurs, let the belt go back all the way and start again. If the
locking feature stays engaged after letting the belt go back to stowed
position
on the seat, move the seat rearward or recline the seat until the shoulder
belt retractor lock releases. If the shoulder portion of the driver belt is
pulled out all the way, the shoulder belt retractor lock feature may be
engaged. If this happens, let the belt go back all the way and start again. If
the locking feature stays engaged after letting the belt go back to stowed
position on the seat, move the seat rearward or recline the seat until the
shoulder belt retractor lock releases.
If the webbing locks in the latch plate before it reaches the buckle, tilt the
latch plate flat to unlock.
3. Push the latch plate into the buckle until it clicks.
Pull up on the latch plate to make sure it is secure.
Position the release pushbutton on the buckle so that the seat belt could be
quickly unbuckled if necessary.
4. If equipped with a shoulder belt height adjuster, move it to the height
that is right for you. See “Shoulder Belt Height Adjuster” later in this
section for instructions on use and important safety information.
5. To make the lap part tight, pull up on the shoulder belt.
Seats and Restraints 47
To unlatch the belt, push the release pushbutton on the buckle. The belt
should return to its stowed position.
Always stow the seat belt slowly. If the seat belt webbing returns quickly to
the stowed position, the retractor may lock and cannot be pulled out. If this
happens, pull the seat belt straight out firmly to unlock the webbing, and
then release it. If the webbing is still locked in the retractor, see your
dealer.
Before a door is closed, be sure the seat belt is out of the way. If a door is
slammed against a seat belt, damage can occur to both the seat belt and the
vehicle.
Shoulder Belt Height Adjuster
The vehicle has a shoulder belt height adjuster for the driver and front
outboard passenger seating positions.
Adjust the height so the shoulder portion of the belt is on the shoulder and
not falling off of it. The belt should be close to, but not contacting, the
neck. Improper shoulder belt height adjustment could reduce the effectiveness
of the seat belt in a crash. See How to Wear Seat Belts Properly 0 44.
48 Seats and Restraints
Press the release button and move the height adjuster to the desired position.
The adjuster can be moved up by pushing the slide/trim up. After the adjuster
is set to the desired position, try to move it down without pressing the
release button to make sure it has locked into position. Seat Belt
Pretensioners This vehicle has seat belt pretensioners for front row and
second row outboard occupants. Although the seat belt pretensioners cannot be
seen, they are part of the seat belt assembly. They can help tighten the seat
belts during the early stages of a moderate to severe frontal, near frontal,
or rear crash if the threshold
conditions for pretensioner activation are met. Seat belt pretensioners can
also help tighten the seat belts in a side crash or a rollover event.
Pretensioners work only once. If the pretensioners activate in a crash, the
pretensioners and probably other parts of the vehicle seat belt system will
need to be replaced. See Replacing Seat Belt System Parts after a Crash 0 49.
Do not sit on the outboard seat belt while entering or exiting the vehicle or
at any time while sitting in the seat. Sitting on the seat belt can damage the
webbing and hardware.
Seat Belt Use During Pregnancy
Seat belts work for everyone, including pregnant women. Like all occupants,
they are more likely to be seriously injured if they do not wear seat belts.
A pregnant woman should wear a lap-shoulder belt, and the lap portion should
be worn as low as possible, below the rounding, throughout the pregnancy.
The best way to protect the fetus is to protect the mother. When a seat belt
is worn properly, it is more likely that the fetus will not be hurt in a
crash. For pregnant women, as for anyone, the key to making seat belts
effective is wearing them properly.
Safety System Check
Periodically check the seat belt reminder, seat belts, buckles, latch plates,
retractors, shoulder belt height adjusters (if equipped), and seat belt
anchorages to make sure they are all in working order. Look for any other
loose or damaged seat belt system parts that might keep a seat belt system
from performing properly. See your dealer to have it repaired. Torn, frayed,
or twisted seat belts may not protect you in a crash. Torn or frayed seat
belts can rip apart under impact forces. If a belt is torn or frayed, have it
replaced immediately. If a belt is twisted, it may be possible to untwist by
reversing the latch plate on the webbing. If the twist cannot be corrected,
ask your dealer to fix it.
Make sure the seat belt reminder light is working. See Seat Belt Reminders 0
91.
Keep seat belts clean and dry. See Seat Belt Care 0 49.
Seat Belt Care
Keep belts clean and dry.
Seat belts should be properly cared for and maintained.
Seat belt hardware should be kept dry and free of dust or debris. As
necessary, exterior hard surfaces and seat belt webbing may be lightly cleaned
with mild soap and water. Ensure there
is not excessive dust or debris in the mechanism. If dust or debris exists in
the system please see the dealer. Parts may need to be replaced to ensure
proper functionality of the system.
{ Warning
Do not bleach or dye seat belt webbing. It may severely weaken the webbing. In
a crash, they might not be able to provide adequate protection which could
result in death or serious injury. Clean and rinse seat belt webbing only with
mild soap and lukewarm water. Allow the webbing to dry.
Seats and Restraints 49
Replacing Seat Belt System Parts after a Crash
{ Warning
A crash can damage the seat belt system in the vehicle. A damaged seat belt
system may not properly protect the person using it, resulting in serious
injury or even death in a crash. To help make sure the seat belt systems are
working properly after a crash, have them inspected and any necessary
replacements made as soon as possible.
After a minor crash, replacement of seat belts may not be necessary. But the
seat belt assemblies that were used during any crash may have been stressed or
damaged. See your dealer to have the seat belt assemblies inspected or
replaced. New parts and repairs may be necessary even if the seat belt system
was not being used at the time of the crash.
50 Seats and Restraints
Have the seat belt pretensioners checked if the vehicle has been in a crash,
or if the airbag readiness light stays on after you start the vehicle or while
you are driving. See Airbag Readiness Light 0 92.
Airbag System
The AirbagSystem vehicle has the following airbags: · A frontal airbag for the
driver · A frontal airbag for the front outboard
passenger · A knee airbag for the driver · A knee airbag for the front
outboard
passenger · A seat-mounted side impact airbag for the
driver · A seat-mounted side impact airbag for the
front outboard passenger · A roof-rail airbag for the driver and the
passenger seated directly behind the driver · A roof-rail airbag for the front
outboard
passenger and the passenger seated directly behind the front outboard
passenger All vehicle airbags have the word AIRBAG on the trim or on a label
near the deployment opening.
For frontal airbags, the word AIRBAG is on the center of the steering wheel
for the driver and on the instrument panel for the front outboard passenger.
For knee airbags, the word AIRBAG is on the lower part of the instrument
panel.
For seat-mounted side impact airbags, the word AIRBAG is on the side of the
seatback or side of the seat closest to the door.
For roof-rail airbags, the word AIRBAG is on the ceiling or trim.
Airbags are designed to supplement the protection provided by seat belts. Even
though today’s airbags are also designed to help reduce the risk of injury
from the force of an inflating bag, all airbags must inflate very quickly to
do their job.
Here are the most important things to know about the airbag system:
{ Warning
You can be severely injured or killed in a crash if you are not wearing your
seat belt, even with airbags. Airbags are designed to work with seat belts,
not replace them. Also, airbags are not designed to inflate in every crash. In
some crashes seat belts are the only restraint. See When Should an Airbag
Inflate? 0 52.
Wearing your seat belt during a crash helps reduce your chance of hitting
things inside the vehicle or being ejected from it. Airbags are “supplemental
restraints” to the seat belts. Everyone in the vehicle should wear a seat belt
properly, whether or not there is an airbag for that person.
{ Warning
Because airbags inflate with great force and faster than the blink of an eye,
anyone who is up against, or very close to, any airbag when it inflates can be
seriously injured or killed. Do not sit unnecessarily close to any airbag, as
you would be if sitting on the edge of the seat or leaning forward. Seat belts
help keep you in position before and during a crash. Always wear a seat belt,
even with airbags. The driver should sit as far back as possible while still
maintaining control of the vehicle. The seat belts and the front outboard
passenger airbags are most effective when you are sitting well back and
upright in the seat with both feet on the floor.
Occupants should not lean on or sleep against the door or side windows in
seating positions with seat-mounted side impact airbags and/or roof-rail
airbags.
{ Warning
Children who are up against, or very close to, any airbag when it inflates can
be seriously injured or killed. Always secure children properly in the
vehicle. To read how, see Older Children 0 60 or Infants and Young Children 0
61.
Seats and Restraints 51 Where Are the Airbags?
There is an airbag readiness light on the instrument cluster, which shows the
airbag symbol.
The system checks the airbag electrical system for malfunctions. The light
tells you if there is an electrical problem. See Airbag Readiness Light 0 92.
The driver frontal airbag is in the center of the steering wheel.
The front outboard passenger frontal airbag is in the passenger side
instrument panel.
52 Seats and Restraints
The driver knee airbag is below the steering column. The front outboard
passenger knee airbag is below the glove box.
Driver Side Shown, Passenger Side Similar
The driver and front outboard passenger seatmounted side impact airbags are in
the side of the seatbacks closest to the door.
Driver Side Shown, Passenger Side Similar The roof-rail airbags for the
driver, front outboard passenger, and second row outboard passengers are in
the ceiling above the side windows.
{ Warning
If something is between an occupant and an airbag, the airbag might not
inflate properly or it might force the object into that person causing severe
injury or even death. The path of an inflating airbag must be kept clear. Do
not put anything between an occupant and an airbag, and do not attach or put
anything on the steering wheel hub or on or near any other airbag covering.
Do not use seat accessories that block the inflation path of a seat-mounted
side impact airbag.
Never secure anything to the roof of a vehicle with roof-rail airbags by
routing a rope or tiedown through any door or window opening. If you do, the
path of an inflating roof-rail airbag will be blocked.
When Should an Airbag Inflate?
This vehicle is equipped with airbags. See Airbag System 0 50. Airbags are
designed to inflate if the impact exceeds the specific airbag system’s
deployment threshold. Deployment thresholds are used to predict how severe a
crash is likely to be in time for the airbags to inflate and help restrain the
occupants. The vehicle has electronic sensors that help the airbag system
determine the severity of the impact. Deployment thresholds can vary with
specific vehicle design.
Frontal airbags are designed to inflate in moderate to severe frontal crashes
to help reduce the potential for severe injuries, mainly to the driver’s or
front outboard passenger’s head and chest.
Whether the frontal airbags will or should inflate is not based primarily on
how fast the vehicle is traveling. It depends on what is hit, the direction of
the impact, and how quickly the vehicle slows down.
Frontal airbags may inflate at different crash speeds depending on whether the
vehicle hits an object straight on or at an angle, and whether the object is
fixed or moving, rigid or deformable, narrow or wide.
Frontal airbags are not intended to inflate during vehicle rollovers, in rear
impacts, or in many side impacts.
In addition, the vehicle has advanced technology frontal airbags. Advanced
technology frontal airbags adjust the restraint according to crash severity.
Knee airbags are designed to inflate in moderate to severe frontal impacts.
Knee airbags are not designed to inflate during vehicle rollovers, in rear
impacts, or in many side impacts.
Seat-mounted side impact airbags are designed to inflate in moderate to severe
side crashes depending on the location of the impact. These airbags may also
inflate in some moderate to severe frontal impacts. Seat-mounted side impact
airbags are not designed to inflate in rollovers or rear impacts. A seat-
mounted side impact airbag is designed to inflate on the side of the vehicle
that is struck.
Roof-rail airbags are designed to inflate in moderate to severe side crashes
depending on the location of the impact. In addition, these roof-rail airbags
may inflate during a rollover or in a severe frontal impact. Roof-rail airbags
are not designed to inflate in rear impacts. Both roof-rail airbags may
inflate when either side of
Seats and Restraints 53
the vehicle is struck or if the sensing system predicts that the vehicle is
about to roll over on its side, or in a severe frontal impact. In any
particular crash, no one can say whether an airbag should have inflated simply
because of the vehicle damage or repair costs.
What Makes an Airbag Inflate?
In a deployment event, the sensing system sends an electrical signal
triggering a release of gas from the inflator. Gas from the inflator fills the
airbag causing the bag to break out of the cover. The inflator, the airbag,
and related hardware are all part of the airbag module.
For airbag locations, see Where Are the Airbags? 0 51.
How Does an Airbag Restrain?
In moderate to severe frontal collisions, even belted occupants can contact
the steering wheel or the instrument panel. In moderate to severe side
collisions, even belted occupants can contact the inside of the vehicle.
Airbags supplement the protection provided by seat belts by distributing the
force of the impact more evenly over the occupant’s body.
54 Seats and Restraints
Rollover capable roof-rail airbags are designed to help contain the head and
chest of occupants in the outboard seating positions in the first and second
rows. The rollover capable roof-rail airbags are designed to help reduce the
risk of full or partial ejection in rollover events, although no system can
prevent all such ejections.
But airbags would not help in many types of collisions, primarily because the
occupant’s motion is not toward those airbags. See When Should an Airbag
Inflate? 0 52.
Airbags should never be regarded as anything more than a supplement to seat
belts.
What Will You See after an Airbag Inflates?
After frontal, knee, and seat-mounted side impact airbags inflate, they
quickly deflate, so quickly that some people may not even realize the airbags
inflated. Roof-rail airbags may still be at least partially inflated for some
time after they inflate. Some components of the airbag module may be hot for
several minutes. For location of the airbags, see Where Are the Airbags? 0 51.
The parts of the airbag that come into contact with you may be warm, but not
too hot to touch. There may be some smoke and dust coming from the vents in
the deflated airbags. Airbag inflation does not prevent people from leaving
the vehicle.
{ Warning
When an airbag inflates, there may be dust in the air. This dust could cause
breathing problems for people with a history of asthma or other breathing
trouble. To avoid this, everyone in the vehicle should get out as soon as it
is safe to do so. If you have breathing problems but cannot get out of the
vehicle after an airbag inflates, then get fresh air by opening a window or a
door. If you experience breathing problems following an airbag deployment, you
should seek medical attention.
The vehicle has a feature that may automatically unlock the doors, turn on the
interior lamps and hazard warning flashers after the airbags inflate. The
feature may also activate, without airbag inflation, after an event
that exceeds a predetermined threshold. After turning the vehicle off and then
on again, the doors can be locked, the interior lamps can be turned off, and
the hazard warning flashers can be turned off using the controls for those
features. If any of these systems are damaged in the crash they may not
operate as normal.
{ Warning
A crash severe enough to inflate the airbags may have also damaged important
functions in the vehicle, such as the brake and steering systems, etc. Even if
the vehicle appears to be drivable after a moderate crash, there may be
concealed damage that could make it difficult to safely operate the vehicle,
leading to serious injury or death.
Use caution if attempting to restart the vehicle after a crash has occurred.
Plug-in vehicles have a high voltage battery and a standard 12-volt battery.
If an airbag inflates or the vehicle has been in a crash, the sensing system
may shut down the high voltage system. When this occurs, the high
voltage battery is disconnected and the vehicle will not start. Before the
vehicle can be operated again, it must be serviced.
In many crashes severe enough to inflate the airbag, windshields are broken by
vehicle deformation. Additional windshield breakage may also occur from the
front outboard passenger airbag.
· Airbags are designed to inflate only once. After an airbag inflates, you
will need some new parts for the airbag system. If you do not get them, the
airbag system will not be there to help protect you in another crash. A new
system will include airbag modules and possibly other parts. The service
manual for the vehicle covers the need to replace other parts.
· The vehicle has a crash sensing and diagnostic module which records
information after a crash. See Vehicle Data Recording and Privacy 0 323 and
Event Data Recorders 0 324.
· Let only qualified technicians work on the airbag system. Improper service
can mean that an airbag system will not work properly. See your dealer for
service.
Passenger Sensing System
The vehicle has a passenger sensing system for the front outboard passenger
position. The passenger airbag status indicator will light on the overhead
console when the vehicle is started.
The words ON and OFF, and the symbols for on and off, will be visible during
the system check. When the system check is complete, either the word ON or
OFF, and the symbol for on or off, will be visible. See Passenger Airbag
Status Indicator 0 93. The passenger sensing system turns off the front
outboard passenger frontal airbag and knee airbag under certain conditions. No
other airbag is affected by the passenger sensing system. The passenger
sensing system works with sensors that are part of the front outboard
passenger seat and seat belt. The sensors are
Seats and Restraints 55
designed to detect the presence of a properly seated occupant and determine if
the front outboard passenger frontal airbag and knee airbag should be allowed
to inflate or not.
According to accident statistics, children are safer when properly secured in
a rear seat in the correct child restraint for their weight and size.
Whenever possible, children aged 12 and under should be secured in a rear
seating position.
Never put a rear-facing child seat in the front. This is because the risk to
the rear-facing child is so great if the airbag inflates.
56 Seats and Restraints
{ Warning
A child in a rear-facing child restraint can be seriously injured or killed if
the passenger frontal airbag inflates. This is because the back of the rear-
facing child restraint would be very close to the inflating airbag. A child in
a forward-facing child restraint can be seriously injured or killed if the
passenger frontal airbag inflates and the passenger seat is in a forward
position.
Even if the passenger sensing system has turned off the front outboard
passenger airbag(s), no system is fail-safe. No one can guarantee that an
airbag will not deploy under some unusual circumstance, even though the
airbag(s) are off.
Never put a rear-facing child restraint in the front seat, even if the airbag
is off. If securing a forward-facing child restraint in the front outboard
passenger seat, always move the seat as far back as it will go. It is better
to secure child restraints in the rear seat. Consider using another vehicle to
transport the child when a rear seat is not available.
The passenger sensing system is designed to turn off the front outboard
passenger frontal airbag and knee airbag if:
· The front outboard passenger seat is unoccupied.
· The system determines an infant is present in a child restraint.
· A front outboard passenger takes his/her weight off of the seat for a period
of time.
When the passenger sensing system has turned off the front outboard passenger
frontal airbag and knee airbag, the OFF indicator will light and stay lit as a
reminder that the airbags are off. See Passenger Airbag Status Indicator 0 93.
The passenger sensing system is designed to turn on the front outboard
passenger frontal airbag and knee airbag any time the system senses that a
person of adult size is sitting properly in the front outboard passenger seat.
When the passenger sensing system has allowed the airbags to be enabled, the
ON indicator will light and stay lit as a reminder that the airbags are
active.
For some children, including children in child restraints, and for very small
adults, the passenger sensing system may or may not turn
off the front outboard passenger frontal airbag and knee airbag, depending
upon the person’s seating posture and body build. Everyone in the vehicle who
has outgrown child restraints should wear a seat belt properly –whether or not
there is an airbag for that person.
{ Warning
If the airbag readiness light ever comes on and stays on, it means that
something may be wrong with the airbag system. To help avoid serious injury or
death from an airbag that doesn’t work properly, have the vehicle serviced
right away. See Airbag Readiness Light 0 92 for more information, including
important safety information.
If the On Indicator Is Lit for a Child Restraint
The passenger sensing system is designed to turn off the front outboard
passenger frontal airbag and knee airbag, if the system determines that an
infant is present in a child restraint. If a child restraint has been
installed and the ON indicator is lit:
1. Turn the vehicle off.
2. Remove the child restraint from the vehicle.
3. Remove any additional items from the seat such as blankets, cushions, seat
covers, seat heaters, or seat massagers.
4. Reinstall the child restraint following the directions provided by the
child restraint manufacturer and refer to Securing Child Restraints (With the
Seat Belt in a Rear Outside Seat Position) 0 73 or Securing Child Restraints
(With the Seat Belt in the Front Seat) 0 75.
Make sure the seat belt retractor is locked by pulling the shoulder belt all
the way out of the retractor when installing the child restraint, even if the
child restraint is equipped with a seat belt lock off. When the retractor lock
is set, the belt can be tightened but not pulled out of the retractor.
5. If, after reinstalling the child restraint and restarting the vehicle, the
ON indicator is still lit, turn the vehicle off. Then slightly recline the
vehicle seatback and adjust the
seat cushion, if adjustable, to make sure that the vehicle seatback is not
pushing the child restraint into the seat cushion.
Also make sure the child restraint is not trapped under the vehicle head
restraint. If this happens, adjust the head restraint. See Head Restraints 0
33.
6. Restart the vehicle.
The passenger sensing system may or may not turn off the airbags for a child
in a child restraint depending upon the child’s size. It is better to secure
the child restraint in a rear seat. Never put a rear-facing child restraint in
the front seat, even if the ON indicator is not lit.
Seats and Restraints 57
If the Off Indicator Is Lit for an Adult-Sized Occupant
If a person of adult size is sitting in the front outboard passenger seat, but
the OFF indicator is lit, it could be because that person is not sitting
properly in the seat or that the child restraint locking feature is engaged.
Use the following steps to allow the system to detect that person and enable
the front outboard passenger frontal airbag and knee airbag:
1. Turn the vehicle off. 2. Remove any additional material from the
seat, such as blankets, cushions, seat covers, seat heaters, or seat
massagers.
58 Seats and Restraints
3. Place the seatback in the fully upright position.
4. Have the person sit upright in the seat, centered on the seat cushion,
with legs comfortably extended.
5. If the shoulder portion of the belt is pulled out all the way, the child
restraint locking feature will be engaged. This may unintentionally cause the
passenger sensing system to turn the airbag off for some adult-sized
occupants. If this happens, unbuckle the belt, let the belt go back all the
way, and then buckle the belt again without pulling the belt out all the way.
6. Restart the vehicle and have the person remain in this position for twoto
three minutes after the ON indicator is lit.
{ Warning
If the front outboard passenger airbag is turned off for an adult-sized
occupant, the airbag will not be able to inflate and help protect that person
in a crash, resulting in an increased risk of serious injury or even death. An
adult-sized occupant should not ride in the front outboard passenger seat if
the passenger airbag OFF indicator is lit.
Additional Factors Affecting System Operation
Seat belts help keep the passenger in position on the seat during vehicle
maneuvers and braking, which helps the passenger sensing system maintain the
passenger airbag status. See “Seat Belts” and “Child Restraints” in the Index
for additional information about the importance of proper restraint use.
A thick layer of additional material, such as a blanket or cushion, or
aftermarket equipment such as seat covers, seat heaters, and seat massagers
can affect how well the passenger sensing system operates. We recommend that
you do not use seat covers or other aftermarket
equipment except when approved by Acura for your specific vehicle. See Adding
Equipment to the Airbag-Equipped Vehicle 0 59 for more information about
modifications that can affect how the system operates. The ON indicator may be
lit if an object, such as a briefcase, handbag, grocery bag, laptop, or other
electronic device, is put on an unoccupied seat. If this is not desired,
remove the object from the seat.
{ Warning
Stowing articles under the passenger seat or between the passenger seat
cushion and seatback may interfere with the proper operation of the passenger
sensing system.
Servicing the Airbag-Equipped Vehicle
Airbags affect how the vehicle should be serviced. There are parts of the
airbag system in several places around the vehicle. Your dealer and the
service manual have information about
servicing the vehicle and the airbag system. To purchase a service manual, see
Publication Ordering Information 0 322.
{ Warning
For up to 10seconds after the vehicle is turned off and the battery is
disconnected, an airbag can still inflate during improper service. You can be
injured if you are close to an airbag when it inflates. Avoid yellow
connectors. They are probably part of the airbag system. Be sure to follow
proper service procedures, and make sure the person performing work for you is
qualified to do so.
Adding Equipment to the AirbagEquipped Vehicle
Adding accessories that change the vehicle’s frame, bumper system, height,
front end, or side sheet metal may keep the airbag system from working
properly.
The operation of the airbag system can also be affected by changing, including
improperly repairing or replacing, any parts of the following:
· Airbag system, including airbag modules, front or side impact sensors,
sensing and diagnostic module, or airbag wiring
· Front seats, including stitching, seams, or zippers
· Seat belts
· Steering wheel, instrument panel, overhead console, ceiling trim, or pillar
garnish trim
· Inner door seals, including speakers
Your dealer and the service manual have information about the location of the
airbag modules and sensors, sensing and diagnostic module, and airbag wiring
along with the proper replacement procedures.
In addition, the vehicle has a passenger sensing system for the front outboard
passenger position, which includes sensors that are part of the passenger
seat. The passenger sensing system may not operate properly if the original
seat trim is replaced with non-Acura covers, upholstery, or trim; or with
Acura covers, upholstery, or trim designed for a different
Seats and Restraints 59
vehicle. Any object, such as an aftermarket seat heater or a comfort-enhancing
pad or device, installed under or on top of the seat fabric, could also
interfere with the operation of the passenger sensing system. This could
either prevent proper deployment of the passenger airbag(s) or prevent the
passenger sensing system from properly turning off the passenger airbag(s).
See Passenger Sensing System 0 55.
If the vehicle has rollover roof-rail airbags, see Different Size Tires and
Wheels 0 291 for additional important information.
If the vehicle must be modified because you have a disability and have
questions about whether the modifications will affect the vehicle’s airbag
system, or if you have questions about whether the airbag system will be
affected if the vehicle is modified for any other reason, call Customer
Assistance. See Customer Service Information 0 320.
Airbag System Check
The airbag system does not need regularly scheduled maintenance or
replacement. Make sure the airbag readiness light is working. See Airbag
Readiness Light 0 92.
60 Seats and Restraints
{ Warning
If an airbag covering is damaged, opened, or broken, the airbag may not work
properly, leading to possible injury or death. Do not open or break the airbag
coverings. If there are any opened or broken airbag coverings, have the airbag
covering and/or airbag module replaced. For the location of the airbags, see
Where Are the Airbags? 0 51. See your dealer for service.
Replacing Airbag System Parts after a Crash
{ Warning
A crash can damage the airbag systems in the vehicle. A damaged airbag system
may not properly protect you and your passenger(s) in a crash, resulting in
serious injury or even death. To help make sure the airbag systems are working
properly after a crash, have them inspected and any necessary replacements
made as soon as possible.
If an airbag inflates, you will need to replace airbag system parts. See your
dealer for service. If the airbag readiness light stays on after the vehicle
is started or comes on when you are driving, the airbag system may not work
properly. Have the vehicle serviced right away. See Airbag Readiness Light 0
92.
Child Restraints
Older Children
Older children who have outgrown booster seats should wear the vehicle seat
belts. Refer to How to Wear Seat Belts Properly 0 44.
The manufacturer instructions that come with the booster seat state the weight
and height limitations for that booster. Use a booster seat with a lap-
shoulder belt until the child passes the fit test below:
· Sit all the way back on the seat. Do the knees bend at the seat edge? If
yes, continue. If no, return to the booster seat.
· Buckle the lap-shoulder belt. Does the shoulder belt rest on the shoulder?
If yes, continue. If no, return to the booster seat.
· Does the lap belt fit low and snug on the hips, touching the thighs? If yes,
continue. If no, return to the booster seat.
· Can proper seat belt fit be maintained for the length of the trip? If yes,
continue. If no, return to the booster seat.
Q: What is the proper way to wear seat belts?
A: An older child should wear a lap-shoulder belt and get the additional
restraint a shoulder belt can provide. The shoulder belt should not cross the
face or neck. The lap belt should fit snugly below the hips, just touching the
top of the thighs. This applies belt force to the child’s pelvic bones
in a crash. It should never be worn over the abdomen, which could cause severe
or even fatal internal injuries in a crash. According to accident statistics,
children are safer when properly restrained in a rear seating position.
In a crash, children who are not buckled up can strike other people who are
buckled up, or can be thrown out of the vehicle. Older children need to use
seat belts properly.
{ Warning
Never allow more than one child to wear the same seat belt. The seat belt
cannot properly spread the impact forces. In a crash, they can be crushed
together and seriously injured or killed. A seat belt must be used by only one
person at a time.
{ Warning
Never allow a child to wear the seat belt shoulder belt under both arms or
behind their back. A child can be seriously injured by not wearing the lap-
shoulder belt properly. In a crash, the child would not be restrained by the
shoulder belt. The child could move too far forward, increasing the chance of
head and neck injury. The child might also slide under the lap belt. The belt
force would then be applied right on the abdomen. That could cause serious or
fatal injuries. The shoulder belt should go over the shoulder and across the
chest.
Seats and Restraints 61
Infants and Young Children
Everyone in a vehicle needs protection! This includes infants and all other
children. Neither the distance traveled nor the age and size of the traveler
changes the need, for everyone, to use safety restraints. In fact, the law in
every state in the United States and in every Canadian province says children
up to some age must be restrained while in a vehicle.
62 Seats and Restraints
{ Warning
Children can be seriously injured or killed if the shoulder belt is worn
behind their back, under their legs, or wrapped around their neck. The
shoulder belt can tighten but cannot be loosened if it is locked. The shoulder
belt locks when it is pulled all the way out of the retractor. It unlocks when
the shoulder belt is allowed to go all the way back into the retractor, but it
cannot do this if it is wrapped around the child. Never leave children
unattended in a vehicle and never allow children to improperly wear, or play
with, the seat belts.
Every time infants and young children ride in vehicles, they should have the
protection provided by appropriate child restraints. Neither the vehicle seat
belt system nor its airbag system is designed for them. Children who are not
restrained properly can strike other people, or can be thrown out of the
vehicle.
{ Warning
Never hold an infant or a child while riding in a vehicle. Due to crash
forces, an infant or a child will become so heavy it is not possible to hold
it during a crash, and the infant could be seriously injured or killed. For
example, in a crash at only 40 km/h(25mph), a 5.5 kg(12 lbs) infant will
suddenly become a 110kg(240lbs) force on a person’s arms. An infant or child
should be secured in an appropriate child restraint.
{ Warning
Children who are up against, or very close to, any airbag when it inflates can
be seriously injured or killed. Never put a rear-facing child restraint in the
front outboard seat. Secure a rear-facing child restraint in a rear seat. It
is also better to secure a forward-facing child restraint in a rear seat. If
you must secure a forward-facing child restraint in the front outboard seat,
always move the front passenger seat as far back as it will go.
Child restraints are devices used to restrain, seat, or position children in
the vehicle and are sometimes called child seats or car seats.
There are three basic types of child restraints:
· Forward-facing child restraints
· Rear-facing child restraints
· Belt-positioning booster seats
The proper child restraint for your child depends on their size, weight, and
age, and also on whether the child restraint is compatible with the vehicle in
which it will be used.
For each type of child restraint, there are many different models available.
When purchasing a child restraint, be sure it is designed to be used in a
motor vehicle and is designed by a genuine child restraint manufacturer. If it
is, the child restraint will have a label saying that it meets federal motor
vehicle safety standards.
The instruction manual that is provided with the child restraint states the
weight and height limitations for that particular child restraint. In
addition, there are many kinds of child restraints available for children with
special needs.
{ Warning
To reduce the risk of neck and head injury in a crash, infants and toddlers
should be secured in a rear-facing child restraint until age two, or until
they reach the maximum height and weight limits of their child restraint.
{ Warning
A young child’s hip bones are still so small that the vehicle seat belt may
not remain low on the hip bones, as it should. Instead, it may settle up
around the child’s abdomen. In a crash, the belt would apply force on a body
area that is unprotected by any bony structure. This alone could cause serious
or fatal injuries. To reduce the risk of serious or fatal injuries during a
crash, young children should always be secured in an appropriate child
restraint.
Seats and Restraints 63 Child Restraint Systems
Rear-Facing Infant Restraint A rear-facing child restraint provides restraint
with the seating surface against the back of the infant. The harness system
holds the infant in place and, in a crash, acts to keep the infant positioned
in the restraint.
64 Seats and Restraints
Forward-Facing Child Restraint A forward-facing child restraint provides
restraint for the child’s body with the harness.
Booster Seats
A belt-positioning booster seat is used for children who have outgrown their
forwardfacing child restraint. Boosters are designed to improve the fit of the
vehicle seat belt system until the child is large enough for the vehicle seat
belts to fit properly without a booster seat. See the seat belt fit test in
Older Children 0 60.
Securing an Add-On Child Restraint in the Vehicle
{ Warning
A child can be seriously injured or killed in a crash if the child restraint
is not properly secured in the vehicle. Secure the child restraint properly in
the vehicle using the vehicle seat belt or LATCH system, following the
instructions that came with that child restraint and the instructions in this
manual.
To help reduce the chance of injury, the child restraint must be secured in
the vehicle. Child restraints must be secured in vehicle seats by the lap belt
portion of a lap-shoulder belt, or by the LATCH system. See Lower Anchors and
Tethers for Children (LATCH System) 0 66 for more information. Never use non-
regulated
aftermarket anchors or attachments to secure a child restraint. Children can
be endangered in a crash if the child restraint is not properly secured in the
vehicle.
When securing an add-on child restraint, refer to the following:
· Instruction labels provided on the child restraint
· Instruction manual provided with the child restraint
· This vehicle owner’s manual
The child restraint instructions are important, so if they are not available,
obtain a replacement copy from the manufacturer.
Keep in mind that an unsecured child restraint can move around in a collision
or sudden stop and injure people in the vehicle. Be sure to properly secure
any child restraint in the vehicle –even when no child is in it.
In some areas Certified Child Passenger Safety Technicians (CPSTs) are
available to inspect and demonstrate how to correctly use and install child
restraints. In the U.S., refer to the National Highway Traffic Safety
Administration (NHTSA) website to locate the nearest child safety seat
inspection station. For CPST availability in Canada, check with Transport
Canada or the Provincial Ministry of Transportation office.
Securing the Child Within the Child Restraint
{ Warning
A child can be seriously injured or killed in a crash if the child is not
properly secured in the child restraint. Secure the child properly following
the instructions that came with that child restraint.
Where to Put the Restraint
According to accident statistics, children and infants are safer when properly
restrained in an appropriate child restraint secured in a rear seating
position. Whenever possible, children aged 12 and under should be secured in a
rear seating position. Never put a rear-facing child restraint in the front.
This is because the risk to the rear-facing child is so great if the airbag
deploys.
{ Warning
A child in a rear-facing child restraint can be seriously injured or killed if
the front passenger airbag inflates. This is because the back of the rear-
facing child restraint would be very close to the inflating airbag. A child in
a forward-facing child restraint can be seriously injured or killed if the
front passenger airbag inflates and the passenger seat is in a forward
position.
Even if the passenger sensing system has turned off the front passenger
frontal airbag, no system is fail-safe. No one can guarantee that an airbag
will not deploy under some unusual circumstance, even though it is turned off.
Secure rear-facing child restraints in a rear seat, even if the airbag is off.
If you secure a forward-facing child restraint in the front seat, always move
the front passenger seat as far back as it will go. It is better to secure the
child restraint in a rear seat.
See Passenger Sensing System 0 55 for additional information.
Seats and Restraints 65
When securing a child restraint with the seat belts in a rear seat position,
study the instructions that came with the child restraint to make sure it is
compatible with this vehicle.
Child restraints and booster seats vary considerably in size, and some may fit
in certain seating positions better than others. Do not install a child
restraint in any rear seating position where it cannot be installed securely.
Depending on where you place the child restraint and the size of the child
restraint, you may not be able to access adjacent seat belts or LATCH anchors
for additional passengers or child restraints. Adjacent seating positions
should not be used if the child restraint prevents access to or interferes
with the routing of the seat belt.
Adjust the seat in front of a child restraint to ensure proper installation
according to the child restraint manual. Move the front seat forward to avoid
contact between the child restraint and the seat or any accessories mounted to
the seat.
Wherever a child restraint is installed, be sure to follow the instructions
that came with the child restraint and secure the child restraint properly.
66 Seats and Restraints
Keep in mind that an unsecured child restraint can move around in a collision
or sudden stop and injure people in the vehicle. Be sure to properly secure
any child restraint in the vehicle — even when no child is in it.
Lower Anchors and Tethers for Children (LATCH System)
The LATCH system secures a child restraint during driving or in a crash. LATCH
attachments on the child restraint are used to attach the child restraint to
the anchors in the vehicle. This system is designed to make installation of a
child restraint easier.
In order to use the LATCH system in your vehicle, you need a child restraint
that has LATCH attachments. LATCH-compatible rearfacing and forward-facing
child seats can be properly installed using either the LATCH anchors or the
vehicle’s seat belts. Do not use both the seat belts and the LATCH anchorage
system to secure a rear-facing or forward-facing child restraint.
Booster seats use the vehicle’s seat belts to secure the child and the booster
seat. If the manufacturer recommends that the booster
seat be secured with the LATCH system, this can be done as long as the booster
seat can be positioned properly and there is no interference with the proper
positioning of the lap-shoulder belt on the child.
Make sure to follow the instructions that came with the child restraint, and
also the instructions in this manual.
When installing a child restraint with a top tether, you must also use either
the lower anchors or the seat belts to properly secure the child restraint. A
child restraint must never be attached using only the top tether.
For a forward-facing 5-pt harness child restraint where the combined weight of
the child and restraint are up to 29.5kg(65lbs), use either the lower LATCH
anchorages with the top tether anchorage, or the seat belt with the top tether
anchorage. Where the combined weight of the child and restraint is greater
than 29.5 kg(65lbs), use the seat belt with the top tether anchorage only.
Restraint Type
Rear-Facing Child Restraint Rear-Facing Child Restraint Forward-Facing Child
Restraint Forward-Facing Child Restraint
Seats and Restraints 67
Recommended Methods for Attaching Child Restraints
Combined Weight of the Child + Child Restraint
Use Only Approved Attachment Methods Shown with an X
LATCH Lower Anchors Seat Belt Only Only
LATCH Lower Anchors Seat Belt and Top Tether and Top Tether Anchor Anchor
Up to 29.5 kg(65 lbs)
X
X
Greater than 29.5 kg (65 lbs)
Up to 29.5 kg(65 lbs)
X
X
X
Greater than
X
29.5 kg (65 lbs)
68 Seats and Restraints
See Securing Child Restraints (With the Seat Belt in a Rear Outside Seat
Position) 0 73 or Securing Child Restraints (With the Seat Belt in the Front
Seat) 0 75.
Child restraints built after March 2014 are labeled with the maximum child
weight, with which the LATCH system can be used for installing the child
restraint.
The following explains how to attach a child restraint with these attachments
in the vehicle.
Not all vehicle seating positions have lower anchors. In this case, the seat
belt must be used (with top tether where available) to secure the child
restraint. See Securing Child Restraints (With the Seat Belt in a Rear Outside
Seat Position) 0 73 or Securing Child Restraints (With the Seat Belt in the
Front Seat) 0 75.
Lower Anchors
Lower anchors (1) are metal bars built into the vehicle. There are two lower
anchors for each LATCH seating position that will accommodate a child
restraint with lower attachments (2).
Top Tether Anchor
A top tether (3, 4) is used to secure the top of the child restraint to the
vehicle. A top tether anchor is built into the vehicle. The top tether
attachment hook (2) on the child restraint connects to the top tether anchor
in the vehicle in order to reduce the forward movement and rotation of the
child restraint during driving or in the event of a crash. The child restraint
may have a single tether (3) or a dual tether (4). Either will have a single
attachment hook (2) to secure the top tether to the anchor.
Some child restraints with a top tether are designed for use with or without
the top tether being attached. Others require the top tether always to be
attached. In Canada, the law requires that forward-facing child restraints
have a top tether, and that the tether be attached. Be sure to read and follow
the instructions for your child restraint.
Lower Anchor and Top Tether Anchor Locations
To assist in locating the lower anchors, each second row anchor position has a label near the crease between the seatback and the seat cushion.
Seats and Restraints 69
To assist in locating the top tether anchors, the top tether anchor symbol is
near the top tether anchors.
Rear Seat } : Seating positions with top tether anchors. H : Seating positions with two lower anchors.
Top Tether Anchors
The top tether anchors for each rear seating position are on t
References
- Acura Canada: Luxury Sedans, SUVs & Sports Cars.
- American Honda Motor Co., Inc. - Official Site
- my-garage.ca
- MyGarage
- mygarage.com
- MyGarage
- MyGarage
- Welcome to OnStar | Safety and Evolving In-Vehicle Tech
- LG Open Source
- Acura Canada: Luxury Sedans, SUVs & Sports Cars.
- Acura Canada : berlines de luxe, VUS, et voitures sport
- dtsc.ca.gov/hazardouswaste/
- Owner Manuals, Service Manuals, Wiring Diagrams, Service Bulletins - Helm Incorporated
- Homelink
- Home Page - Immersion - Haptic Technology
- Welcome to OnStar: In-Vehicle Safety and Security System
- Welcome to OnStar | Safety and Evolving In-Vehicle Tech
- OPEN SOURCE
- P65Warnings.ca.gov
- Recycle My Battery | General Motors
- Safer Car Vehicle Safety, Ratings and Recalls | NHTSA
- SiriusXM: Music, Sports, Talk & Podcasts, Live & On Demand
- Road transportation
- Service Express
- Honda Canada : Berlines, véhicules à hayon, VUS, minifourgonnettes et hybrides
- Honda Canada Privacy Policy | Honda Canada
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>