SERVER 87750 ConserveWell Utensil Holder with Timer User Guide
- June 5, 2024
- SERVER
Table of Contents
SERVER 87750 ConserveWell Utensil Holder with Timer
Tips and tricks to help you get started with your new ConserveWell
Tip: 1
Remove unit from the box. Wash all parts properly before use.
Never immerse the complete unit into water. Electrical shock could occur.
Tip: 2
Install the unit by selecting a wall location or sturdy vertical surface for mounting. Determine the proper mounting hardware you will need to supply. Locate mounting holes approximately 27 cm (10-5/8”) apart. Key slot mounting makes removal easy
Tip: 3
Fill each pan with approximately 0.7 liters (3/4 quart) of HOT water. Insert both pans of water into a basin. Pour water into pans only
Tip: 4
Plug the cord into a power source. Turn unit on.
Tip: 5
Only use with utensils safe in high temperatures. Do not use liquid or gel- filled utensils. Handles become extremely hot.
Tip: 6
When water needs to be changed out, remove and empty pans of water. Pans and water will be hot. Take proper care while removing pans. Carefully pour water down a drain.
Tip: 7
Refill and return water pans to the basin. Fill each pan with approximately 0.7 liters (3/4 quart) of HOT water. Insert both pans of water into a basin. Pour water into pans only.
Tip: 8
Be aware of the water temperature. Help prevent bacteria growth. The FDA warns that bacteria grow most rapidly in the range of temperatures between 410F – 1350F. (50C – 570C.)
Tip: 9
For units that have a countdown timer, press RESET to start the countdown cycle. The timer is factory preset for 4-hour cycles. When the timer ends, an alarm will beep and the display will indicate “END”. Press RESET to stop the alarm, change out the water and press RESET to restart the timer. See manual for instructions for reprogramming timer.
WANT TO LEARN MORE?
Visit server-products.com/manual-more for your manual, part breakdown, support videos, and more. spsales @server-products.com | 800.558.8722