Nedis VSWI34721AT HDMI Switch User Manual
- June 5, 2024
- nedis
Table of Contents
VSWI34721AT HDMI Switch
User Manual
Preface
Thank you for purchasing the Nedis VSWI34721AT.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
This product is exclusively intended to switch between one USB-C and/or two HDMI sources on one display.
The product is intended for indoor use only.
The product is not intended for professional use.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
HDMI Switch
---|---
Article number
|
VSWI34721AT
Dimensions (l x w x h)
|
96 x 61 x 22 mm
Supported Resolutions
|
4K @ 60 Hz, 2160p, 1080p and all possible resolutions below
Input DDC signal
|
5 V p-p (TTL)
Video output
|
HDMI
HDMI version
|
HDMI 2.0
Vertical frequency range
|
50 / 60 Hz
Video Bandwidth
|
18 Gb/s / 600 MHz
Operating temperature
|
-20 °C – 70 °C
Operating humidity
|
10 – 85% RH (no condensation)
Power supply
|
5 VDC / 1 A
Power consumption
|
5 W
Main parts (image A)
A
1. USB-C input
2. Infrared receiver
3. Power indicator LED
4. Input indicator LED
5. Select button
6. Power supply port
7. HDMI output
8. HDMI input
9. Power supply
10. Power button
11. Input source button (numbers)
12. Input source button (left/right)
Safety instructions
WARNING
- Only use the product as described in this manual.
- Only use the provided power supply.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not plug or unplug the power supply with wet hands.
- Do not immerse the product in water.
- Do not expose the product to direct sunlight, naked flames or heat.
- Place the product on a stable and flat surface.
- Do not drop the product and avoid bumping.
- Do not open the product.
- Keep the product out of reach from children.
Safety symbols on the product
Icon
|
Description
---|---
|
Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.
|
Indication that the producer of the packaging material complies with the Packaging Law and has contributed to the costs of the ‘Green Dot’ waste separation and recycling system.
|
Indication to explain that the product can be recycled.
|
Indication to explain that the product needs to be collected separately when disposed. Do not throw in the trash bin.
Installation
Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Connecting the product (image B)
See image B for a connection overview.
Use
Using the product
Press A 5, A12 to select an input source.
Press A 11 to cycle between the input sources.
Maintenance
- Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
- Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product VSWI34721AT from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via webshop.nedis.com/VSWI34721AT#support
For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Phone: +31 (0)73-5991055 (during office hours)
Nedis B.V., de Tweeling 28
5215 MC ’s-Hertogenbosch, the Netherlands
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>