CACHFIRES BIO-10-060 Oregon Wall Mounted Bioethanol Fireplace Instruction Manual

June 9, 2024
CACHFIRES

CACHFIRES BIO-10-060 Oregon Wall Mounted Bioethanol Fireplace Instruction Manual
CACHFIRES BIO-10-060 Oregon Wall Mounted Bioethanol
Fireplace

WARNINGS
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE!

  • Do not fill while hot

  • Do not fill while burning
    Symbol

  • Do not overfill
    Symbol

  • Flammable}

  • Keep away from children

RECOMMENDED FUEL
LIQUID BIOETHANOL FOR BIOETHANOL FIREPLACES
95% – 97.5% ALCOHOL

Fireplace Clearance

Read and understand these instructions completely before using your CACH Fires bioethanol fireplace.

These bioethanol fireplaces are suitable for indoor use only.

Exposing the fireplace to rain, snow or similar weather conditions will drastically decrease the lifespan of the fireplace and will make it rust and corrode.

Before use ensure that the fireplace is positioned by the compulsory minimum clearances outlined below and that the minimum room size is met:

Ocean 40m3 (1415ft3 )
Oregon 40m3 (1415ft3 )

WARNING: Ensure that your fireplace is positioned away from flammable materials and other sources of ignition at all times. Pay very close attention to items that may move as a result of wind and drafts. For example plants/ curtains/paper and the like. The bioethanol burner within the fireplace must never come into direct contact with flammable materials.

The recommended installation height is 800-1200mm [35.4 – 47.2in] from the floor – but varies depending on the placement of installation. Minimum floor clearance is 200mm [7.8in].

Side clearance to fixed and stable furniture must remain a minimum of 600mm [23.6in].

Overhead clearance to flammable and heat-sensitive items must be a minimum of 1000mm [47.2in] for “closed top” fireplaces and 1500mm [59in] for “open top”.

The fireplaces can be mounted on all types of walls, as long as it can carry the weight of the fireplace.

![Fireplace

Clearance](https://manuals.plus/wp- content/uploads/2023/03/Screenshot_7-242.jpg)
![Fireplace

Clearance](https://manuals.plus/wp- content/uploads/2023/03/Screenshot_8-222.jpg)
![Fireplace

Clearance](https://manuals.plus/wp- content/uploads/2023/03/Screenshot_9-216.jpg)

Assembly and Mounting

Models: Oregon

  1. Remove the fireplace and all parts from the packaging.

  2. Attach the door handle to the fireplace using the two included screws and washers.

  3. Attach the mounting bracket to the wall using the included rawlplugs and screws.
    When securely fastened, the fireplace can be hung upon the mounting bracket.
    NOTE: Make sure that the mounting bracket is installed in horizontal level.
    ![Assembly and

Mounting](https://manuals.plus/wp- content/uploads/2023/03/Screenshot_12-160.jpg)

  1. Insert the bioethanol burner into the cutout in the fireplace.
    ![Assembly and

Mounting](https://manuals.plus/wp- content/uploads/2023/03/Screenshot_13-155.jpg)

Models: Ocean

  1. Remove the fireplace and all partsfrom the packaging.
  2.  Attach the bottom bracket to the fireplace. (The two brackets are identical)
  3. Fasten the top mounting bracket to the wall using screws and plugs. Make sure to mount the bracket horizontally level. Attach the fireplace to the top bracket using the included screws.
  4. (Optional) Attach the heat deflector to the top of the fireplace.
  5. Insert the bioethanol burner into the curved bottom of the fireplace.

Decoration

Bioethanol fireplace decoration is not recommended to use in this bioethanol fireplace.

Use and operation

Operate the bioethanol burner according to the bioethanol burner user manual included with the firep

Use and operation
Use and operation
Use and operation

CACH FIres
EU Tel: +45 60 66 96 03
UK Tel: +44 1224 011575
Email: info@cachfires.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals