Peaktop 1613S 20 x 40 Inch Outdoor Party Tent User Manual
- July 7, 2024
- Peaktop
Table of Contents
Peaktop 1613S 20 x 40 Inch Outdoor Party Tent
User Manual
for Peaktop Outdoor Party Tent
Please read, understand, and practice the guidelines in this user manual
before use, and keep it for future reference. 20′ x 40′ The Parts List varies
by the model.
Please refer to the correct list for the product you have.
IMPORTANT
We’d love to hear from our customers. If you have any questions about the
manual or would like us to help in any way, please feel free to contact the
support team. We will reply in 12 hours (business days).
- Check the Spam and your email Settings if you do not receive a reply in time as it is probably blocked because our support team will always get back to you no later than the timeframe.
- Add the following email address to your CONTACT LIST in case of any blocking.
- Email: gardenia.gmi@gmail.com or maxlead.us@gmail.com
This user manual applies to Peaktop Outdoor Party Tent. It will help you to
get to know your carport. Please read the guidelines in this manual and keep
the manual for future reference.
We may update the manual without notice in advance. You can always search
“Peaktop Outdoor Instructions” online for the latest version.
Safety Instructions
You should read, understand, and practice safety instructions in this chapter. For any damages due to not obeying guidelines as instructed, the owner (user) should take full responsibility.
Please ALWAYS weigh down your party tent with sandbags, auger anchors, and
(or) pegs.
Please do NOT light a fire inside and keep any heat source away from your party
tent. Please do NOT place something heavy on the top as the party tent is
designed to be a temporary structure.
Do NOT throw away the original packaging cartons in case of a return or an
exchange.
- Please ALWAYS weigh down your party tent with sandbags, auger anchors, and (or) pegs.
- Please do NOT place something heavy on the top as the party tent is designed to be a temporary structure.
- Please do NOT light a fire inside and keep any heat source away from your party tent.
- Please do NOT throw away the original packaging cartons in case of a return or an exchange.
Warning!
Do NOT use this product in severe weather such as high wind, heavy rain, heavy
snows, etc. Please take down the structure for any potential inclement
weather. Damages caused by improper use will NOT be covered by the warranty.
20’X40’ Party Tent（Model #1613S）
You’ll receive six (6) boxes for both models. Please identify the packages by
referring to the table Package Contents for Shipping Cartons. Please also pay
particular attention to making sure all parts are numbered and graphically
indexed as shown on the Parts List, so does the quantity for each part. If you
need any help, please contact us promptly
(gardenia.gmi@gmail.com or
maxlead.us@gmail.com) with the ORDER NUMBER,
REQUIRED PARTS (NAME, QUANTITY, and PART NUMBER), PICTURES (OR VIDEO CLIPS, IF
APPLICABLE), we’ll get back to help out soon.
Parts List for Model #1613S
Package Contents for Shipping Cartons
| Carton Number | Parts Included |
|---|---|
| Box #1 |
- 14 x Part #3 (Side Connecting Pole)
- 24 x Part #8-2 (Wire Rope)
Box #2|
- 18 x Part #2 (Top Connecting Pole)
Box #3|
- 12 x Part #7 (Ground Bar)
- 7 x Part #6 (Support Beam)
Box #4|
- 14 x Part #1 (Leg Steel Pole)
Box #5|
- 4 x Part #4 (3-Way Steel Pole)
- 10 x Part #5 (4-Way Steel Pole)
- 2 x Part #A (3-Way Corner Connector)
- 5 x Part #B (4-Way Corner Connector)
- 4 x Part #C (L-Shape 2 Corner Foot Base)
- 10 x Part #D (T-Shape 2 Corner Foot Base)
- 12 x Part #8-1 (Cable Clip)
- 4 x Part #E (Ratchet Strap)
- 14 x Part #K (L-Shaped Peg)
- 12 x Part #L (U- Shaped Peg)
- 10 x Part #H (M8X50 Screw1)
- 14 x Part #I (M6X70 Screw2)
- 4 x Part #J (M8X50 Screw3)
- 90 x Part #M (Bungee Ball)
Box #6|
- 1 x Part #F (Cover)
- 2 x Part #G (Zipper Door)
Assembly Steps for Model #1613S
Before the assembly, please check to make sure that you have all parts listed in the Parts Lists.
-
Step 1. Form the top frame as per the given layout. You’ll use the poles of 18 x #2, 14 x #3, 4 x #4, 10 x #5 and the connectors 2 x #A, 5 x #B. Please also:
- Reinforce the top frame with the 7 x poles (#6) and use 14 x M6X70 Screws (#I) at both ends.
- Combines the Cable Clip (#8-1) and Wire Rope (#8-2) into one complete Steel Rope Set, then hang the Steel Rope Set between pole #3 on the side.
-
Step 2. Finish assembling the supporting frame by:- Connecting 7 x leg poles (#1) with the poles of #4 and #5 on the top frame accordingly and lift the structure from the other side (SEVERAL ADULTS REQUIRED!)
- Connecting the poles (#1) with (#7) by using the 4 x L-Shaped Foot Bases (#C) and the 10 x T-Shaped Foot Bases (#D). You’ll use 4 x M8X50 Screws (#J) to tighten 4 x leg poles(#1) with the L-Shaped Foot Bases (#C) and 10 x M8X50 Screws (#J) to tighten 10 x leg poles(#1) with the T-Shape 2 Corner Foot Bases (#D).
- Fix the structure to the ground by inserting the L-Shaped Pegs (#K) into the hole of foot bases and locking pole #7 with U- Shaped Pegs (#L).
-
Step 3. Put the Cover (#F) on the frame.
IMPORTANT
The built-in webbing should face down on the front and rear of the corner of the structure.
Please make sure the cover hangs at all four corners equally.
Please place the elastic part of the edge of the cover at the position of the zipper door.
-
Step 4. Assemble the rest of the accessories.
- Assemble the 4 x Ratchet Strap (#E) at the four corners and thread the built-in webbing of the cover into the Ratchet Strap (#E), then hook the Ratchet Strap (#E) with the L-Shape 2 Corner Foot Base (#C).
- Thread the 48 x Bungee Ball (#M) through the eyelet at the bottom of the cover and tie to pole #7.
Reminder
For the tying method of the Ratchet Strap, please refer to the video on the product webpage.
-
Step 5. Attach the 2 x Zipper Doors (#G) to the frame with Bungee Balls (#M).
Maintenance
To help you maintain your party tent in optimal condition, please refer to our suggestions below.
- When in use, make sure to brush off dirt and debris and keep away from potentially damaging objects.
- Clean the cover and sidewalls with water and mild detergent (or non-detergent, if applicable) only.
- To prevent your carport from rust and mildew, please clean all disassembled parts and dry them completely before storing them.
- Store the disassembled carport in a cool and dry place and keep away from animals.
- Inspect your tent carefully before and after each use. If any rips, tears, or damage is found, stop using it and email the support team (gardenia.gmi@gmail.com or maxlead.us@gmail.com) with the ORDER NUMBER, PART
- NUMBER, QUANTITY REQUIRED, and ANY PHOTOS (OR VIDEO CLIPS, IF APPLICABLE), we will get back to you in 12 hours.
Warranty
The limited warranty covering the materials and the craftsmanship under normal use and service conditions takes effect from the purchase date (on the invoice). Please note that the order purchase proof (order number or shipping information on the shipping carton) is the only valid evidence to claim for warranty.
- 12-month warranty for the Steel Pole, Cover, and Zipper Door.
- A lifetime warranty for all the small accessories not mentioned above, including the Connectors, Pegs, Auger Anchors, Foot Bases, etc.
Reminder
- In the event that you failed to access your order information online, we strongly advise you to keep the original packaging and shipping carton(s) because they are treated as a proof of purchase.
- To get what you need as soon as possible, we strongly suggest you provide all of the following information at your first inquiry:
- Order number
- Required parts (name, quantity, and part number)
- Quantity required for each part
- Pictures (or video clips, if applicable)
Warning
- Restructuring the product without written permission from Peaktop Outdoor in advance would VOID the warranty.
- Damages due to improper use in severe weather conditions, including but not limited to high winds, heavy rain, sleet, snow, etc., will NOT be covered by the warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>